Does the 2019 Sylphy have China 6 emission standard models?

2 Answers
McHope
07/28/25 11:43pm
The 2019 Sylphy is available in both China 5 and China 6 emission standard versions. Among them, five models meet the China 6 standard: the 1.6XE manual comfort version, 1.6XE CVT comfort version, 1.6XL manual luxury version, 1.6XV CVT intelligent connected premium version, and 1.6XV CVT intelligent connected premium version. Below is relevant information about the 2019 Sylphy: 1. The Sylphy Classic will retain the current Sylphy's exterior and interior design, with the tail badge possibly changed to 'SYLPHY Classic'. Depending on the configuration, differences between high and low trim levels of the Sylphy Classic will include features such as a sunroof, front fog lights, integrated turn signals on the exterior rearview mirrors, aluminum alloy wheels or steel wheels, and rear bumper decorations. 2. In terms of power, the Sylphy Classic will continue to use the current Sylphy's HR16 1.6L naturally aspirated engine, with a maximum power output of 93kW (126PS) and peak torque of 168N·m, paired with either a 5-speed manual or CVT transmission, meeting the China 6 emission standard.
Was this review help?
18
3
Share
SanEloise
08/12/25 4:03am
Last year, I purchased a 2019 Sylphy and specifically inquired about the emission standards because my city had already implemented the China 6 standard ahead of schedule. The salesperson clearly stated that this model had a China 6A version available, especially common in big cities. My car was produced in mid-2019, and the label indicates it meets the China 6 standard. Not only does it drive smoothly, but it also has lower fuel consumption. The China 6 standard is divided into two tiers, A and B, and in 2019, some regions implemented stricter regulations. Nissan accordingly updated the engine and exhaust system. I recommend checking the vehicle certificate or VIN code when buying a car to ensure it matches local environmental requirements. Cars meeting the China 6 standard have slightly higher resale value, making them a more reassuring choice while also helping to reduce air pollution.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

How to Handle the Steel Ball of the Cruze Check Valve Falling into the Oil Passage?

When the steel ball of the Cruze check valve falls into the oil passage, remove the fuel tank bottom cover and use an air gun to blow the oil passage to retrieve the steel ball. Below is relevant information about the check valve: 1. A check valve, also known as a non-return valve or one-way valve, is used in hydraulic systems to prevent reverse flow of oil or in pneumatic systems to prevent reverse flow of compressed air. 2. There are two types of check valves: straight-through and right-angle. The straight-through check valve is installed on pipelines with threaded connections, which come in three forms: threaded, plate, and flange connections. The hydraulic control check valve, also called a locking valve or pressure-holding valve, functions similarly to a check valve in preventing reverse oil flow. However, in hydraulic circuits requiring reverse oil flow, the control oil pressure can be used to open the check valve, allowing oil to flow in both directions. The hydraulic control check valve uses a conical valve core, ensuring excellent sealing performance. 3. When installing a check valve, pay attention to the medium flow direction to ensure it aligns with the arrow indicated on the valve body. Otherwise, it will block the normal flow of the medium.
14
3
Share

What are the reasons why the Malibu car door cannot be opened?

The reasons and solutions for the Malibu car door not opening are as follows: 1. The door cannot be opened due to extreme cold in winter. In northern regions, winter temperatures are very low, often below freezing. After washing the car, residual water can accumulate in the door handle, lock, and door frame gaps. The low temperature causes the water to freeze, locking the door and making it impossible to open in the morning. Solution: Pour warm water over the frozen door area to quickly melt the ice. Alternatively, wait until noon when the sun raises the temperature, and the door can then be opened. 2. Rear passengers cannot open the door when getting out, which is usually caused by the child lock. Solution: Simply turn off the child lock function. 3. Remote control failure. Generally, there are several reasons why the remote control cannot open the door: (1) The button response is not sensitive; (2) The battery is low; (3) Environmental factors, such as strong signal interference or shielding; (4) The anti-theft system malfunctions; (5) The remote control needs to be re-matched and encrypted. Solution: If the remote control cannot open the door, don’t panic—you can always use the key to unlock it manually.
14
1
Share

Does Fast Charging Harm New Energy Vehicle Batteries?

