Does the 2017 Nissan Qashqai come with a sunroof?

Does the Dongfeng Renault Koleos have an ESP switch?

Dongfeng Renault Koleos does not have an ESP switch. ESP is the Electronic Stability Program, which analyzes the vehicle's driving state information from each sensor and then issues correction commands to ABS and ASR to help the vehicle maintain dynamic balance. ESP can keep the vehicle stable under various conditions, and its effect is more pronounced in cases of oversteering or understeering. The Dongfeng Renault Koleos is a regular car under the Dongfeng brand, featuring an adjustable rear seat backrest angle for increased space. In terms of body dimensions, the Renault Koleos measures 4450mm in length, 1840mm in width, and 1600mm in height. For body colors, the Renault Koleos offers options such as Starry Blue, Midnight Black, Flame Red, and Pearl White.

19

4

Share

What Causes Battery Cell Failure?

Battery cell failure is most likely due to poor battery quality, followed by incorrect usage methods, including prolonged deep discharge states and the use of high-power car chargers, which can all cause battery cell failure. Severe collisions or drops can also lead to broken connections inside the battery plates. Battery cell failure essentially means the connecting bridge between the internal plates has broken, causing the car battery to malfunction (insufficient voltage). Immediate action is required at this point, as it can significantly impact the entire vehicle. Repair method for battery cell failure: First, the problematic cell must be extracted, then a new plate is installed, sealed with adhesive, the terminals are welded, and electrolyte is added before charging.

10

5

Share

What to Do When the Car Air Conditioning Stops Cooling?

Solutions for when the car air conditioning stops cooling: 1. Check the coolant temperature: When the car ECU detects that the water temperature is too high, it disconnects the compressor control circuit, preventing the compressor from working, resulting in no cooling. 2. Check the engine speed: A normally functioning car, whether idling or accelerating, operates within a controllable range. If the engine speed is below 600 RPM or above 5500 RPM, the compressor will not work. 3. Check the air conditioning system pressure: The car air conditioning system has high and low pressure lines. There is a pressure switch in the high-pressure line. If the system pressure is too low or too high, the pressure switch disconnects to protect the compressor, preventing it from engaging, and the compressor stops working. 4. Check the evaporator temperature: The evaporator has a temperature sensor. When the sensor detects a temperature below 3 degrees Celsius, the car ECU will also disconnect the compressor relay, preventing the compressor from working.

3

2

Share

What is a position lamp?

Automotive position lamps refer to the front and rear position lights on a vehicle. Here is additional information: 1. Position lamps and clearance lamps are quite similar. The location of position lamps varies depending on the vehicle model. On passenger cars, position lamps are commonly referred to as parking lights. For larger vehicles, the lights on the front and rear sides are called clearance lamps. On trucks, position lamps are often called side marker lights. 2. Clearance lamps are the outermost lights at the front and rear of a vehicle. Large trucks also have clearance lamps on the roof and sides. The term "clearance lamp" can be interpreted literally: "clearance" indicates its warning function, while "lamp" refers to its role in outlining the vehicle's profile. Therefore, clearance lamps serve as warning lights to alert other vehicles. Installed along the edges of the vehicle's roof, these lamps indicate both the height and width of the vehicle. 3. The next setting after position lamps is low beam, while high beam refers to the main headlights.

14

2

Share

What is the normal coolant temperature for a car?

The normal temperature is indicated by the center of the needle--90℃. Here are specific details about coolant temperature: 1. Coolant is an essential part of a car's engine. It circulates within the engine cooling system, carrying away excess heat generated during engine operation, allowing the engine to run at its optimal working temperature. 2. Both excessively high and low temperatures can cause damage to the car. Lower temperatures indicate stronger heat dissipation. Excessively low temperatures mean greater heat loss through dissipation, and lower working temperatures result in higher fluid viscosity. Increased viscosity leads to greater resistance in moving parts, reducing output power. 3. Excessively low cylinder wall temperatures prevent proper formation and combustion of the air-fuel mixture, increasing fuel consumption. The engine becomes harder to start, operates with greater resistance, and fuel evaporation becomes difficult. Unvaporized fuel due to low temperatures can wash over cylinder surfaces, damaging the lubricating oil film and accelerating component wear.

2

4

Share

How to Use Turn Signals When Entering a Roundabout

There are three scenarios for using turn signals when entering a roundabout: turning left upon entering, going straight upon entering, and turning right after entering. The details are as follows: Turning left upon entering: If the vehicle intends to turn left, it should prioritize selecting the left lane inside the roundabout. Since the vehicle needs to merge from the outer lane to the inner lane, it should activate the left turn signal when entering the roundabout. Before exiting the roundabout, the driver should switch to the right turn signal in advance to give sufficient warning to vehicles behind. After ensuring safety, the vehicle should start changing lanes from the inner lane to the outer lane and finally exit the roundabout. Going straight upon entering: If the vehicle intends to go straight, it should prioritize selecting the middle lane inside the roundabout and merge into the middle lane without obstructing vehicles behind. Since no lane change is required after entering the roundabout, the left turn signal is unnecessary. When preparing to exit the roundabout to continue straight, the vehicle may need to cross the right lane inside the roundabout, potentially hindering vehicles behind. Therefore, the right turn signal should be activated to alert other vehicles before exiting the roundabout. Turning right after entering: If the vehicle intends to turn right to another intersection, it should quickly select the right lane inside the roundabout to exit or may choose to turn right from the outer lane. The situation when entering the roundabout is similar to going straight, so the left turn signal is also unnecessary. After selecting the corresponding intersection, the driver should activate the right turn signal in advance and exit the roundabout by turning right after ensuring safety. Typically, roundabouts are designed with four lanes: the left lane for left turns, the middle two lanes for going straight, and the right lane for turning right to exit the roundabout.

5

2

Share

Does the 2017 Nissan Qashqai come with a sunroof?

Does the Dongfeng Renault Koleos have an ESP switch?

What Causes Battery Cell Failure?

What to Do When the Car Air Conditioning Stops Cooling?

What is a position lamp?

What is the normal coolant temperature for a car?

How to Use Turn Signals When Entering a Roundabout

Can Dash Cams Record Clearly at Night?

How to reset the maintenance reminder on Volkswagen Polo?

Where is the Porsche Battery Located?

Where is the navigation system in the Bestune X40?