Does running only the air conditioning without the engine affect the car?

What is the tire model and size for the Tiguan?

From the detailed configuration table of the PCauto Tiguan, it can be seen that the Tiguan Urban Edition and Trend Edition models use 215/65-R16 tires for both front and rear, while the Tiguan Enjoy Edition, Elite Edition, Smart Edition, and Flagship Edition use 235/55-R17. Relevant information about the Tiguan 1.8TSI-4Motion is as follows: 1. From the actual driving experience: Apart from the slight, less-than-pure blow-off sound when releasing the throttle, it is already difficult to detect through the throttle and tachometer that you are driving a turbocharged car. In urban driving conditions, a light tap on the throttle immediately elicits a positive acceleration response from the Tiguan. Part of the reason is that the 4Motion intelligent all-wheel drive system distributes more power to the rear axle during startup to enhance effective driving force. 2. When the RPM rises to around 2300rpm: The power output officially enters its peak, and as long as you maintain the throttle, your body will remain pressed against the seatback for the next dozen seconds. However, if you drive with a mindset focused on daily commuting, the shift timing around 2500rpm will give you a full sense of lightness, which is also beneficial for fuel consumption.

14

2

Share

Why does the car air conditioning stop cooling after running for a while?

When a car's air conditioning stops cooling after running for a while, it is mostly due to the condenser being covered by pollutants, so regular cleaning is necessary. You can choose to clean it with an air gun or a water gun. Air gun cleaning is simple, relying on a high-pressure air nozzle to blow away the pollutants, but the downside is that it creates a lot of dust. Water gun cleaning involves using a water gun to wash away the pollutants, but it's important to ensure the water pressure is not too high and to maintain a certain distance. More relevant information is as follows: 1. Cleaning the condenser: If the condenser and filter inside the air conditioning system are too dirty, they need to be cleaned promptly. Many people are usually too lazy to clean the condenser, allowing dust to accumulate and thicken, leading to poor heat dissipation and severely affecting the cooling performance. 2. Clogged filter: Another reason could be a clogged air conditioning filter, which can cause the car's air conditioning to stop cooling. In this case, the filter should be cleaned. If the filter is severely damaged, it should be replaced with a new one. 3. Insufficient refrigerant in the air conditioning system: If the air conditioning still doesn't cool, it's likely due to insufficient refrigerant in the system. Since less refrigerant is sprayed from the expansion valve into the evaporator, the refrigerant absorbs less heat, resulting in poor cooling performance. In this case, refrigerant should be added. However, it's important to note that the refrigerant bottle should not be held upside down.

6

0

Share

What does TCS mean in a car?

Traction Control System, abbreviated as TCS, is also known as ASR or TRC. Its function is to enable the car to obtain optimal traction under various driving conditions. Additional Information: 1. The control device of the traction control system is a computer that detects the speed of the four wheels and the steering angle of the steering wheel. When the car accelerates, if the computer detects a significant speed difference between the drive wheels and non-drive wheels, it immediately determines that the driving force is excessive and sends a signal to reduce the fuel supply to the engine, thereby decreasing the driving force and reducing the slip rate of the drive wheels. The computer uses the steering angle sensor to understand the driver's steering intention and then detects the speed difference between the left and right wheels using the wheel speed sensors to determine whether the car's steering degree matches the driver's intention. If understeer (or oversteer) is detected, the computer immediately determines that the driving force on the drive wheels is excessive and sends a command to reduce the driving force to align with the driver's steering intention. 2. The basic working principle of TCS is: during car braking, the wheel speed sensor first measures an AC voltage signal proportional to the speed of the braking wheel and sends this signal to the electronic control unit (ECU). The computing unit in the ECU calculates the wheel speed, slip rate, and the acceleration or deceleration of the wheel. The control unit in the ECU then analyzes and compares these signals before issuing a braking pressure control command to the pressure regulator.

15

4

Share

What is the fuel tank capacity of the Accord?

2022 Honda Accord has a total of 9 models, with fuel tank capacities of 48.5 liters and 56 liters respectively. All models are equipped with a 1.5-liter turbocharged engine and a 2.0-liter naturally aspirated engine, featuring continuously variable transmission (CVT) and electronic continuously variable transmission (E-CVT). All models adopt front-wheel drive. In the same class, the Regal-2022-552T-Intelligence model has a fuel tank capacity of 55 liters, and the Camry-2021-2.0E-Elite edition has a fuel tank capacity of 60 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safety level, and there is still some space from the safety level to the tank opening. This space ensures that the fuel in the tank can expand when the temperature rises without overflowing the safety space of the tank. If the fuel is filled to the tank opening during refueling, the actual refueling amount will be larger than the calibrated fuel tank capacity. If the owner wants to know the remaining fuel in the tank, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it means the fuel is sufficient.