There is no harm to the battery. Whether it's fast charging or slow charging, neither has any impact on new energy vehicle batteries. Fast Charging (DC Fast Charging) Fast charging, also known as emergency charging, primarily involves charging stations' charging piles delivering high-voltage direct current directly to the new energy vehicle's power battery through the DC charging port. Fast charging provides charging services within a short period of 20 minutes to 2 hours by supplying a large direct current, typically ranging from 150 to 400A. DC charging piles, commonly referred to as 'fast chargers,' are fixed installations outside new energy vehicles. They use three-phase four-wire AC380V±15% at 50Hz, converting AC to DC through rectification and then adjusting voltage and current output via a DC/DC converter. This setup delivers sufficient power to meet fast charging requirements, as illustrated in Figure 1. Figure 1: DC Charging Pile for Fast Charging (DC Fast Charging) (2) Slow Charging (AC Slow Charging) Slow charging, also known as conventional charging, mainly involves using household power plugs or AC charging piles connected to the AC charging port. The onboard charger then converts 220V AC to 380V DC to charge the power battery. Slow charging typically employs constant voltage or constant current charging with a small current, usually taking 5 to 8 hours, or even 10 to 20 hours. AC charging piles, commonly called 'slow chargers,' only provide power output without charging functionality. They need to be connected to the onboard charger to charge new energy vehicles, essentially acting as a power control device. Due to the generally limited power of onboard chargers, only slow charging is possible. The method of charging via AC charging piles is shown in Figure 2. Figure 2: AC Charging Pile for Slow Charging (AC Slow Charging) (3) Differences Between Fast and Slow Charging Fast charging has the following pros and cons: large charging current, short charging time (30 minutes to 3 hours), suitable for emergency charging; it may reduce the power battery's lifespan, cannot utilize off-peak electricity, and has higher charging costs; charging stations are more expensive.
3
2
Share

How to reset the Polo maintenance reminder?

Here is the method to reset the Polo maintenance light: 1. First, turn off the ignition switch to ensure the vehicle is off. 2. Locate and press and hold the right button (reset/adjustment), which is located on the left side of the dashboard. 3. While holding the right button with your left hand, turn on the ignition switch. 4. Continue holding the "reset/adjustment" button until the maintenance light enters the reset mode, then release the right button (reset/adjustment button). 5. Press the "menu button" within 20 seconds of releasing the right button to confirm the reset. Here is some extended information about the Polo: 1. The body length is 3970mm, width is 1682mm, height is 1462mm, and the wheelbase is 2470mm. 2. The Polo has a relatively heavy body, high safety standards, and a stylish design. The side turn signals use LED, improving driving visibility. 3. The fuel consumption per 100 kilometers ranges between 6.5 liters and 8.8 liters, the fuel tank capacity is 45 liters, and the top speed is 240 km/h. 4. The available engines include turbocharged and naturally aspirated types, and the matched transmissions include dual-clutch, automatic, and manual.
5
3
Share

Where is the VIN located on the imported Ford Edge?

The VIN of the imported Ford Edge is located on the firewall in the engine compartment or under the front passenger seat. Below is additional information about the imported Edge: 1. It is a mid-size SUV with body dimensions of 4878mm in length, 1925mm in width, 1734mm in height, and a wheelbase of 2850mm. 2. It has a fuel tank capacity of 69L and a curb weight of 1850kg. 3. It features a MacPherson strut front suspension and a multi-link rear suspension, powered by a 2.0L turbocharged engine with a maximum horsepower of 245ps, maximum power of 180kw, maximum torque of 390nm, paired with an 8-speed automatic transmission. Below is an introduction to the VIN of the imported Edge: 1. The 1st digit identifies the country/region of origin, indicating the assembly country/region. 2. The 2nd digit identifies the manufacturer of the Ford Edge. 3. The 3rd digit identifies the manufacturer's division or conventional vehicle type. 4. The 4th digit indicates the body series, i.e., the chassis series. 5. The 5th digit indicates the engine type. 6. The 6th to 7th digits indicate the model within this body series. 7. The 8th digit is the occupant safety system code. 8. The 9th digit is the manufacturer's check digit. 9. The 10th digit indicates the vehicle year.
2
5
Share

What are the steps to start driving an Audi A4?

Press the brake with your right foot, push the one-touch start button, press the button on the left side of the gear lever, pull it backward to shift into D gear, release the brake, and step on the accelerator to start. More introduction about Audi A4 is as follows: 1. It is a popular B-class model manufactured by FAW-Volkswagen and launched in April 2003, filling the gap of domestic B-class sedans and consolidating FAW-Volkswagen's leading position in the domestic luxury car market. 2. As the first model to introduce the concept of long wheelbase and turbocharging, from B5 to B8, the sales of A4L have been enduring. The new A4 abandons the teardrop design, adds quattro four-wheel drive mode, has a more fashionable and sporty appearance, and offers more outstanding power and handling. The interior workmanship is exquisite, with rich technological configurations and ample space, making it highly practical among B-class models. 3. It is equipped with Audi's patented quattro all-wheel drive system as standard, providing the vehicle with double the adhesion. This system can automatically, accurately, and timely distribute the grounding force of each wheel when the vehicle is turning or braking on various complex road surfaces, thereby improving the directional stability and traction of the vehicle under complex conditions.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.