Does Speeding Over Speed Bumps Damage the Car?

2 Answers
VivienneDella
07/28/25 11:38pm
Speeding over speed bumps can cause significant damage to the car. The hazards of driving quickly over speed bumps include: 1. Tire deformation and damage: Tires are the only part of the car that comes into direct contact with the ground, and any changes in the road surface first affect them. As a vulnerable component, the driving conditions directly impact the lifespan of the tires. Frequently speeding over speed bumps can damage the tire surface and even cause the wheel rim to deform due to compression. 2. Impact on the suspension: When a vehicle passes over a speed bump at high speed, the suspension system is subjected to impact forces several times or even more than ten times greater than during normal driving, severely affecting the lifespan of components such as shock absorbers, springs, and brackets. The strong impact can also damage the chassis, posing a threat to critical components located underneath the car, such as brake lines, fuel tanks, oil pipes, exhaust systems, and the engine oil pan. This threat directly relates to the vehicle's driving safety. 3. Impact on comfort: When a car speeds over a speed bump, the immediate reaction of passengers inside is discomfort due to the jolting. For vehicles with stiffer suspensions, rear-seat passengers may even bounce up suddenly, potentially hitting their heads against the roof and causing injury. Additionally, this action can stir up dust settled inside the car, polluting the air and affecting the health of the occupants.
Was this review help?
7
2
Share
DeAutumn
08/12/25 3:58am
I remember when I used to drive to work in a hurry, I often accelerated over speed bumps, which led to various car issues like loud noises from the suspension system and faster tire wear. The mechanic told me this practice is quite damaging to the car because speed bumps are designed to slow you down. Going too fast increases the impact force, potentially damaging shock absorbers, springs, and even the car frame structure, with repair costs easily reaching thousands. It's also dangerous—high speed over bumps causes severe jolts, making the car harder to control and increasing accident risks. Now, I’ve developed the habit of slowing down to 20-30 km/h before crossing speed bumps, ensuring a smooth pass. This not only protects the car and extends its lifespan but also saves on repair costs. Regular checks on tires and suspension can help prevent problems.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

What is the reason why the Chevrolet Sail does not move when shifting gears?

There are several reasons why the Chevrolet Sail does not move when shifting gears: 1. The transmission oil level is too low, or the internal oil pressure is too low. 2. The gear switch signal is incorrect. 3. There is a problem with the shift solenoid valve circuit or the solenoid valve itself. 4. There is an issue with the internal transmission actuator. The methods to address the Chevrolet Sail transmission failure are as follows: (1) Check the damage to the internal clutch, actuator, shift fork, and solenoid valve. (2) Repair or replace the clutch, actuator, shift fork, and solenoid valve to completely resolve the Chevrolet Sail transmission failure issue.
5
0
Share

How Often Should the Spark Plugs Be Replaced for the 9th Generation Honda Accord?

9th Generation Accord spark plugs should be replaced every 40,000 kilometers. Steps for replacing spark plugs on the 9th Generation Accord: 1. Remove the spark plug caps when the engine is cold. 2. Unscrew the old spark plugs counterclockwise. 3. Screw in the new spark plugs clockwise. Apply a small amount of engine oil to the threads for smoother installation. Hand-tighten first, then use a wrench to slightly tighten once the threads engage. 4. Reattach the spark plug caps. Note: Do not remove all ignition wires at once; replace one at a time to avoid misconnecting them. 5. After all spark plugs are replaced, verify everything is correct, start the engine, and if it runs normally, the car is ready to drive. Additional Information: Reasons for replacing spark plugs: As the engine runs or the vehicle mileage increases, the required discharge voltage for the spark plug electrode gap continuously rises, approaching the voltage limit provided by the ignition coil. This makes ignition increasingly difficult and eventually leads to misfiring.
11
5
Share

How to Deal with the Skoda Octavia Sunroof Noise?

The causes and solutions for the Skoda Octavia sunroof noise are as follows: 1. Insufficient lubrication of the sunroof slide rails: The noise may be due to poor lubrication in certain areas, and applying some grease can be tried. 2. Dust accumulation in the sunroof tracks: Keeping the sunroof open for a long time can lead to dust buildup on the slide rails, and cleaning them should eliminate the noise. 3. Loose screws in the sunroof: Long-term use may cause some parts or screws to loosen, and tightening them should stop the noise. 4. Aging of the rubber seal: The sunroof rubber seal, exposed to rain or sun for extended periods, can age and produce noise when operating the sunroof. Rubber conditioner can temporarily restore the seal's performance. Opening the sunroof fully and spraying rubber conditioner on the seal should make the noise disappear.
14
5
Share

How to Replace the Battery in a Buick Excelle Remote Key?

Buick Excelle remote key battery replacement steps are as follows: 1. First, turn the Buick Excelle remote key sideways to locate the seam of the remote. 2. Pry open along the seam of the remote key casing, remove the cover, and you will see the battery of the Buick Excelle remote key; take it out. 3. Prepare a CR2032 button battery and insert the new battery into the Buick Excelle remote key, ensuring the positive side faces up. 4. Finally, snap the Buick Excelle remote key casing back together to complete the replacement. The Buick Excelle key contains a button-type battery inside, and replacing it does not require any additional tools; the key itself is sufficient for the replacement.
17
2
Share

Does the Volkswagen Santana belong to FAW or SAIC?

Volkswagen Santana belongs to SAIC Volkswagen. Here is some information about this model: 1. Configuration. The entire lineup has been equipped with RKA tire pressure monitoring system, and comes standard with safety features such as ESP electronic stability program, HBA hydraulic brake assist, ASR traction control system, etc. 2. Powertrain. The new vehicle is powered by a 1.5L naturally aspirated engine. The China V emission standard version delivers a maximum power of 81kW (110PS) and peak torque of 150N·m; while the China VI version produces 82kW (111PS) maximum power and 145N·m peak torque, paired with either a 5-speed manual or 6-speed automatic transmission.
11
2
Share

How to Remove the Steering Wheel of an Audi A4?

Audi A4 steering wheel removal steps are as follows: 1. Remove the cover in the center of the steering wheel, then unscrew the screws on both sides inside the cover and remove the airbag. 2. After removing the airbag, the fixing screw of the steering wheel will be exposed. Use a special tool to remove it. 3. Once the fixing screw is removed, the steering wheel of the Audi A4 can be taken off. Related information about the Audi steering wheel is as follows: 1. If you need to disassemble the car steering wheel, it is best to go to a car 4S shop or a car repair shop and ask professionals to do it to prevent the car fault light from turning on or causing other unnecessary troubles after self-disassembly. 2. Most cars use a multifunctional steering wheel. Through the multifunctional buttons on the steering wheel, you can perform operations such as song switching, volume adjustment, navigation, cruise control, menu control, and light control, greatly facilitating people's car life.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.