Does the 14th-generation Sylphy have a manual version?

1 Answers
LaColin
07/30/25 10:02am
14th-generation Sylphy does not have a manual transmission. The 2014 Nissan Sylphy only has one CVT model with automatic transmission, which is the 2014 1.6L CVT XV Premium Edition. Regarding the dimensions of the all-new 14th-generation Sylphy, there is only a slight improvement. Its length is 4641mm, width is 1815mm, height is 1447mm, and wheelbase is 2712mm. Below is some relevant information about the 14th-generation Sylphy: 1. The all-new Sylphy is equipped with an upgraded third-generation HR16 engine, with slight improvements in power and torque. The maximum power is 139 horsepower, and the maximum torque is 169 N•m. 2. The transmission system is paired with a CVT gearbox. With the assistance of ECO mode and ISS intelligent start-stop system, the manufacturer claims that the fuel consumption can be as low as 4.9L/100km, and it meets the National VI emission standards.
Was this review help?
1
2
Share
More Forum Discussions

Is It Safe to Keep Perfume in the Car?

It is unsafe to keep car perfumes in the vehicle as they are flammable. When the temperature inside the car gets too high, the gas pressure inside the perfume bottle increases, which can easily rupture the bottle and cause an explosion. Below are the classifications of car perfumes and items that should not be placed in the car: Classifications of Car Perfumes: There are mainly two types of car perfumes: spray-type and volatile-type. Spray-type perfumes are relatively more dangerous, while volatile-type perfumes have a higher safety coefficient and usually do not pose safety hazards. Items That Should Not Be Placed in the Car: Not only perfumes but also lighters, carbonated drinks, air fresheners, and similar items should not be left in a car with excessively high temperatures.
11
4
Share

How to Push-Start a Motorcycle with a Dead Battery?

During the use of a motorcycle, it is inevitable to encounter situations where the battery is low or completely dead. The main function of a motorcycle battery is to serve as an auxiliary power source for the vehicle. Its usage involves a cycle of charging and discharging, primarily aiding in starting the vehicle and storing electrical current. The primary power source on a motorcycle is its generator, which produces working current through the rapid rotation of the engine. This current is then used to charge the motorcycle's battery via a rectifier voltage regulator. Subsequently, the battery stores the current generated by the engine for use in special circumstances. In cases where the battery is severely depleted, the engine can still be started normally. When the battery voltage is insufficient to start an EFI (Electronic Fuel Injection) motorcycle, shift the gear lever into third gear, lift the main stand, and manually rotate the rear wheel with force. If the motorcycle can start electrically when there is power, this method will be effective—simply rotate the wheel in the forward direction.
9
1
Share

What are the differences between the F7 and F7X?

The differences between the Haval F7X and F7 are as follows: Different height: The height of the Haval F7X is 1660mm; the height of the F7 is 1690mm. Different configurations: The Haval F7X is equipped with a tire pressure monitoring function; the F7 does not have a tire pressure monitoring function. Here are some similarities: Type: Both the Haval F7X and F7 are manufactured by Great Wall Motors, classified as compact SUVs, with a turbocharged intake form. Both the Haval F7X and F7 feature front-wheel drive, a front suspension type of MacPherson independent suspension, a rear suspension type of double-wishbone independent suspension, electric power steering, and a unibody structure. Power: The F7 has a traditional SUV shape, while the F7X is a coupe SUV with a more sporty rear design. In terms of powertrain, both use the same 1.5T and 2.0T engines. The 1.5T engine can deliver a maximum of 169 horsepower and 285 Nm of torque, while the 2.0T engine can output a maximum of 225 horsepower and 385 Nm of torque. Both models use a 7-speed dual-clutch transmission, offering excellent smoothness.
3
0
Share

How to Drive the Outlander During the Break-in Period?

During the break-in period of the Outlander, it is important to avoid sudden acceleration, pay attention to shifting speed, keep the vehicle speed below 80, and also monitor the engine RPM. Below is some information about the car break-in period: The process where new transmission components undergo a period of operation and friction, resulting in a perfect fit and smooth surface between the mating and meshing surfaces, is called the break-in period. Additional Information: Exterior: The Outlander's front end appears very robust, with an inverted triangular bulge on the engine hood extending down to above the bumper. The front air intake is divided into two parts, and the lower body features a slightly protruding design, giving it a full and rounded appearance. Interior: The steering wheel is designed in the currently popular four-spoke style and is adjustable up and down. However, for drivers around 1.7 meters tall, this design can easily block the turn signals on the dashboard. The circular air vents and T-shaped instrument panel echo the Outlander's "unique" design concept.
2
1
Share

What to Do If You Lose Your Car Keys?

If you lose your car keys, you can choose to use a spare key or call a locksmith. Using a spare key is the simplest and most effective method, as every car comes with a spare key provided by the manufacturer upon purchase. Here is some relevant information about car keys: Types of Car Keys: Common car keys are generally divided into three types: the oldest purely mechanical keys, remote control + mechanical keys, and chip keys. Documents Required for Key Replacement: When getting a new key, you need to bring your driver's license, vehicle registration certificate, and the motor vehicle registration certificate. For different grades of vehicles, the price will naturally vary, and the difference can be significant.
7
0
Share

When is the best time to add fuel additive?

Fuel additive is best added after exceeding 20,000 kilometers. The functions and usage methods of fuel additive are as follows: Functions of fuel additive: Fuel additive has significant cleaning effects on the fuel intake system of a car, especially for carbon deposits in the fuel injectors and intake valves, without causing adverse effects on the engine. The only drawback is that it cannot clean the throttle body. During driving, fuel additive can gradually clean the deposits in the fuel intake system, significantly improving fuel atomization, making combustion more complete, and increasing thermal efficiency, thereby achieving certain fuel-saving effects. Usage method of fuel additive: Using fuel additive is quite convenient. Before refueling at a gas station, add the fuel additive to the car's fuel tank according to the recommended ratio, then proceed with refueling. This way, the added fuel additive will quickly dissolve fully under the impact and vortex stirring of the fuel, ensuring a more uniform mixture of fuel additive and fuel.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.