Does remotely starting the car and turning on the AC in summer harm the vehicle?

1 Answers
DeVincent
07/30/25 10:19am
Remotely starting the car and automatically turning on the AC will indeed harm the vehicle. It is recommended to turn off the AC before shutting down the engine. Below is relevant information: Vehicle Air Conditioning System: The vehicle air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components. It is designed to regulate the temperature and humidity inside the car, providing a comfortable environment for passengers. Working Principle: When the compressor operates, it draws in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant increase, and it is then sent to the condenser. Inside the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser, causing it to liquefy into a liquid state.
Was this review help?
11
3
Share
More Forum Discussions

Is the engine of the Honda Inspire the same as the Accord?

Honda Inspire shares the same engine as the Accord, both equipped with a 1.5T turbocharged engine, and the chassis and transmission are also identical. This 1.5T engine features VTEC system technology, which stands for Variable Valve Timing and Lift Electronic Control System. This technology balances engine performance and fuel efficiency, delivering a maximum horsepower of 194 PS and a peak torque of 260 Nm. In terms of exterior design, the Honda Inspire boasts sleek lines complemented by a fastback-style roof and large stylish alloy wheels, giving it a strong coupe-like appeal. For the interior, the 8-inch standalone LCD display on the dashboard adopts a physical button layout, offering a clean and intuitive interface with responsive controls, making it very user-friendly.
11
5
Share

Can a new car use the old license plate?

Yes, a new car can use the old license plate. To transfer the old license plate to the new car, you need to go to the vehicle management office to complete the transfer of the old car. During the transfer process, you must request to retain the license plate and surrender the old one first. After obtaining the new car, go to the vehicle management office to retrieve the old license plate by providing the date when the old license plate was surrendered. Owners who retain their old license plates do not receive temporary plates and must display the old license plate until the new metal plate is issued within 15 working days. There are certain conditions for applying to retain the old license plate: 1. All accidents and violations related to the owner's original vehicle must be resolved; 2. The old license plate must have been used for more than 3 years; 3. The owner must not apply within 6 months after completing the transfer or registration procedures for the original vehicle.
6
4
Share

Where is the air filter of the Tharu located?

The air filter of the Tharu is located behind the glove compartment on the passenger side. To replace the air filter, you need to first remove the glove compartment. The air filter is used to filter the air, and the activated carbon air filter also has the effect of absorbing a large amount of odors, which can alleviate respiratory pain, reduce irritation to allergy sufferers, make driving more comfortable, and protect the air conditioning cooling system. The Tharu is a compact SUV under SAIC Volkswagen, with a body length, width, and height of 4453mm, 1841mm, and 1632mm respectively, and a wheelbase of 2680mm. In terms of suspension, the front suspension of the Tharu is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
1
1
Share

What is the normal tire pressure for BMW?

BMW tire pressure is normal between 2.2 and 2.5. The following is a related introduction to BMW tire pressure: The impact of excessive tire pressure value: The contact area between the tire and the ground will decrease. During driving, the pressure per unit area of the tire will be relatively high. If the car is driven on roads with poor conditions, protrusions on the ground may cause the tire to burst, affecting driving safety. The impact of low tire pressure value: The contact area between the tire and the ground will increase. During driving, the tire will generate high temperatures. If driven for a long time, the inner side of the tire will deform, which will shorten the tire's service life and also increase the car's fuel consumption.
4
1
Share

What is the actual speed when the car dashboard displays 70 km/h?

When the dashboard shows 70 km/h, the actual speed is 66-68 km/h. The speed displayed on the dashboard is intentionally set higher than the actual speed. This is not a malfunction of the car but a deliberate setting to ensure driving safety. The difference is usually small, typically within 3%~5%. For ordinary vehicles, the penalties for speeding outside highways are as follows: No penalty for exceeding the speed limit by less than 10%; a fine of 50 yuan and 3 demerit points for exceeding the speed limit by 10% to less than 20%; a fine of 50 yuan and 6 demerit points for exceeding the speed limit by 20% to less than 30%; a fine of 200 yuan and 6 demerit points for exceeding the speed limit by 30% to less than 50%; a fine of 1000 yuan and 12 demerit points, with possible license revocation, for exceeding the speed limit by 50% to less than 70%; a fine of 2000 yuan and 12 demerit points, with possible license revocation, for exceeding the speed limit by 70%. On roads with speed limits below 60 km/h, a warning is issued for exceeding the speed limit by less than 50%. Special vehicles such as medium and above passenger and cargo vehicles, commercial vehicles, school buses, and hazardous material vehicles are subject to their specific regulations. Speeding penalties are differentiated between highways and ordinary roads. This setup is for safety considerations, and there is no need to worry about the impact. A difference of 1-3 km/h is not significant and can ensure driving safety in critical moments.
10
5
Share

What are the ingredients in glass oil film remover?

Glass oil film remover contains abrasive particles and oleophobic components. Here is the relevant introduction: 1. Introduction to glass oil film: Glass oil film is divided into external oil film and internal oil film. External oil film: refers to the stubborn layer formed by the accumulation of various environmental impurities on the outer side of the glass over time. The microscopic surface of this impurity layer is uneven, with water trapped in the gaps, so when the wiper blade passes over it, a continuous fog-like film can be seen. At the same time, this unevenness also affects light transmission, severely impairing visibility and safety during rain, snow, fog, and nighttime driving. Internal oil film: Various oily suspended particles in the air can adhere to the inner side of the glass, such as exhaust fumes, air conditioning, low-quality interior care products, smoking, and many other factors, which can accumulate over time to form an internal oil film. This is particularly noticeable when observing the inner side of the windshield under nighttime lighting, severely impairing visibility and safety during rainy night driving. 2. Function of glass oil film remover: More quickly and efficiently removes regular dirt from the glass surface, effectively delays the formation of external oil film, and thoroughly cleans internal oil film. Used for daily cleaning of glass, generally after each car wash, and can be used both inside and outside the vehicle. It is usually suitable for special surfaces such as tinted glass, coated glass, and acrylic glass. Completely removes periodically formed stubborn dirt, i.e., external oil film. Used for heavy cleaning of external glass, generally once every few months or even a year. It can only be used on regular external glass, not on internal glass, as residual remover is difficult to clean; it should not be used on special surfaces such as coated glass or acrylic glass, as the abrasive components in the glass oil film remover are highly likely to cause irreversible damage to these surfaces.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.