Does the 2019 Automatic Comfort Sagitar have ambient lighting?

How to Soundproof a Honda CR-V with Excessive Tire Noise?

When the Honda CR-V has excessive tire noise, a three-layer soundproofing process can be implemented. The first layer involves applying soundproofing and vibration-damping panels to reinforce the metal sheets and suppress resonance. The second layer consists of fully covering the area with soundproofing and vibration-damping panels to further reduce resonance and create a sealed enclosure, which helps optimize audio performance. The third layer involves applying sound-absorbing foam to further absorb noise. Noise inside the vehicle mainly consists of mechanical component noise (such as engine noise), friction noise between the tires and the road (road noise), collision and friction noise generated when the car cuts through the air (wind noise), external environmental sounds entering the cabin (such as the roar of passing trucks), and internal noise caused by vibrations of components like the dashboard trim. Abnormal noises from the Honda CR-V engine can be divided into two types: Cold Engine Abnormal Noise: Cold engine abnormal noise typically refers to a "tapping" sound heard from the engine compartment when starting the car after it has been parked for a long time. This noise usually disappears once the engine warms up. Hot Engine Abnormal Noise: Hot engine abnormal noise is generally more serious, as it often indicates either a component or mechanical issue. In such cases, professional repair services are required.

12

5

Share

What does it mean when the dashboard displays 'GPF regeneration required, please drive at high speed'?

The dashboard displays 'GPF regeneration required, please drive at high speed' because the gasoline particulate filter (GPF) in the car is clogged. The GPF is a ceramic filter installed in the exhaust system of gasoline engines, designed to capture particulate emissions before they enter the atmosphere. The primary function of the GPF is to reduce particulate emissions. When the indicator light in the car comes on, it means that the particulate matter accumulated in the GPF has reached a level requiring cleaning. If the indicator light is green, the situation is relatively better—simply driving at high speeds allows the GPF to self-clean the deposited particles. If the light is yellow, the solution is to increase the exhaust temperature to burn off the accumulated carbon deposits. Methods to avoid GPF clogging: Avoid refueling at small gas stations: The fuel quality at small gas stations is often questionable. If the vehicle uses fuel with more impurities, it will undoubtedly increase exhaust particulate emissions, making the GPF more prone to clogging. Avoid using low-ash oil: Low-ash oil is specifically designed for China VI-compliant vehicles. Not using low-ash oil can easily lead to DPF clogging. Avoid prolonged idling: During prolonged idling, exhaust gases cannot fully combust, leading to an increase in particulate emissions and, consequently, GPF clogging.

19

4

Share

What engine was replaced after the AE86 blew up?

AE86 was replaced with the AE101-type 4A-GEU engine after it blew up. The new engine installed in the 86 was originally a TRD racing engine used on the AE101, belonging to the Group A 4AG engine. The 4A-GE is a famous Toyota engine with a displacement of 1.6 liters. The early version produced only 130 horsepower, known as the 16-valve 4AGE. Later versions with airflow meters and pressure sensors were introduced, featuring 20 valves, commonly referred to as the silver-top and black-top 4AGE. The AE86 is a small car model within TOYOTA's COROLLA lineup. AE86 is not a name but merely a chassis code. The AE86 represents the 4th generation of the COROLLA, first produced in 1983. Previous models included TE27, TE51, TE55, TE61, TE65, and TE71, followed by the AE86 chassis. This chassis was used not only on the COROLLA LEVIN but also on the TRUENO, hence the distinction between the pop-up and fixed-headlight AE86 variants.

16

1

Share

Why Does Car Glass Shatter Spontaneously?

Car glass can shatter spontaneously mainly due to poor glass quality, uneven heating and cooling, or improper film installation. Poor glass quality: Generally, tempered glass contains impurities and bubbles. Higher-quality glass has fewer impurities and bubbles, while poor tempering can lead to quality issues. Therefore, it is advisable to choose higher-quality glass whenever possible. Uneven heating and cooling: When the temperature variation of the glass film is too extreme, stress deformation can occur in the glass, leading to shattering. Thus, it is important to monitor temperature changes inside and outside the car and perform timely maintenance. Improper film installation: During film installation, if the glass is not heated evenly and a heat gun is used to shape the film, localized heating can cause thermal expansion stress deformation, resulting in glass shattering. Therefore, it is best to have professionals handle film installation. If the windshield shatters spontaneously, pull over immediately and avoid continuing to drive. Although minor cracks can sometimes be repaired, for safety reasons, it is recommended to replace the glass entirely.

6

1

Share

Is a Winter Tire Pressure of 2.8 Bar Too High?

A winter tire pressure of 2.8 bar is too high. According to the stipulations and requirements of the international GBT2978-2008 standard, the standard tire pressure for regular tires is 2.4-2.5 bar. In winter, it is appropriate to increase the pressure by about 0.2 bar, but 2.8 bar exceeds the maximum standard tire pressure of 2.7 bar, making it too high. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; It accelerates localized wear on the central tread pattern, shortening the tire's lifespan; Increased body vibration indirectly affects the lifespan of other components; Excessive pressure causes overextension and deformation of the tire cords, reducing the elasticity of the tire body and increasing the load on the car during driving; Reduced puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, and the impact may cause internal cracks and blowouts, leading to a tire burst.

7

1

Share

How much over the speed limit is it when driving at 120 km/h in a 100 km/h zone?

Driving at 120 km/h in a 100 km/h zone on the highway constitutes a 20% over-speed violation, resulting in a fine and 3 penalty points. On highways, exceeding the speed limit by 15%-20% incurs 3 penalty points and a fine; exceeding by 50% results in 12 penalty points. Therefore, drivers need to control their speed to avoid speeding. The dangers of speeding are as follows: Speeding accelerates wear and damage to components: Speeding increases the wear on car parts. The faster the speed, the higher the engine's workload and stress, particularly on the car tires, causing significant damage, increased friction temperature, and making tires prone to aging and deformation, leading to blowouts. Extends the vehicle's braking time: The faster the speed, the greater the vehicle's inertia, and the longer the braking distance. According to relevant experimental data, under the same conditions, when speeds are 40 km/h and 60 km/h respectively, and emergency braking is applied at 25 meters from an object, the braking safety distances are 21.6 meters and 39.1 meters, respectively. Thus, accidents are more likely during emergency braking, compromising driving safety. Speeding affects vehicle stability: When driving too fast, the vehicle's stability decreases, especially when navigating curves. Due to centrifugal force, the faster the speed, the more likely the vehicle is to skid or tilt outward from the center of rotation, potentially leading to a rollover in severe cases.

6

1

Share

Does the 2019 Automatic Comfort Sagitar have ambient lighting?

How to Soundproof a Honda CR-V with Excessive Tire Noise?

What does it mean when the dashboard displays 'GPF regeneration required, please drive at high speed'?

What engine was replaced after the AE86 blew up?

Why Does Car Glass Shatter Spontaneously?

Is a Winter Tire Pressure of 2.8 Bar Too High?

How much over the speed limit is it when driving at 120 km/h in a 100 km/h zone?

How to Adjust Clutch Height?

Where Can the Vehicle Accident Number Be Checked?

Why are car steering wheels on the right side in Hong Kong?

Where to Pay the Purchase Tax for a New Car?