···
Log in / Register

Does Taking the Wrong Route in Subject 2 Count as a Failure?

3 Answers
DiAngelo
08/27/25 2:20am
Taking the wrong route in Subject 2 counts as a failure. Below is an introduction related to the Subject 2 driving test: 1. Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. 2. Content: The test items for small cars C1 and C2 include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curved road. The test items for large vehicles A1, A2, A3, B1, and B2 include: stake test, stopping and starting on a slope, parallel parking, passing a single-plank bridge, driving on a curved road, turning at a right angle, passing a width-limited gate, passing continuous obstacles, driving on undulating roads, making a U-turn on a narrow road, as well as simulated highway driving, continuous sharp turns on mountainous roads, tunnels, rainy and foggy weather, slippery roads, and emergency handling. 3. Development: Starting from June 1, 2021, the "stopping and starting on a slope" item will be removed from the Subject 2 test for small automatic transmission vehicle driver's licenses.
Was this review help?
3
2
Share
MicahRose
09/08/25 9:05am
When I took the driving test (Subject 2) two years ago, I failed immediately due to nervousness and taking a wrong turn. I was supposed to make a right turn toward the hill start section, but somehow I turned left into the curve driving zone instead. The examiner stopped me on the spot and declared the test over, explaining that the test route has strict requirements—each section must be completed in order from start to finish. Taking a wrong turn causes you to skip or misplace subsequent sections, making it impossible for the system to score properly. That experience taught me that Subject 2 isn’t just about driving skills—you also need to memorize the layout. I recommend practicing simulated routes or watching videos to rehearse beforehand, rather than relying solely on memorizing reference points. Mental composure is also crucial—take deep breaths, steady your hands on the wheel, and don’t panic like I did. Remember, following the correct route is the bare minimum to pass—one wrong turn and the test is over.
Was this review help?
10
0
Share
Expand All
DiDante
10/23/25 2:25am
As a driving instructor with years of examination experience, I've seen too many students fail due to taking wrong routes, which is truly regrettable. Examination rules require each test item to start and end at fixed positions. For example, reverse parking must begin at the standard entrance marker. If you drive the wrong way, the examiner will immediately judge it as failure to complete the test content, resulting in disqualification. This isn't just about wrong positioning—it also affects the connection to subsequent items like parallel parking, compromising safety assessment. In daily teaching, I emphasize the importance of familiarizing yourself with the test route map in advance, even sketching the turning points with pen and paper. During the test, drive slowly and stay focused ahead to avoid distractions; wrong routes often occur when nervous beginners overlook arrow directions. Remember, one wrong move means immediate failure—no chance for correction. Practicing skills while mastering route awareness can significantly reduce risks.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

Can the Headlight Vent Be Blocked?

No, it cannot be blocked. The headlight vent is a properly designed component that maintains the air pressure balance inside and outside the headlight, preventing damage caused by excessive internal pressure. It also helps extend the headlight's lifespan. The function of the headlight vent: In terms of the overall structure of the headlight, whether it's a standard halogen headlight, a xenon headlight, or an LED headlight, there is a venting rubber tube located at the rear cover. When the headlight is turned on or during use, it generates a significant amount of heat. The vent tube helps dissipate this heat as much as possible to maintain the headlight's normal operating temperature and ensure stable performance. Disadvantages of the vent: Moisture in the air can enter the headlight through the vent and condense on the lens. As moisture accumulates, water droplets may form and flow down the lens.
15
0
Share

What cleaning agent should be used for DIY car washing?

