Does the 2018 Edge meet China 6 emission standards?

2 Answers
SanRichard
07/28/25 9:47pm
The 2018 Edge meets China 6 emission standards and is equipped with a 2.0T inline 4-cylinder turbocharged engine across all variants. The 2018 Edge is a mid-size SUV with body dimensions of 4878mm in length, 1925mm in width, and 1734mm in height, featuring a wheelbase of 2850mm, a fuel tank capacity of 70L, and a curb weight of 1845kg. It adopts a MacPherson strut front suspension and a multi-link rear suspension, delivering a maximum horsepower of 245PS, peak power of 180kW, and maximum torque of 350Nm, paired with a 6-speed automatic transmission.
Was this review help?
7
3
Share
Nunes
08/12/25 2:22am
I've been keeping an eye on the Edge model, and the 2018 Ford Edge in China generally adheres to the China 5 emission standard, not China 6. The China 6 standard was gradually implemented starting in 2019, with China 5 being the mainstream before that. If you want to confirm whether your car meets the China 6 standard, the most straightforward method is to check the environmental information on the vehicle certificate or the environmental label on the windshield. When I purchased the car, I paid special attention to this point because China 6-compliant vehicles have smoother registration and access in some major cities, reducing restrictions. However, the 2018 Edge, as a midsize SUV, offers good performance and reliability, making it suitable for daily use. If you're in a China 6 region and want to avoid future issues, I recommend contacting the local vehicle management office or a 4S store for verification. Overall, considering emission standards when buying a car is important, but the vehicle's practicality should also be well evaluated.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What Does Torque Mean?

Torque is a special type of moment that causes an object to rotate. The torque of an engine refers to the moment output from the crankshaft end. Under constant power conditions, it is inversely proportional to the engine speed—the faster the speed, the smaller the torque, and vice versa. Torque reflects a car's load capacity within a certain range. External torque is called turning moment or external couple moment, while internal torque is referred to as internal couple moment or simply torque. For family cars, greater torque means better acceleration; for off-road vehicles, greater torque allows for steeper climbing angles; for trucks, greater torque enables hauling heavier loads. Generally, the greater the torque, the better the car performs, and this holds true while driving as well. With the same displacement, a higher torque indicates a better engine.
17
5
Share

Which brand has a V-shaped logo?

V-shaped logo is Changan Automobile. Here are the relevant introductions: 1. The logo of Changan Automobile is inspired by the abstract image of sheep horns, interpreting Changan Automobile's position as the "bellwether" in China's automobile industry, and also indicating Changan Automobile's business philosophy of integrating multiple resources for development and innovation. 2. It is mainly engaged in the research and development of power system products and advanced technologies. Changan Automobile has formed a product spectrum of low, medium and high-end, wide series and multiple varieties, including micro cars, cars, buses, trucks, SUVs, MPVs, etc., with an engine platform ranging from 0.8L to 2.5L.
20
3
Share

Can Fog Lights Be Installed on Base Model Cars?

Fog lights can be installed on base model cars. Installing fog lights is not illegal, as there are currently no laws prohibiting their installation. However, modifications must not alter the vehicle's appearance, structure, framework, or performance; otherwise, the vehicle may fail inspection. Relevant information about fog lights is as follows: 1. Fog lights generally refer to automotive fog lights installed at the front and rear of the vehicle. They are used to illuminate the road and provide safety warnings during rainy or foggy conditions. 2. The purpose of fog lights is to make the vehicle visible to others in situations where visibility is significantly reduced due to fog or rain. Therefore, fog light sources need to have strong penetration. Most vehicles use halogen fog lights, while higher-end options include xenon fog lights.
8
2
Share

What is a Central Locking System Failure?

Common issues with automotive central locking systems involve malfunctioning locks that prevent doors from securing properly. Modern vehicles utilize various types of central locking systems, but their fundamental components typically include door lock switches, door lock actuators, and door lock control modules. When doors fail to lock due to central locking failure, the problem usually stems from faulty actuators or control modules. If such issues occur, owners should promptly visit a repair shop for diagnosis, as specialized diagnostic tools can quickly identify fault codes. Below are self-inspection methods: 1. First verify proper installation of components and wiring connections, then check whether power cables (positive leads) and ground wires maintain secure connections to the battery. If no abnormalities are found, this indicates potential failures in the electronic control switch box, damaged locking switches, or circuit malfunctions requiring detailed inspection of each component. 2. If only one or two door locks remain inoperative, the likely causes are either damaged door lock motors in those specific doors, wiring open circuits, or mechanical transmission failures in the affected assemblies.
9
3
Share

What are the differences between the Phideon and the Passat?

The differences between the Phideon and the Passat are as follows: 1. The first difference between the Phideon and the Passat is reflected in the price, with the Phideon being more expensive than the Passat. In terms of space, the Phideon offers slightly more room. 2. The Passat currently has 11 models available for sale, featuring 2 engine options: 1.4T and 2.0T, with 1 transmission choice: dual-clutch. The maximum engine power is 162kW, the maximum horsepower is 220PS, and the maximum torque is 350N·m. The Phideon has 7 models available for sale, featuring 2 engine options: 2.0T and 3.0T, with 1 transmission choice: dual-clutch. The maximum engine power is 220kW, the maximum horsepower is 299PS, and the maximum torque is 440N·m. 3. The Phideon's design focuses on being stylish, dynamic, simple, and elegant while maintaining high practicality. Horizontal lines enhance the visual sense of elongation, which becomes even more apparent when looking at individual sections. The horizontal lines and waistline details give the car a sculptural feel. The Passat integrates a dot-matrix horizontal grille with the front headlights on both sides, with flowing light-shadow dual waistlines extending from the headlights and merging with the rear spoiler lines. The embedded C-pillar side windows, combined with the streamlined roofline, create a side profile that resembles a flowing poem, showcasing rhythmic beauty. The multi-layered water-inspired rear design complements the front face, creating a visually rich experience.
1
0
Share

Can modified LED headlights pass the annual vehicle inspection?

Modifying to LED headlights is similar to modifying to xenon headlights. As long as the color temperature, brightness, and beam angle meet the requirements, it won't affect the annual inspection, provided your headlights don't scatter light and there are no factors that could compromise driving safety. Here are some details about modifying headlights: 1. First, regarding the annual inspection after modifying headlights, the vehicle annual inspection is a mandatory national safety check for drivers. For headlights, the inspection has requirements on color and brightness. The replaced bulbs cannot exceed 6500K; otherwise, the inspection equipment won't detect the light. Additionally, the replaced bulbs must be properly aligned in terms of height and direction, with a central focus point. The equipment measures the brightness at the center point, so scattered light will fail the inspection. 2. Second, there's the issue of installing LED bulbs. The distance between the bulb position and the rear cover varies for each vehicle. Current LED bulbs come with either fans or aluminum heat sinks. You must choose LED bulbs that fit your vehicle; otherwise, the rear cover won't seal properly, leading to water and dust ingress, which can quickly damage the bulbs and even affect the original wiring and assembly. 3. Third, when choosing brands for LED bulb modifications, opt for well-known brands because LED bulbs have high requirements for heat dissipation and LED chips. The market is flooded with brands of varying quality. Poor heat dissipation can cause rapid light degradation and burn out the LED chips quickly. Choosing reputable brands ensures quality and performance.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.