Does the 2021 Geely Boyue have a pre-installed dash cam port?

1 Answers
KadenLee
07/29/25 8:09pm
There is a pre-installed dash cam port. Location of the pre-installed dash cam port: The USB port is located inside the center armrest between the driver and front passenger seats. Simply press the front button to open the armrest, and you will see a USB port along with an AUX port. Detailed specifications of the Geely Boyue: Dimensions are 4519×1831×1694mm (length×width×height) with a wheelbase of 2670mm. In terms of powertrain, the Geely Boyue offers diversified options: the 1.8TD engine and 2.0L naturally aspirated engine can be paired with either a 6-speed manual transmission or the Australian DSI 6-speed automatic transmission, forming multiple powertrain combinations.
Was this review help?
16
0
Share
More Forum Discussions

What Causes the Squeaking Sound When Turning the Steering Wheel in a BMW 3 Series?

The reasons for the squeaking sound when turning the steering wheel in a BMW 3 Series are: 1. Aging of the steering tie rod ball joint—this requires replacing the steering tie rod ball joint, and a wheel alignment is needed after replacement; 2. Leaking of the steering gear dust cover—replacing the dust cover and reapplying grease can resolve the issue. Precautions regarding the squeaking sound when turning the steering wheel: 1. If the noise comes from inside the steering wheel, the issue is likely caused by the clock spring (airbag coil). Remove the steering wheel clock spring, apply some grease, and check if the noise persists. If it does, the clock spring may need replacement, or the airbag fuse can be removed to prevent accidental airbag deployment; 2. If the noise is very loud during steering, it may be due to excessive gear clearance in the steering gear, requiring replacement of the steering gear.
11
1
Share

What are the differences between the new and old Citroën models?

Differences include a slight price reduction and a refreshed, more youthful appearance after a 'facelift'. Exterior differences: Citroën has equipped the third-generation C5 with the latest family 'ensemble' similar to the C6, featuring an integrated design that spans the entire front fascia, giving it a more youthful visual appeal. Compared to the older model, it maintains a dignified and imposing presence while appearing very spirited, aligning well with current popular aesthetics. Rear differences: For the rear, the new model has eliminated the ducktail spoiler design, no longer emphasizing a sporty effect, but the overall shape is more imposing and better suited to the mid-size car positioning. The taillights are one of the highlights of the third-generation Citroën C5, with a redesigned shape and internal structure, featuring full LED lighting. When illuminated, the effect resembles the number '88', which is why the official design is called the 'Quad-8' matrix taillights.
17
1
Share

What are the differences between Audi A3 and A4?

The differences between Audi A3 and A4 are as follows: Different fuel tank capacity: The fuel tank capacity of A3 is 51L; while the fuel tank capacity of A4 is 54L. Different horsepower: The maximum horsepower of A3's engine is 150 hp; while the maximum horsepower of A4's engine is 204 hp. Different engines: The Audi A3 is equipped with two engines, one is a 1.4L turbocharged engine, and the other is a 2.0L turbocharged engine; the A4 is equipped with three engines, all of which are 2.0L turbocharged engines, matched with a 7-speed dual-clutch transmission. Different models: The Audi A3 is a compact car; the A4 is a mid-size car, with different length, width, and height.
13
2
Share

Why does the car air conditioner cool but not drain water?

The reason why the car air conditioner cools but does not drain water is due to a lack of Freon. The functions of the car air conditioner are: 1. To achieve the cooling effect by continuously cycling the refrigerant through phase changes; 2. To remove dust, odors, smoke, and toxic gases from the air inside the car, making the interior air fresher, and to humidify the air inside the car. The maintenance methods for car air conditioners are: 1. Do not set the temperature too low; 2. Control the direction of the air outlet; 3. Do not use it for extended periods; 4. Appropriately turn on high airflow; 5. Turn off the air conditioner when driving at low speeds. The precautions for using the air conditioner are: 1. Do not set the temperature too low; 2. Control the direction of the air outlet; 3. Avoid prolonged use; 4. Appropriately turn on high airflow; 5. Turn off the air conditioner when driving at low speeds.
13
1
Share

Where is the drainage hole of the Envision door located?

The drainage outlets of the Envision door are located at the lower part of the door panel, with at least two drainage outlets per door in general. Reasons for clogged door drainage holes: Most drainage holes at the bottom of the door panel do not have hoses for guidance; rainwater flows directly through the rust-proofed door panel and drains out. Due to the low position of the drainage holes, vehicles frequently driven on muddy roads are prone to having the drainage holes blocked by mud. Owners should pay attention to regular checks, as once the door drainage holes are clogged, water accumulation inside the door panel can damage the window regulator, audio system, and central door lock. Methods to clean clogged door drainage holes: The door drainage holes can be unclogged with hard objects such as iron wires. Special care should be taken when cleaning the drainage holes hidden under the rubber sealing strips to avoid damaging the seals.
1
0
Share

What are the causes of brake noise in the Envision?

ABS abnormal operation: The normal activation of ABS The working process of ABS is actually a cyclic process of locking-releasing-locking-releasing, keeping the vehicle in a state of critical locking with intermittent rolling. When the ABS is triggered by sudden hard braking, a clunking sound will occur. This noise is normal, and at this time, simply press the brake pedal firmly to the floor. Brake pad/disc corrosion: Brake pad/disc rust After prolonged parking, especially in humid climates or after rain, some rust or dirt may appear on the brake discs or pads. This can usually be resolved by driving for a while, or you can apply butter or specialized lubricating oil to the connection between the brake pads and the brake calipers. Improper installation: Installation issues If the brake pads are installed incorrectly or the model does not match, noise may also occur. You can have the brake pads reinstalled. When installing brake pads, car owners should go to a professional auto repair shop for the job.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.