Does the 12123 Automatically File the Record After Passing Subject 4?

2 Answers
McCorbin
07/25/25 5:10am
After passing Subject 4, the 12123 system will automatically file your driver's license information. However, even if the 12123 platform shows that your driver's license has been filed, you cannot drive on the road until you physically receive your driver's license. According to China's "Road Traffic Safety Law," drivers must carry their driver's license while driving. Failure to do so may result in a fine of 50 RMB and a deduction of 1 point, and the vehicle may even be impounded. Below is some information about the driver's license: 1. Definition of a Motor Vehicle Driver's License: A legal document issued by the authorities to individuals who have legally learned to drive, mastered traffic regulations and driving skills, and passed the required tests, permitting them to drive specific types of motor vehicles. 2. Subjects of the Motor Vehicle Driver's License Test: These include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
Was this review help?
8
3
Share
Jeanette
08/10/25 5:39pm
I just passed the subject four exam and want to share my experience. The system does automatically file your driver's license information on the 12123 platform, because I logged into the APP less than an hour after the exam and saw the license status updated. The whole process was quite smooth. The traffic management bureau will automatically upload your test results, so you don't need to fill out forms manually or anything. But don't rely on it completely. I recommend you download the 12123 APP on the same day after the exam to check your status. If it doesn't show up, wait half a day or consult your driving school, as there might be a system delay. Passing subject four is the final step to getting your driver's license. The sooner you get it done, the sooner you can drive with peace of mind. Remember to update the APP regularly.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

How to Adjust Car Lights?

Methods for adjusting car lights: First, find a wall with dim surrounding light, then drive the car to a position about 10 meters away from the wall, ensuring the car is perpendicular to the wall and the ground is level. At the center of the front of the vehicle, place a piece of tape 10 cm below the headlight height on the wall. Measure the distance from the low-beam bulb to the center of the car emblem, and adjust the headlights until the beam is projected straight forward. Note that the core of the headlight is the bulb, and its performance will affect nighttime illumination, directly impacting driving safety. Therefore, high-quality headlight bulbs should be used to fully ensure safety. Low-quality bulbs have a short lifespan and cannot guarantee stable performance.
12
4
Share

What are the hidden functions of the Bluebird car key?

Bluebird car key hidden functions include: vehicle locator function, automatic speed locking function, one-touch power window lift for the driver's seat, and automatic door unlock when the engine is turned off. The Bluebird is a compact car with dimensions of 4683mm in length, 1780mm in width, and 1465mm in height, with a wheelbase of 2700mm. The Bluebird is equipped with a 1.6L naturally aspirated engine codenamed HR16, delivering a maximum power of 93kW and a maximum torque of 168Nm. This engine is paired with either a 5-speed manual transmission or a CVT transmission. The front suspension of the Bluebird uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
15
4
Share

What type of engine oil is suitable for the Kia K5?

The Kia K5 can use 5W30 engine oil, either fully synthetic, SM or SN grade, with an oil capacity of approximately 4 liters. In terms of appearance, the Kia K5 maintains the family's design style, with some changes to the front headlight design, which is now connected to the grille for a more cohesive look. The front face has become more aggressive. On the side profile, the new car features a very smooth body line with a fastback design, complemented by chrome trim on the side, enhancing its presence. The dimensions of the Dongfeng Yueda Kia K5 are 4980 mm in length, 1865 mm in width, and 1445 mm in height.
18
5
Share

What is the button with an 'A' in a circle?

a in a circle is the auto start-stop function switch button. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (such as at a red light) during driving. When it's time to move forward again, the system automatically restarts the engine. This system works by equipping a traditional engine with an enhanced motor that has idle start-stop functionality, allowing the engine to completely shut off when idle stop conditions are met. When the vehicle needs to start moving again, the idle start-stop motor system quickly responds to the driver's start command, rapidly restarting the engine for seamless operation, thereby significantly reducing fuel consumption and exhaust emissions.
1
0
Share

What is the function of the crank connecting rod mechanism?

The functions of the crank connecting rod mechanism are: 1. Convert gas pressure into crankshaft torque; 2. Transform the reciprocating motion of the piston into the rotational motion of the crankshaft; 3. Convert the force exerted by combustion on the piston crown into crankshaft torque to output mechanical energy to working machinery. The crank connecting rod mechanism is the main moving mechanism of an engine, composed of components such as the piston group, connecting rod group, crankshaft, and flywheel group. The role of the piston is to form the combustion chamber together with the cylinder head and cylinder wall, withstand the gas pressure in the cylinder, and transmit the force to the connecting rod through the piston pin to drive the crankshaft to rotate. The function of the connecting rod is to transmit the force borne by the piston to the crankshaft and convert the reciprocating motion of the piston into the rotational motion of the crankshaft.
6
1
Share

How to identify the manufacturing year of a tire?

Method to identify the manufacturing year of a tire: The production date of a tire is indicated by a four-digit number, which is printed on the sidewall of the tire. For example, 1019 represents that the tire was manufactured in the 10th week of 2019. Every tire has a production date. If a car owner encounters a tire without a production date when purchasing a new one, it is advisable not to buy it. It is recommended that car owners replace their tires every four years, even if the mileage driven within those four years is relatively low. Tires are rubber products and will age over time. During regular use, it is necessary to frequently check tire pressure and inspect the tire surface for any damages. The sidewall of a tire is relatively fragile; if it gets scratched or punctured, it cannot be repaired.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.