Does the 2021 CR-V Earth Dream engine still have oil dilution issues?

1 Answers
SerenityFitz
07/29/25 8:40pm
2021 Honda CR-V models do not experience oil dilution issues. Here are the detailed explanations: 1. Cause: This typically occurs when the engine injects excessive gasoline during startup. Sometimes due to over-injection and incomplete combustion, excessive cylinder wall pressure forces gasoline into the crankcase. Normally, gasoline would evaporate when the engine reaches operating temperature, but frequent cold starts and cold weather can prevent the oil from warming up sufficiently, making it difficult for gasoline to evaporate, thus leading to increasing oil levels. 2. Company actions: Dongfeng Honda announced a recall plan, deciding to recall 130,455 CR-V vehicles equipped with 1.5T engines produced between February 14, 2017 and February 27, 2018 starting from May 22, 2018. The recall measures include: reprogramming the ECT and TCU to primarily increase fuel injection pressure and reduce fuel injection quantity.
Was this review help?
14
4
Share
More Forum Discussions

What is the standard tire pressure for a 125cc scooter?

This type of motorcycle is recommended to have a front tire pressure of around 170kpa and a rear tire pressure of around 220kpa. Here are some maintenance tips for 125cc scooters: 1. Engine: The engine is put to the test during long-distance rides, as its temperature rises relatively quickly during operation. High temperatures can easily lead to decreased performance and excessive wear. To address this, it's advisable to use high-quality lubricating oil, and in some cases, synthetic lubricating oil may be necessary. 2. Related systems: The filtration performance and air intake of the intake system can affect the engine's combustion state; the braking system directly impacts driving safety; the walking system directly affects riding comfort. Therefore, it's important to perform relevant checks and maintenance on the intake system, braking system, and walking system.
7
3
Share

What are the length, width, and height of the Toyota Vios?

The length, width, and height dimensions of the Toyota Vios are 4435mm/1700mm/1490mm, which are official data. The length of the Toyota Vios refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The naturally aspirated engine of the Toyota Vios has a maximum power of 82kW and a maximum torque of 139 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4200 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with an 8-speed continuously variable transmission (CVT) and a 5-speed manual transmission. National regulations have specific requirements regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is intended to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
9
1
Share

What are the reasons for high fuel consumption in the Fit?

The reasons for increased fuel consumption in the Fit include insufficient tire pressure, tire wear, severe carbon buildup, and improper driving habits. Below are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: When the car starts at low speed, it is in the peak fuel consumption zone. Therefore, lightly pressing the accelerator during startup to prevent excessively high RPM can effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Regularly change the engine oil and remove carbon buildup. 4. Avoid emergency braking: Anticipate road conditions in advance to avoid emergency braking, which not only improves driving safety but also saves fuel. For example, gradually decelerate before traffic lights and use inertia to glide.
15
5
Share

Can I drive to the repair shop with a flat tire?

If there is no air leakage or the leakage is slow, you can drive at low speed to the nearest repair shop for inspection. However, if the leakage is severe, do not continue driving. Instead, replace it with a spare tire or call for assistance. Continuing to drive with severe air leakage can cause excessive damage to the tire and even deformation of the wheel rim. Solutions for tire air leakage are as follows: 1. Solution one: Continuing to drive with a leaking tire is very dangerous as it may lead to a blowout at any time. If there are no tire repair tools or an air pump in the car, immediately go to a nearby auto repair shop for handling. 2. Solution two: To ensure driving safety, you can also choose high-quality tire repair fluid that does not damage the tire and keep it in the car for emergency use. Additionally, consider opting for new tire repair methods, such as an integrated tire repair and inflation machine. 3. Solution three: Tire repair tools are convenient and efficient, allowing for simultaneous inflation and repair, easily solving tire problems. Anyone can handle them effortlessly. For example, the fifth-wheel tire repair kit from Fengjinba is such a combination, safe and effective, completing tire repair and inflation in just five minutes.
3
2
Share

How to Operate the License Plate Lottery on 12123?

Currently, the Traffic Management 12123 APP does not support applying for the lottery. Applications for the lottery can only be made on the local Small and Medium Passenger Vehicle Quota Regulation Management Information System website. Below is relevant information about the license plate lottery: 1. Process for the license plate lottery: Log in to the Small and Medium Passenger Vehicle Quota Regulation Management Information System, register an account, and log in; enter the "User Center" and click the "Apply for Incremental Quota" button; read the commitment letter and click "Next"; fill in the relevant information; confirm the details and click "Confirm"; obtain the SMS verification code; complete the application. 2. Conditions required for the license plate lottery: Residence in the city; possession of valid identification and a valid motor vehicle driver's license; no small or medium passenger vehicles registered in the city under the applicant's name, or all such vehicles under the applicant's name are registered as "cancelled" or "stolen" in the Comprehensive Application Platform for Public Security Traffic Management; no valid small or medium passenger vehicle quota in the city under the applicant's name; ineligibility to apply for a renewal quota; no overdue unused incremental quota obtained through the lottery within the past 2 years.
5
4
Share

How to Prevent Stalling During the Hill Start in Subject 2?

Drive the vehicle slowly to the entrance of the hill start section. As the vehicle begins to turn and faces the uphill lane, straighten the steering wheel when the body line of the hood aligns with the center of the wheel tracks. When ascending the slope, gradually release the clutch pedal without lifting it all at once. Relevant information about Subject 2 is as follows: 1. Introduction 1: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skill test. 2. Introduction 2: The test items for cars C1 and C2 include reversing into a parking space, parallel parking, hill start and stop, right-angle turns, and curve driving (commonly known as the S-curve), which are the five mandatory test items. In some regions, there is a sixth item: high-speed toll card collection.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.