···
Log in / Register

Does Subject 3 Include a Theory Test?

4 Answers
VonIsabelle
07/30/25 1:53am

Subject 3 does not include a theory test but focuses on practical assessments. Below are detailed explanations regarding the Subject 3 examination: Examination Regulations: The specific components of Subject 3 are road driving skills and safety & civilized driving knowledge tests. Each section is scored out of 100, with a passing score of 90 required for both. Training Hour Requirements: Subject 3 comprises a total of 40 training hours: 16 hours for theory, 4 hours for simulated driving, and 20 hours for practical driving. According to the teaching syllabus, driving training hours are recorded cumulatively, with each student allowed a maximum of 4 hours per day.

Was this review help?
15
2
Share
Freddy
08/15/25 7:45am

I just finished the third driving test and found out there's no theory exam at all! I remember my friend asked me if there was a written test, and I said the third test was purely about driving. The examiner had me demonstrate starting, turning, and parking on the road—it felt like a real driving simulation. The theory part was already covered in the first test, and the fourth test is about safety knowledge theory, so the third test focuses on practice to ensure you can drive. My advice is to practice more and stay calm during the road test.

Was this review help?
17
0
Share
Expand All
NaomiMarie
10/21/25 2:57am

As a coach who frequently trains students, I can confidently say that Subject 3 does not involve any theoretical exams. It tests practical driving skills, such as changing lanes on the road, responding to traffic lights, or simulating night driving. The examiner only observes your operations. Theory is covered in Subjects 1 and 4, which include knowledge of rules. For Subject 3, the focus is entirely on practicing driving. Don’t be misled into thinking there’s a written test—preparing for the practical aspect is key. Developing safe habits helps reduce accidents.

Was this review help?
16
0
Share
Expand All
DelJustin
12/04/25 3:25am

I've been driving for decades. When I took the driving test, the third subject was all about driving skills, with no theoretical written exam. Back then, we spent time on the road practicing starts and stops, leaving the theory for subjects one and four. It turns out that driving ability is far more important than rote memorization from books. Making mistakes during the road test is common, but with enough practice, you can pass.

Was this review help?
18
0
Share
Expand All
More Forum Discussions

What are the maintenance items for a car with 100,000 kilometers?

The major maintenance items for a car with 100,000 kilometers are as follows: 1. Use engine oil of the appropriate grade and replace the oil and filter regularly (every 5,000 kilometers). Frequently maintain the air filter and replace it regularly (every 20,000 kilometers). Regularly clean the fuel system and replace the fuel filter (every 30,000 kilometers). Regularly maintain the radiator mesh (every 30,000 kilometers). Replace the spark plugs regularly (every 40,000 kilometers or based on driving conditions). 2. The most important maintenance tasks are changing the engine oil and oil filter. The most frequent maintenance task is car washing. The parts that need to be checked most often are the tire surface and pressure, oil level, coolant level, and brake fluid level. Major maintenance requires replacing all vehicle fluids, the engine accessory belt, spark plugs, cleaning the throttle and fuel injectors, cleaning the three-way catalytic converter and intake manifold, and replacing the fuel filter.
13
1
Share

What is the 0-100 km/h acceleration time of the WEY VV7?

According to official data, the WEY VV7 has one model with a 2.0T engine, achieving a 0-100 km/h acceleration time of 8.5 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is applied to propel the vehicle, resulting in naturally faster acceleration. The Range Rover Evoque has a maximum torque of 320 Nm and a 0-100 km/h acceleration time of 9.6 seconds. The WEY VV7 has a torque of 387 Nm and a 0-100 km/h acceleration time of 8.5 seconds. Transmission efficiency: The transmission is the medium for transferring power and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The WEY VV7 is equipped with a wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Range Rover Evoque has a power-to-weight ratio of 100 Hp/T and a 0-100 km/h acceleration time of 9.6 seconds. The WEY VV7 has a power-to-weight ratio of 114 Hp/T and a 0-100 km/h acceleration time of 8.5 seconds.
15
0
Share

What Causes Insufficient Power When the Car Air Conditioner is On?

Reasons for insufficient power when the air conditioner is on are as follows: 1. Running the air conditioner increases engine wear. 2. Engine carbon buildup. 3. Faulty spark plugs. 4. Low-quality fuel. Solutions are as follows: 1. Inspect the car for any faults. 2. Replace the spark plugs. Spark plugs play a significant role, and different materials can yield varying results. High-quality spark plugs not only extend their lifespan but also enhance power output. Another method is to increase the voltage of the high-voltage coil or replace standard high-voltage ignition wires with high-energy ones. 3. Regularly check the engine oil level, as insufficient oil can lead to wear on car components. 4. Remove carbon deposits from the engine. Using poor-quality gasoline can cause carbon buildup, so frequent inspection and cleaning are essential to prevent carbon deposits through proper maintenance.
19
5
Share

What are the hidden functions of the Geely Binyue key?

The hidden function of the Geely Binyue key is the remote window-raising setting function. By pressing the lock button on the remote control, the windows will automatically rise. Below is relevant information: 1. The Geely Binyue is actually a high-quality, cost-effective L2-level intelligent driving model, which is quite rare among its peers. Despite limited costs, the system is not cumbersome and is very user-friendly. The Binyue is the first mass-produced sedan under the BMA global modular architecture, equipped with L2-level autonomous driving capabilities. 2. It includes ACC adaptive cruise control and lane departure assistance, collectively known as the ICC intelligent navigation system, which enables full-speed cruise control from 0-150km/h, whether on highways or in congested urban areas. It also features a city pre-collision system (AEB-P). When the system detects pedestrians or vehicles ahead, it issues a collision warning. If no action is taken, the system will automatically intervene and apply the brakes.
11
2
Share

What Causes Shaking During Rapid Acceleration?

Vehicle acceleration shaking can be attributed to the following reasons: 1. The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon deposit inside the engine, the gasoline sprayed by the cold-start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. 2. After starting, the gasoline adsorbed on the carbon deposits will be sucked into the combustion chamber by the engine's vacuum, enriching the air-fuel mixture. This leads to fluctuations between lean and rich air-fuel mixtures, causing idle shaking after a cold start. 3. The lower the temperature, the more fuel is required for a cold start, and the presence of carbon deposits will significantly affect the success of the cold start. Cleaning the fuel system can help resolve this issue.
5
1
Share

Why does the oxygen sensor fault code keep reappearing after being cleared?

The reasons why the oxygen sensor fault code keeps reappearing after being cleared are as follows: If the fuel from the gas station is substandard, containing excessive lead and silicon compounds, it can cause poisoning and damage to the oxygen sensor and even the catalytic converter. When the oxygen sensor first shows a fault code, it is only surface poisoning and still relatively mild. If high-quality fuel is used at this point, the toxic substances on the surface can be eliminated, restoring the oxygen sensor to normal operation. Extension: The function of the oxygen sensor is to detect the oxygen content in the exhaust. If there is too much oxygen, it indicates that the air intake is excessive while the fuel injection is insufficient, leaving unused oxygen, which prompts the system to increase fuel injection. If the oxygen content is too low, it means the fuel injection is excessive, and there isn't enough oxygen, leading the system to reduce fuel injection. Therefore, the oxygen sensor is a crucial component for fuel trim, constantly fine-tuning the air-fuel ratio to the optimal state.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.