Does Skipping Questions in Subject 1 Count as Wrong Answers?

1 Answers
SanLyla
07/29/25 10:06pm
Skipping questions in Subject 1 does not count as wrong answers. During the exam, if you encounter a question you don't know, you can skip it and come back to answer it later after completing all other questions, as long as you don't click the submit button. Since it's common to feel nervous or encounter unfamiliar questions during the exam, you can confidently skip such questions and move on to the next one. These unanswered questions can be revisited at the end. As long as you stay within the exam time limit and don't click the submit button, it's perfectly fine. However, it's worth noting that the exam system for Subject 1 differs slightly from the practice system we're used to. During the Subject 1 exam, the system will immediately notify you if you answer a question incorrectly. If you make more than 10 mistakes, the system will judge you as failing. Subject 1 consists of 100 questions. According to the regulations on the application and use of motor vehicle driver's licenses, the exam content includes: basic driving theory, road safety laws and regulations, local regulations, and related knowledge. The exam format for Subject 1 is computer-based, and a score of 90 or above is required to pass. Therefore, even if you skip questions, you cannot make more than 10 mistakes.
Was this review help?
10
4
Share
More Forum Discussions

Will There Be Gaps After Replacing the Airbag in a Volkswagen Santana?

There may be gaps after replacing the airbag in a Volkswagen Santana. The airbag is an important passive safety protection system in vehicles, which, when used in conjunction with seat belts, can provide effective protection for occupants. Below is additional information about the Volkswagen Santana airbag: 1. During a collision while driving, the airbag sensor receives the impact signal. If the impact reaches the specified intensity, the sensor activates and sends a signal to the electronic controller. 2. Upon receiving the signal, the electronic controller compares it with its stored data. If the conditions for airbag deployment are met, the controller sends an activation signal via the drive circuit to the gas generator in the airbag assembly. 3. The gas generator ignites the gas-producing agent upon receiving the signal, generating a large volume of gas. This gas is filtered and cooled before entering the airbag, causing it to rapidly inflate through the padding in an extremely short time. The airbag forms an elastic cushion, then promptly deflates and contracts, absorbing the impact energy to effectively protect the head and chest of the occupant, preventing or reducing the severity of injuries.
9
0
Share

What are the criteria for distinguishing the front and back of a tire?

For passenger car tires, there are several criteria to determine the correct orientation: 1. For unidirectional tires, the tire should be mounted on the rim according to the rotation arrow indicated on the sidewall. The rotation arrow on the sidewall should align with the vehicle's forward direction. 2. For asymmetric tread tires, when mounting the tire on the rim, ensure that the side of the tire marked with "outside" faces outward. 3. Tires with raised white lettering on the sidewall or those with a sidewall protection layer should be installed with the side featuring the raised white lettering or the sidewall protection facing outward. The tread pattern is symmetric and non-directional. Below are the consequences of incorrect tire installation: 1. For asymmetric tread tires, the tread pattern affects noise reduction, handling stability, wear resistance, and wet grip performance. 2. If the tire is mounted inside out, situations like high-speed emergency braking, sudden evasive maneuvers, or driving through waterlogged sections may result in unbalanced tire grip.
19
3
Share

Why Is There an Electric Current Sound When Pressing the Accelerator?

The main reasons for hearing an electric current sound when pressing the accelerator while driving are as follows: 1. Abnormal noise from the fuel pump motor: When there is internal wear or impurities in the fuel pump motor, it can produce abnormal noise as you press the accelerator, requiring prompt replacement of the fuel pump. 2. Throttle body noise: The throttle body uses an electronic throttle, and the motor controls the opening and closing of the valve. If the motor gears are worn, insufficiently engaged, or have excessive carbon deposits and sludge, it can cause the throttle body to make noise. The throttle body can be cleaned, and if the motor is damaged, the throttle body needs to be disassembled to replace the motor. 3. Poor lubrication of the accelerator pedal bearing: Poor lubrication of the accelerator pedal bearing can produce noise. You can apply grease to the bearing for lubrication. 4. Damaged clutch release bearing: A damaged bearing can cause the clutch disc to not fully disengage, resulting in abnormal noise. The clutch should be promptly removed to replace the release bearing.
15
3
Share

What transmission does the Mazda CX-4 use?

The Mazda CX-4 is equipped with a Japan-imported 6-speed manual-automatic integrated Skyactiv-Drive 6AT transmission. Here's some knowledge about transmissions: Function of transmission: It is used to change the speed and torque from the engine, and can fix or change the transmission ratio between the output shaft and input shaft in different gears. Components of transmission: It consists of gear transmission mechanism and control mechanism, with some vehicles also having power take-off mechanism. Advantages of Skyactiv-Drive automatic transmission: It adopts multi-plate lock-up clutch, torsional damper with better vibration damping performance, and smaller torque converter, which expands the lock-up range of torque converter to provide better direct driving feel, while improving transmission efficiency and reducing fuel consumption.
16
4
Share

What is the ground clearance of the Audi A6?

The ground clearance of the Audi A6 is 139mm when unloaded and 110mm when fully loaded. The Audi A6's high ground clearance offers the following three advantages: 1. Good off-road capability: It helps the owner easily handle various rural roads and adapt to urban drainage systems during the rainy summer season. 2. Higher safety: The chassis supports the engine and various components, receives the engine's power, and enables the car to move. Vehicles with high ground clearance not only have excellent off-road capability but also significantly enhance the safety performance of the car. 3. Good sportiness: Sedans with high ground clearance have off-road capabilities, allowing the owner to enjoy strong power and driving pleasure when driving outdoors.
2
5
Share

What Procedures Are Required for Vehicle Color Change?

The required procedures for applying to change the color of a motor vehicle include: the "Motor Vehicle Modification Registration Application Form," identity proofs and copies of the vehicle owner and agent, the motor vehicle registration certificate, the motor vehicle driving license, and payment of the fine amount. According to Article 6, Chapter 2 of the "Road Traffic Safety Law," if the color change area of a motor vehicle does not exceed 30%, there is no need to undergo modification registration. Conversely, if it exceeds 30%, it must be filed and recorded, and registration must be completed within 10 days after the vehicle color change. Materials required for color change of vehicles owned by units or companies: "Motor Vehicle Modification Registration/Record Application Form." Identity proof of the motor vehicle owner (for units, the organization code certificate) and copies. Motor vehicle registration certificate and driving license. A set of chassis number rubbings. Power of attorney from the unit and the identity proof of the agent and its copies. Precautions for vehicle color change: Before preparing to change the color of a motor vehicle, it is necessary to consult the vehicle management office where the vehicle is registered to confirm whether the region allows motor vehicles to change colors. If the region does not support this method, the filing procedures cannot be processed after the change, and the vehicle can only be restored to its original color. Additionally, according to Article 10 of the "Motor Vehicle Registration Regulations," owners are no longer required to apply to the vehicle management office in advance. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply to the vehicle management office for modification registration. Moreover, registered motor vehicles must apply for modification registration with the local vehicle management office in the following cases: Change of body color. Replacement of the engine. Replacement of the body or chassis. Whole vehicle replacement due to quality issues. Change of use nature, such as commercial vehicles converted to non-commercial use or vice versa. The motor vehicle owner's residence moves out of or into the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with specified emblem patterns and equipped with alarms and indicator lights as required. Other motor vehicles are not allowed to paint, install, or use the emblem patterns, alarms, or indicator lights exclusive to the aforementioned vehicles or similar to them.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.