Does Replacing with Genuine Parts Affect the Car?

1 Answers
DePeter
07/29/25 6:15pm
It mainly depends on which part is being replaced. If it's just a small component on the car body, there will be no impact on the vehicle. However, if it's a part of the engine or transmission, there might be some effects. Relevant information is as follows: Precautions for Replacing Parts: Refer to the maintenance manual when replacing parts; Pay attention to the specifications of screws and the force used, and tighten the screws properly after assembly; Be mindful of the assembly sequence and cleanliness; Check if the part's trademark and identification are complete, if the outer packaging is intact, and if the printing on the packaging box is clear. Pay Attention to Part Quality: Inspect the part carefully before use for any rust spots, cracks, or deformation defects; When replacing gears, double-row sleeve roller chains in the transmission box, and driving/driven sprockets, replace them in pairs; When replacing cylinder liners, also replace the piston and piston rings.
Was this review help?
2
4
Share
More Forum Discussions

How Long is the Battery Warranty for the RAV4?

Toyota RAV4 hybrid battery warranty period is 8 years or 200,000 kilometers. Below are the relevant details: 1. Body dimensions: The vehicle measures 4600mm in length, 1855mm in width, and 1680mm in height, with a wheelbase of 2690mm and a fuel tank capacity of 55 liters. 2. Configuration: It features a MacPherson strut front suspension and an E-type multi-link rear suspension. The vehicle is equipped with a 2.5L naturally aspirated engine, delivering a maximum horsepower of 178PS, a maximum power output of 131kW, and a peak torque of 221Nm, paired with an electronic continuously variable transmission.
8
3
Share

What to Do If You're Afraid to Drive After Buying a Car?

Solutions for being afraid to drive after buying a car are as follows: 1. Familiarize yourself with various buttons: This helps you know what to do in emergency situations while driving and reduces fear of the vehicle. 2. Drive familiar routes: Taking routes you know well can alleviate fear. 3. Stick to the same car: It's best to use the same car when you're just starting out. Precautions for novice drivers include: 1. Carry necessary documents: Always have your driver's license, vehicle registration, ID card, etc., to avoid being mistaken for driving without a license. 2. Know traffic rules: Deepen your understanding of traffic regulations to avoid last-minute decisions at intersections about turning right or making U-turns.
1
0
Share

How to Drive Better During the Break-in Period?

Better driving techniques for beginners during the break-in period are as follows: 1. Avoid overloading: The load capacity of the car during the break-in period should not exceed 75% of the rated load. New cars should be loaded below the specified weight and number of passengers, and must not be overloaded. 2. Do not drive at high speeds: There are speed limits for new cars during the break-in period. Domestic cars should stay within 40~70 km/h, while imported cars generally should not exceed 100 km/h. 3. Use high-quality gasoline: The gasoline used for new cars during the break-in period should not be lower than the octane rating specified by the manufacturer. Do not add anti-wear oil additives to avoid insufficient break-in despite reaching the required mileage.
18
3
Share

What is the difference between with T and without T?

There are the following differences between with T and without T: 1. With T: A car with T refers to the engine using turbocharging, where T stands for "TurboBoost", meaning turbocharging. Turbocharging utilizes the high-speed exhaust gas from the engine to drive the turbine, increasing the intake pressure, thereby increasing the intake air volume, making the fuel-air mixture burn more completely, and significantly improving the engine's power and torque, achieving exhaust gas reuse. 2. Without T: Without T means the car uses a naturally aspirated engine. A naturally aspirated engine only uses the negative pressure formed by the piston's downward movement to draw air into the cylinder and combustion chamber, while the exhaust gas is directly discharged without reuse. For engines of the same displacement, the naturally aspirated engine has a smaller intake air volume, and its power and torque are also lower.
10
3
Share

What is the actual fuel consumption of the Foton Cummins 3.8?

Foton Cummins 3.8 fuel consumption is around 16 liters. The reasons for the high fuel consumption of Cummins engines are as follows: Insufficient tire pressure: If the tire pressure is insufficient, fuel consumption will increase; if the tire pressure is normal, you can check the degree of tire wear. When the tires are severely worn, slipping often occurs, which also increases fuel consumption. Excessive carbon deposits: This can lead to higher fuel consumption in the car, which is likely caused by the use of substandard fuel. Oxygen sensor failure: The oxygen sensor mainly monitors the air-fuel ratio of the engine. Once it is damaged, it will cause an imbalance in the engine's air-fuel ratio, inevitably leading to abnormally high fuel consumption.
12
4
Share

How to Remove a Broken Spark Plug?

Methods to remove a broken spark plug: 1. Welding Method: Weld a thin, long iron bolt onto the broken spark plug head, then remove the broken spark plug; 2. Reverse Thread Tool: Special reverse thread tools for removing broken spark plugs are available in many places. Use the reverse thread tool to tap threads inside the broken spark plug head, then turn the tool to extract the broken piece. After removal, use a magnetic rod to clean up any fallen metal fragments as much as possible. If a properly sized long flat-head screwdriver is wedged into the broken head and force is applied to shatter it into the cylinder, then a magnetic rod is used to extract the broken spark plug fragments, this method not only damages the threads on the cylinder but also fails to clean up all the fragments, potentially harming the engine. Therefore, this method is not recommended.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.