Does the 2019 Bora have front and rear anti-collision beams?

1 Answers
StGabrielle
07/29/25 4:30pm
The 2019 Volkswagen Bora is equipped with both front and rear anti-collision beams. The front and rear anti-collision beams have the following advantages: Front anti-collision beam: The front anti-collision beam can protect many important components in the front of the car, thereby reducing the owner's repair costs. Rear anti-collision beam: The rear anti-collision beam can also protect the car body, preventing damage to the body structure. The Bora is a very classic compact sedan under the Volkswagen brand, and this model enjoys good sales and reputation in China. The 2019 Volkswagen Bora is equipped with two engines: one is a 1.5-liter naturally aspirated engine, and the other is a 1.4-liter turbocharged engine. The 1.5-liter naturally aspirated engine, compliant with the China VI emission standard, has a maximum power of 83 kW, a maximum torque of 145 Nm, a maximum power speed of 6,000 rpm, and a maximum torque speed of 3,900 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission.
Was this review help?
8
5
Share
More Forum Discussions

What is teratech tire?

teratech is a Nordic Viking automotive tire. The specific introduction is as follows: 1. Tire quality: Nordic Viking automotive tires are tires specifically introduced by Continental for Chinese road conditions, featuring wear resistance, comfort, quietness, and good handling performance. 2. Tire production: There are four tread patterns available in the domestic market: CT5, PT5, HT, and AT. They are mainly produced by the Continental factory in Hefei, with SUV tires partially imported from Malaysia. 3. Company overview: Nordic Viking tires have been manufacturing tires since 1931 and are a wholly-owned Norwegian company. They hold over 50% market share in Norway. In 1990, Continental AG of Germany acquired 49% of Nordic Viking's shares, and in 1992, Continental Group of Germany fully owned Nordic Viking. The tires are equipped on models such as Volkswagen, Opel, Ford, and Volvo.
14
5
Share

Why Do You Need to Turn Right First When Making a Left Turn on an Overpass?

There are several reasons why you need to turn right first when making a left turn on an overpass: 1. Closed One-Way Road: Overpasses are generally designed as closed one-way roads. The design rule for overpasses is usually as follows: to go left after crossing the bridge, you first need to turn right after crossing the bridge; to go right without crossing the bridge, you enter the ramp directly to get onto the bridge. 2. Key Points to Note: When making a left turn, after entering the overpass or underpass, turn on the right turn signal, then make a right turn into the ramp. At the other end of the ramp, make another right turn to enter the main road. This way, two consecutive right turns achieve one left turn. Pay attention to traffic signs to determine the exit location. While driving, when approaching an overpass, reduce speed appropriately to allow sufficient time to accurately confirm the direction of the exit.
11
3
Share

What to Do If Diesel Car is Filled with Gasoline?

The solutions for a diesel car filled with gasoline are mainly: 1. Contact a specialized repair shop as soon as possible to clean the fuel tank and fuel system, and then conduct a comprehensive inspection of the engine. Do not start the engine to avoid damaging the car. 2. Find the nearest repair shop immediately to replace the gasoline, preferably also clean the fuel tank and fuel system, and replace the fuel filter. Additional information: 1. Gasoline is one of the most widely used light petroleum products and an important fuel for engines. 2. Based on the manufacturing process, gasoline components can be divided into straight-run gasoline, thermal cracking gasoline (coking gasoline), catalytic cracking gasoline, catalytic reforming gasoline, polymerization gasoline, hydrocracking gasoline, alkylation gasoline, and synthetic gasoline, etc.
13
2
Share

Which gear should be used when going uphill?

When going uphill, you should use the L gear. Here is some information about the L gear: 1. The L gear is the low gear. 2. When going downhill or on a long slope, placing the gear here can limit the car's gear to automatically stay in the lowest gear, allowing the car to use engine power for braking when going downhill. This prevents the driver from having to press the brake for a long time, which could cause the brake pads to overheat and become dangerous. Additional information: 1. Generally, automatic transmission cars have P gear (parking gear), R gear (reverse gear), N gear (neutral gear), and D gear (drive gear). It is important to use the automatic transmission properly to save fuel more efficiently. 2. When driving on flat city roads, the gear should always be in D gear, as the automatic transmission will shift gears automatically without requiring additional manual operation.
12
1
Share

Why is it not necessary to use turn signals when entering a roundabout?

Because entering the roundabout does not affect other vehicles, and the exit is uncertain when leaving the roundabout, so signals are required. Here are the relevant details: 1. Setup: Typically, roundabouts are set up at intersections with multiple roads (more than 3 roads). Except for vehicles turning right, all other vehicles heading to different intersections must enter the roundabout to navigate. The roundabout is generally designed with four lanes: the left lane is for left turns, the middle two lanes are for going straight, and the right lane is for right turns to exit the roundabout. 2. Precautions: Use turn signals correctly. There is no need to turn on the turn signal when entering the roundabout. Turning on the signal before entering the roundabout is the biggest misconception in roundabout driving, as it can easily cause misunderstandings among other drivers.
7
1
Share

Is it necessary to depress the clutch to start the car?

For the safety of yourself and passengers, it is recommended to depress the clutch when starting the engine. Additional information: 1. Depressing the clutch primarily prevents the car from suddenly lurching forward during startup, thereby avoiding accidents. This is especially crucial when starting on uphill or downhill slopes. Failure to depress the clutch could lead to unintended vehicle movement, potentially causing accidents. Therefore, the primary reason for depressing the clutch in manual transmission vehicles is safety. 2. Moreover, depressing the clutch during startup also protects the engine. Without depressing the clutch, the engine operates under excessive load, which can cause damage. While occasional instances may not cause immediate harm, prolonged neglect can gradually lead to engine issues. Hence, to safeguard the engine and prolong your vehicle's lifespan, it is advisable to depress the clutch when starting.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.