Car washing should use specialized automotive cleaning agents. There are brands like Turtle Wax and Red Power available on the market. When purchasing, ensure the cleaning agent is pH-neutral. Neutral cleaning agents protect the car paint from damage during washing, are gentle on the skin, and often contain wax components that help preserve the paint surface. Remember, never use laundry detergent as a substitute for car cleaning agents, as laundry detergents are alkaline and can corrode the car paint. More details are as follows: Do not randomly clean the engine compartment: Because the engine compartment is filled with components like circuit boards, carelessness can easily damage high-voltage packs and circuit boards. Therefore, be extra cautious when washing the car yourself, especially avoiding the use of high-pressure water jets. Cleaning frequency: There's no need to wash the car too frequently; once a week is recommended. For general dust, gently sweeping with a feather duster or a soft-bristled broom is sufficient. However, if the car encounters heavy rain, mud, or severe dust, it should be cleaned promptly.
15
0
Share

What are the detailed tire dimensions of Dahon P8?

The international standard specification for the Big Apple tires on Dahon P8 is 50-406, so the tire circumference is: (406 + 50 x 2) x 3.14159265 = 1590 mm (rounded). Here is some information about the tires: Composition: Tires are usually composed of three parts: the outer tire, inner tube, and flap. The inner layer of the tire body has a rubber layer with good airtightness and requires special rims. The structure of tires worldwide is evolving toward tubeless, radial, flat (with a small ratio of tire section height to width), and lightweight designs. Outer Tire: The outer tire consists of the carcass, buffer layer (or belt layer), tread, sidewall, and bead. The cross-section of the outer tire can be divided into several distinct areas: the crown area, shoulder area (tread slope), flex area (sidewall area), reinforcement area, and bead area.
11
0
Share

Is it okay not to install windshield film?

Not installing film has little impact on vehicle usage and driving. However, if conditions permit, it is recommended to install film. There are many benefits to applying film: after installation on the front windshield, it can reduce the aging time of car interior components caused by harmful sunlight rays and also minimize the damage of harmful rays to the human body. Impact of film installation on vehicle registration: Whether a new car with installed film can be registered mainly depends on whether the installed solar film meets the specified standards. Currently, the vehicle management department primarily refers to the GB7258-2004 "Safety Technical Conditions for Motor Vehicles Operating on Roads" enacted and implemented in 2004. Vehicle management office requirements for film installation: The driver's compartment must ensure the driver's forward and side vision. The visible light transmittance of the front windshield and the glass areas outside the windshield used for the driver's viewing area must not be less than 70%. Mirror-reflective sunshade films are not allowed on any window glass.
16
4
Share

What is the difference between BMW X3 and Brilliance BMW X3?

Brilliance BMW and imported BMW differ in the automotive quality standards of the countries where they are sold, so there will be variations in the entire vehicle. Brilliance BMW: Brilliance BMW Automotive Co., Ltd. is a joint venture established by BMW Group and Brilliance China Automotive Holdings Limited, engaged in the manufacturing, sales, and after-sales service of BMW brand vehicles. In May 2003, Brilliance BMW Automotive Co., Ltd. was officially registered, with its headquarters and production plant located in Shenyang, the capital city of Liaoning Province. BMW: BMW, short for Bayerische Motoren Werke AG (BMW), refers to automobiles produced by the BMW Group. The main series models include the 1, 2, 3, 4, 5, 6, 7, and 8 series. BMW is renowned worldwide for producing luxury cars, motorcycles, and high-performance engines.
14
0
Share

Which department should I register for a physical examination certificate when renewing my driver's license?

No need to make an appointment with any department. The physical examination for the driver's license is available at the registration office of the vehicle management office. The examination items are simple and can be completed quickly. Procedures for renewing the driver's license: Bring your ID card, original driver's license, and one copy to the local traffic department to apply for renewal. Process for renewing the driver's license: Fill out the motor vehicle driver's license application form, take an on-site photo, undergo a physical examination to obtain a motor vehicle driver's physical condition certificate, return to the original processing window for final signing, and the staff will require you to sign the motor vehicle driver's license application form to confirm. The renewal process is then completed. Renewal period: Generally, the new license is valid for 6 years. If there is no full-point record within the first 6 years of validity, the next renewal period will be 10 years.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.