···
Log in / Register

Does the 10-day waiting period for Subject 2 start counting on the same day?

3 Answers
Avery
07/29/25 3:52am
For candidates who fail the exam, the waiting period begins on the day following the exam date, and they can only start rebooking the exam from the 11th day onwards. Below is a detailed introduction to Subject 2: 1. Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small vehicles C1 and C2, the test items include five mandatory components: reversing into a parking space (reverse parking), parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves). Some regions may also include a sixth item: collecting a toll card on a highway. 2. Teaching objectives: Master the basic driving operation essentials and possess the fundamental ability to control the vehicle; proficiently grasp the basic methods of field and road driving within the test area, have the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and accurately control the vehicle's driving position, speed, and route.
Was this review help?
6
2
Share
DelAnnie
08/12/25 3:15pm
Back when I just passed the subject two test at the driving school, I also wondered about this 10-day waiting period. Later, I asked the instructor and found out that the so-called 10-day retake period starts the day after you fail the test. That means the next day counts as the first day, totaling 10 calendar days, not including the test day itself. It's not about deliberately delaying time but mainly to let you reflect on your mistakes and practice those error-prone maneuvers more, like reversing into a parking space or parallel parking. I suggest not rushing to book the test. Instead, use a mobile app to simulate it a few times or go to the driving school's practice area to get more familiar with the test procedures—this approach is steadier. Time does fly, but focused preparation will increase your chances of passing next time. Oh, and don’t drink too much water before the test; otherwise, nervousness can lead to more mistakes—I learned that the hard way. Anyway, waiting 10 days isn’t a bad thing. Staying calm is what matters most.
Was this review help?
15
0
Share
Expand All
GavinDella
10/02/25 7:48am
From the perspective of a coach who frequently accompanies students for exams, I must say the 10-day retake interval rule for Subject 2 is very clear: the day of the exam is not counted, and the first day starts the day after you fail the exam. After 10 full calendar days, you can schedule a retake. This arrangement ensures students have ample time to learn from their mistakes, such as focusing on specific areas like parallel parking or hill starts. Don’t count the days yourself—it’s best to check the driving school system or confirm the retake schedule with your coach. Additionally, during this period, I often recommend practicing more on the actual test site to familiarize yourself with the exam environment, rather than just playing simulation games on apps. Remember, safe driving comes first—rushing to retake the exam can lead to mistakes, so patience benefits everyone.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

Where is the generator located?

Generator is usually located in front of the engine. You can see it by looking down after opening the engine hood. The generator is a very important component in a car, as it generates electricity to power all the electrical equipment in the vehicle. When the engine is not started, the battery supplies power to all electronic devices and is also responsible for starting the engine. A car cannot operate without electricity. The ignition system, fuel supply system, and ECU of the car engine all require electricity to function. If power is cut off while driving, the engine will stall, causing the car to break down. If the generator fails during driving, the car will use the electricity stored in the battery.
18
3
Share

What are the body dimensions of the Audi A3?

Audi A3 body dimensions: length 4312mm, width 1785mm, height 1426mm, with a wheelbase of 2629mm. The Audi A3 is a sedan product produced by Audi, developed based on the Volkswagen MQB platform. The body features lightweight design and aluminum materials, and is powered by multiple engines including 1.4TFSI and 1.8TFSI. The front suspension of the Audi A3 uses MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The lines of the Audi A3's tailgate are more rounded and simple, showcasing a balance between aerodynamics and styling aesthetics, while also providing better headroom.
19
2
Share

Where is the air conditioning filter located in the Buick GL8?

Buick GL8's air conditioning filter is located inside the glove compartment on the passenger side. You need to remove the lower dashboard panel on the passenger side, which is usually secured with plastic clips. You will then see a rectangular fuse box. After removing the fuse box, you can find the filter near the driver's side. The car's air conditioning filter helps separate solid impurities such as dust, pollen, and grinding particles from the air. The Buick GL8 is an MPV model with dimensions of 5256 mm in length, 1878 mm in width, and 1776 mm in height, with a wheelbase of 3088 mm. The Buick GL8 is equipped with a 2.0T SIDI direct-injection turbocharged engine across the entire lineup, delivering a maximum horsepower of 191 hp and a top speed of 205 km/h, all models comply with the China VI emission standard.
12
4
Share

What are the automotive electronic control systems?

Automotive electronic control systems consist of three parts: sensors, electronic control units, and actuators. Depending on their control functions, automotive electronic control systems can be divided into seven types: power performance, economy and emissions, safety, comfort, handling, off-road capability, and information control systems. During operation, various sensors continuously detect the vehicle's operating conditions and transmit this information in real-time to the ECU through input interfaces. Upon receiving this information, the ECU processes it according to pre-programmed control procedures, makes corresponding decisions, and outputs control signals to the respective actuators through its output interface. The actuators, upon receiving the control signals, perform the corresponding actions to achieve a predetermined function.
11
2
Share

What Causes a Tire Blowout?

Causes of tire blowouts: 1. Speeding and prolonged driving, leading to excessive tire temperature; 2. Abnormal tire pressure; 3. Excessive wear, aging, or cracking of the tire; 4. High temperatures are related to air pressure. When the temperature rises to a certain level, it can cause the tire body to become too thin and lead to a blowout. When a car is driven under high-temperature conditions, the tire is prone to deformation due to thermal expansion and contraction, reducing its tensile strength. Additionally, the heat generated from continuous friction between the tire and the ground during driving, coupled with relatively slow heat dissipation, causes the air pressure to increase, leading to a blowout due to the tire body becoming too thin. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling.
8
1
Share

What is the function of the in-car PM2.5 filter?

The function of the in-car PM2.5 filter is to filter PM2.5 particles from the air. Air pollution is becoming increasingly severe, especially particles with a diameter of 2.5 micrometers or smaller in the air, which can be absorbed into the human body and pose a threat to health, particularly for sensitive individuals. To meet market demands, various car manufacturers have successively produced vehicles equipped with PM2.5 filters. In-car PM2.5 filters are divided into two types: built-in and external. The built-in type is integrated into the car's air conditioning system, while the external type is integrated into the central console of the front seats. PM2.5 refers to particles in the atmosphere with a diameter of 2.5 micrometers or smaller, also known as respirable particles. Their diameter is less than one-twentieth the thickness of a human hair.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.