Does the 2012 Audi A4L have serious oil burning issues?

2 Answers
VonMartin
07/25/25 2:18am
This model has relatively severe oil burning issues. Below are the reasons for oil burning in the Audi A4L: 1. New car break-in: Many technical experts point out that improper operation during the break-in period is common among Audi A4L owners. Many drivers report oil burning occurring within the first 4,000 kilometers of driving. Therefore, dealerships offer the first maintenance service at 5,000 kilometers to mitigate later oil burning problems. 2. Stratified combustion: This issue is primarily related to the engine of the 2.0TSI model. The piston thickness is thinner than usual, leading to significant differences in high-temperature operation compared to conventional pistons. Gaps can form during operation, allowing oil to leak through and cause oil burning. Many drivers report higher oil consumption in 2.0TSI models, which is one of the reasons. 3. Dealer practices: Due to inherent design defects in the engine, fundamental solutions may be difficult. In such cases, it is recommended that drivers use higher-quality oil to alleviate excessive oil consumption.
Was this review help?
10
2
Share
DiJudah
08/10/25 4:31pm
I've been driving a 2012 Audi A4L for several years, and the oil consumption issue is indeed quite common. After reaching 80,000 kilometers, my car requires topping up oil once or twice between services, consuming approximately 0.5 liters per 1,000 kilometers. This is primarily due to the piston ring design flaw in the EA888 Gen 2 engine, which causes poor sealing and allows oil to seep into the combustion chamber. Severity varies among owners, but if you frequently drive at high speeds or make short trips with frequent cold starts, oil consumption becomes more noticeable. I recommend developing a habit of regularly checking the dipstick, using higher viscosity 5W-40 synthetic oil, and upgrading the oil separator during maintenance to mitigate the issue. Long-term neglect may lead to increased carbon buildup, reduced power output, and even catalytic converter damage. As an owner, I believe timely attention can significantly improve the car's longevity.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

Focus Headlight Model?

Ford Focus headlight assembly low beam model is H7, power 55W; high beam model is H1, power 55W. More information about car headlights is as follows: 1. Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of a car. They not only relate to the external image of a car owner but are also closely connected to safe driving at night or under bad weather conditions. 2. Car headlights are located at the front of the car, mainly serving for illumination and signaling purposes, and their daily use and maintenance should not be overlooked. The light emitted by car headlights can illuminate the road conditions in front of the vehicle body, enabling drivers to drive safely at night.
15
3
Share

How to set up one-touch window lift for Venucia T70?

To set up the one-touch window lift function for Venucia T70, take out the plastic pry tool from the small box with a red arrow lock in the car door slot, then connect to the main unit for setup. Below is some introduction about one-touch window lift: 1. The one-touch window lift function in cars refers to pressing the switch to automatically raise the window to the top, or lower it to the bottom. The window lifter can prevent forgetful car owners from having items stolen due to forgetting to close the windows. 2. The one-touch window lift function is achieved through a window lifter, which comes in three types, including time-controlled, program-controlled intelligent window closing systems.
6
2
Share

What does the Mercedes-Benz C gear mean?

Mercedes-Benz C gear is the switch button between Comfort C mode and Sport S mode, and pressing it will be displayed on the central console screen. The following are some introductions about C mode and S mode: 1. C mode: It starts in 2nd gear, and the car's transmission control module will shift to a higher gear at low RPM, with less shifting impact, providing better comfort and fuel efficiency. 2. S mode: It starts in 1st gear, and the transmission control module will automatically choose the maximum torque output RPM for shifting, which is around 4000 RPM, delivering greater torque and speed.
4
4
Share

Where is the MINI cabin air filter located?

MINI cabin air filter is located behind the glove box (storage compartment) on the passenger side. If you need to replace the MINI cabin air filter, here are the steps: 1. Properly remove the glove box: Locate the screws securing the glove box to the dashboard around its perimeter and unscrew them one by one. 2. Locate the cabin air filter: After removing the glove box, find the cabin air filter, which is generally positioned at the lower left side. Carefully remove it once located. 3. Replace the cabin air filter: After taking out the old filter, install the new cabin air filter. Note: Be sure to purchase genuine cabin air filters from authorized channels, as genuine filters will have manufacturing dates marked on them.
14
1
Share

Does the Jetta VS5 have front and rear anti-collision beams?

Jetta VS5 has front and rear anti-collision beams. The front anti-collision beam is located behind the foam layer of the front bumper, while the rear anti-collision beam does not have foam, which serves an energy-absorbing function. Here is some information about the front and rear anti-collision beams: 1. The anti-collision beam is not actually meant to 'prevent collisions'; its main function is to transmit force. 2. When the vehicle is hit from the front or rear, if the force is applied to the anti-collision beam, the beam can transfer the impact force to the parts where it connects to the vehicle body—usually the beam and the longitudinal beams (sometimes the rear body underframe in the case of the rear). Between the beam and the longitudinal beams, there is typically a small energy-absorbing box structure.
16
4
Share

What is the driving principle of the Accord Hybrid?

Accord Hybrid driving principle: The 2.0-liter gasoline engine drives the generator to produce electricity, which is then used for the electric motor. At this time, the vehicle is driven solely by the electric motor. Here are some introductions about the Accord Hybrid drive: 1. The Accord hybrid system has three driving modes: pure electric, hybrid, and internal combustion engine drive. 2. In electric mode, the motor obtains energy from the lithium battery pack and drives the vehicle alone, with a maximum speed of 60 mph. The maximum driving range is not high. Once the battery energy is exhausted, it automatically switches to hybrid mode.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.