2

Share

Why does the car stall while driving?

The main reasons for vehicle stalling can be categorized into the following four types: 1. Fuel system issues: During normal engine operation, the fuel pump draws fuel from the tank, passes it through the filter into the distribution lines, and then sprays it through the injectors to form an air-fuel mixture. In this process, the fuel pump and injectors are the most prone to failure, followed by filter and fuel line blockages. Please focus on inspecting these two areas. If necessary, clean the fuel lines. To reduce such occurrences, always refuel at reputable gas stations with the correct grade of gasoline, and ensure timely refueling to avoid letting the fuel level drop below the red line. 2. Throttle body blockage: The throttle body is undoubtedly the most critical component and also the most problematic. Generally, maintenance personnel will consider cleaning the throttle body. However, if frequent cleaning doesn't resolve the stalling issue, it usually indicates a fault. Additionally, check the vacuum pump to ensure normal air intake. 3. Abnormal spark plug ignition. Replace spark plugs according to their service life. In gasoline engines, the combustible mixture is ignited by the spark plug near the top dead center of compression. Therefore, when the spark plug fails to function, it naturally causes the vehicle to stall. Typically, replacing the spark plug completely solves the issue. When replacement is inconvenient, temporary solutions like cleaning the electrodes or adjusting the central electrode length can be used as emergency measures. Furthermore, insufficient battery voltage, leakage, faulty ignition coils, or wiring issues can all lead to poor ignition or stalling. 4. Sensor faults causing ECU protective fuel cut-off. Check whether all sensors and actuators are functioning properly. Key sensors include the throttle position sensor, oxygen sensor, and crankshaft position sensor. If the crankshaft position sensor has been replaced, also check if the oxygen sensor is contaminated. Therefore, it is recommended to conduct a comprehensive inspection at a 4S shop, focusing on the spark plugs, fuel pump, and oxygen sensor, followed by ECU matching.

5

3

Share

What to Do When Keyless Entry Fails?

When the keyless entry fails to unlock the car doors, there are typically two possibilities: either the car battery is dead, or the key fob battery is depleted. Regardless of the subsequent troubleshooting or repairs needed, the first step is to use the spare mechanical key to unlock the door. Daily precautions for key fob usage: 1. Avoid proximity to electronic devices: Experts explain that under normal circumstances, the original battery of a smart key can last about two years. However, severe electromagnetic interference can also cause the key fob to malfunction. "In certain environments with strong electromagnetic interference, the wireless communication between the smart key and the vehicle may be temporarily disrupted," says an expert. "If the smart key is stored near a mobile phone for extended periods, its chip can be affected by the phone's frequency, leading to temporary failure." Experts warn that since smart keys use low-intensity radio waves, they should not be placed near electronic products or devices such as radios, TVs, computers, or microwaves, which can act as 'nemeses' to the key fob. Electromagnetic waves not only drain the battery but also damage the chip, eventually causing the smart key to malfunction. 2. Avoid rough handling: Experts emphasize that most smart keys have fragile internal circuitry and are prone to damage from strong impacts. Additionally, water exposure can fry the internal wiring, resulting in remote failure. It's also important to avoid leaving the smart key in high-temperature environments like under the windshield or in direct sunlight. 3. Do not store the spare key inside the car: Losing a smart key due to improper storage can lead to significant inconvenience and high replacement costs. Experts advise against keeping the spare key inside the vehicle or together with the smart key. For smart proximity keys, replacing them requires modifying the car's computer parameters and reprogramming a new set of keys. Owners must provide vehicle and identification documents, and manufacturers must supply the corresponding model parameters or codes. Once replaced, the lost key can no longer start the engine. Another solution is to replace all the car locks, which is more secure but involves higher costs and longer repair times.

2

Share

Does running only the air conditioning without the engine affect the car?

What is the tire model and size for the Tiguan?

Why does the car air conditioning stop cooling after running for a while?

What does TCS mean in a car?

What is the fuel tank capacity of the Accord?

Why does the car stall while driving?

What to Do When Keyless Entry Fails?

Where are Guofeng tires produced?

When Does the Car Radiator Fan Turn On?

How to Determine When Spark Plugs Need Replacement

What are the reasons for no tire pressure after resetting the TPWS on a Camry?