Does Slight Water Wading Have a Significant Impact on Cars?

What is the X-TRAIL?

X-TRAIL is a compact SUV under the Nissan brand, known as "Qijun" in Chinese. Here is some relevant information: 1. Introduction to Qijun: The Nissan X-TRAIL, translated as Qijun in Chinese, was launched in Japan at the end of 2000, directly competing with rivals like the Toyota RAV4 and Honda CR-V. 2. Qijun Configuration: The Qijun is equipped with an intelligent All-Mode 4WD system, allowing drivers to freely choose between two-wheel drive, automatic, or locked four-wheel drive modes to handle various road conditions. 3. Qijun Modes: The two-wheel drive mode effectively maintains low fuel consumption during daily driving; in automatic mode, the system intelligently distributes torque between the front and rear wheels from 100:0 to 50:50 based on road conditions, delivering optimal driving performance on all types of surfaces.

15

0

Share

What is the ground clearance of the 2021 Axela?

The minimum ground clearance of the 2021 Axela is 150 millimeters. The minimum ground clearance of the 2021 Axela refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. If the ground clearance of the 2021 Axela is higher, its off-road capability improves. However, if the ground clearance is too high, the stability during high-speed driving may decrease. The Axela was first launched in Japan in 2003 and has now reached its fourth generation, codenamed BP, which was released in September 2019. The dimensions of the 2021 Axela are 4662 mm in length, 1797 mm in width, and 1445 mm in height, with a wheelbase of 2726 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the 2021 Axela is not static; it depends on the load condition. Therefore, changes in the vehicle's load should be considered when evaluating ground clearance. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance may offer better stability and comfort. For long-distance travel or driving in areas with poor road conditions, a higher ground clearance is advisable to enhance off-road performance and avoid damage to the chassis.

11

4

Share

Does No-Rinse Car Wash Solution Damage the Car?

No-rinse car wash solutions do not harm the car paint. Here is an introduction to car paint-related content: 1. Spray Paint: White spray paint is designed to repair scratches on cars, but it definitely differs from the effect of baked paint. 2. Adhesion: The adhesion of spray paint is much worse than that of baked paint, and it may start peeling off after about a year. The difference in paint finish not only has a certain color deviation from the original factory paint but also lacks the gloss of baked paint. Therefore, if you have high requirements for the paint finish, try to avoid using spray paint. Here is additional information about scratches: 1. Scratches: During daily use, it is unavoidable for the car paint to be scratched by hard objects, such as zippers on a passerby's backpack or small stones kicked up while driving, leaving slight marks on the paint. 2. Coating Treatment: Minor scratches are the most common on the car body but do not affect its overall appearance. In such cases, they can generally be ignored. For perfectionists, you can visit a car beauty shop for treatments like coating to restore some of the minor scratches on the car paint.

2

0

Share

What Causes Steering Wheel Vibration at High Speeds?

Steering wheel vibration at high speeds is mostly caused by issues with the tire dynamic balance. A car wheel is an assembly consisting of a tire and a rim, but due to manufacturing factors, the mass distribution of this assembly is not uniform. This leads to dynamic imbalance when the wheel rotates at high speeds, causing the driver to experience noticeable steering wheel vibration. Solutions for steering wheel vibration at high speeds: To prevent or eliminate this phenomenon, the most effective method is to add counterweights to the wheel while it is in motion, correcting the balance at various edges. This process is called dynamic balancing. There are many reasons for wheel dynamic imbalance, including detachment of balancing lead weights, tire repairs, excessive rim repairs, or a large amount of mud on the inner side of the rim. Apart from tire-related issues, other possible causes include faulty shock absorbers, frame deformation, excessive backlash in the main and driven gears of the final drive, etc. It is recommended that car owners regularly perform dynamic balance checks on their wheels. This not only extends tire life but also improves driving stability, preventing accidents caused by loss of control due to tire wobbling or bouncing at high speeds.

13

3

Share

Is starting at 3000 RPM harmful to a CVT transmission?

Starting at 3000 RPM with a CVT transmission can cause some damage to the transmission and clutch plates. Below is an introduction to transmissions: 1. Classification: There are three common types of automatic transmissions in automatic cars, namely dual-clutch transmissions, CVT transmissions, and AT transmissions. 2. Dual-clutch transmission: It connects to the engine via clutch plates. One set of clutches in a dual-clutch transmission controls the odd-numbered gears, while the other set controls the even-numbered gears. Dual-clutch transmissions have fast shifting speeds and relatively high transmission efficiency. 3. AT transmission: AT transmissions connect to the engine via a torque converter. Inside an AT transmission, there are many planetary gears, which are used for speed and torque variation. 4. CVT transmission: The internal structure of a CVT transmission is relatively simple, consisting of only two cone pulleys and a steel belt.

5

1

Share

What are the steps for online compulsory traffic insurance inquiry?

The steps for online compulsory traffic insurance inquiry are: 1. Enter the name of the insurance company you have insured with, followed by 'auto insurance'; 2. After opening the auto insurance page of PICC, look for the policy inquiry option; 3. Enter the license plate number to be checked and the ID number of the policyholder to complete the inquiry. The full name of compulsory traffic insurance is Motor Vehicle Traffic Accident Liability Compulsory Insurance, which is a mandatory liability insurance where the insurance company compensates for personal injury or property loss of victims caused by road traffic accidents involving the insured motor vehicle within the liability limit. Compulsory traffic insurance is China's first mandatory insurance system implemented by national law. Its premium is subject to a nationwide unified charging standard, stipulated by the state, but the price of compulsory traffic insurance varies for different car models.

1

5

Share

Does Slight Water Wading Have a Significant Impact on Cars?

What is the X-TRAIL?

What is the ground clearance of the 2021 Axela?

Does No-Rinse Car Wash Solution Damage the Car?

What Causes Steering Wheel Vibration at High Speeds?

Is starting at 3000 RPM harmful to a CVT transmission?

What are the steps for online compulsory traffic insurance inquiry?

Is the ES200 a hybrid?

Is it necessary to go to a 4S store for car maintenance?

What are the reasons for mistaking the accelerator for the brake?

What does Subject 4 test?