Does rain affect newly applied car window film?

2 Answers
OKing
07/29/25 7:52am
Rain does not affect newly applied car window film. The purposes of car window film are: 1. To reduce sunlight exposure and ensure safety; 2. To block UV rays, prevent skin damage, and reduce aging of car interiors; 3. To protect privacy and ensure safe driving performance; 4. To compensate for the loss of air conditioning cooling capacity, lower the interior temperature, and reduce air conditioning energy consumption; 5. To prevent secondary injuries to passengers caused by accidental glass breakage. Precautions after applying car window film include: 1. Do not vigorously wipe or clean the inside of the glass, and avoid directing cold or warm air from the air conditioning toward the glass; 2. Do not attach suction cups to the filmed glass; 3. When replacing annual inspection stickers, do not stick them directly onto the film.
Was this review help?
2
5
Share
BrodyMarie
08/12/25 11:06am
I recently had window tinting applied to my car, and it rained that very night, which made me quite worried. The next day, I noticed some small bubbles under the film, affecting its appearance. The technician had mentioned that newly applied tint requires 48 hours to fully cure, and water infiltration could lead to poor adhesion or bubbling. I recommend checking the weather forecast before tinting and choosing a sunny day, or parking the car in a garage to avoid rain. If it does rain, don't wipe the windows with a cloth—let them dry naturally to prevent worsening the issue. If bubbles become severe later on, you'll need to return to the shop for repairs, which won't cost much. Regularly inspect and clean your windows to extend the film's lifespan.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

What is the complete process of driving correctly?

The complete process of driving correctly is: 1. Step: Press the clutch pedal deeply with your left foot, ensuring it is fully depressed; 2. Shift: Engage the first gear. If the first attempt fails, pull the gear lever back to the neutral position and try again until successful; 3. Turn: Activate the left turn signal to alert vehicles behind you that you are about to start; 4. Honk: Sound the horn to also alert surrounding vehicles or pedestrians; 5. Release: Release the handbrake, as forgetting to do so may cause the engine to stall; 6. Steady and 7. Lift: Stabilize the throttle and gradually lift the clutch pedal. Once the clutch engagement point is found, gently press the throttle. The vehicle may slightly shake, then move your feet in opposite directions—slowly continue lifting the clutch pedal with your left foot while gradually pressing the throttle pedal with your right foot. The movements should be smooth.
11
2
Share

How many points are deducted for making a wrong turn and going the wrong way?

Making a wrong turn and going the wrong way will result in a deduction of 3 points. Situations where vehicles must yield: When there are traffic signs and markings indicating control, yield to the party with the right of way; in the absence of traffic signs and markings, stop and look before entering the intersection, yielding to vehicles coming from the right; turning motor vehicles must yield to vehicles going straight; motor vehicles turning right from opposite directions must yield to those turning left. Prohibited actions while driving: Motor vehicles are prohibited from reversing at railway crossings, intersections, one-way roads, bridges, sharp curves, steep slopes, or tunnels. Motor vehicles may make a U-turn at locations where there are no signs or markings prohibiting U-turns or left turns, but must not obstruct the normal passage of other vehicles and pedestrians.
19
1
Share

What are the impacts of a car with a replaced roof?

The impacts of a car with a replaced roof are: if the car is involved in a collision, it may cause varying degrees of deformation to the roof, such as twisting, arching, or denting. Pre-departure vehicle inspection: Before setting off each day, conduct a comprehensive inspection of the vehicle, including checking for oil or water leaks, measuring tire pressure to ensure it is appropriate, and examining the engine oil condition to verify its color is normal and the oil level is correct. Safe driving: Use seat belts correctly. In the event of a severe collision, seat belts provide protection no less effective than airbags. Avoid fatigue driving; take a break every 2 hours. Traffic rule compliance: Especially on highways, do not speed. Speeding not only risks traffic police penalties but, more importantly, is unsafe.
18
1
Share

What are the differences between the 9th generation Accord and the 9.5th generation Accord?

The specific differences between the 9th generation Accord and the 9.5th generation Accord are as follows: 1. The light source of the headlights is different. The light emitted by the 9th generation Accord's headlights is granular, while the light from the 9.5th generation Accord's headlights is striped. Moreover, the light source of the 9.5th generation Accord is brighter and has a longer range. 2. Configuration. The 9.5th generation Accord 2.0L Luxury Edition is equipped with ESP, tire pressure monitoring, auto hold, hill start assist, and parking sensors. It can be said that all the mainstream configurations are already included. The 9th generation Accord does not have such high-end configurations. 3. Exterior. The chrome area on the front grille of the 9.5th generation Accord has been reduced.
15
5
Share

Can National V Emission Standard Vehicles Be Licensed in Shenzhen?

National V emission standard vehicles cannot be licensed in Shenzhen. Below is relevant information about National V: 1. Definition: The National Fifth Stage Motor Vehicle Pollutant Emission Standard, abbreviated as 'National V Standard,' has an emission control level equivalent to the Euro 5 emission standard currently implemented in Europe. 2. Differences from National IV: Compared to the National IV standard, the new standard can reduce nitrogen oxide emissions by 25% for light-duty vehicles and 43% for heavy-duty vehicles. Based on Shanghai's annual vehicle registration volume of approximately 350,000 vehicles, it is estimated that annual new vehicle additions could reduce nitrogen oxide emissions by about 1,000 tons. Additionally, the domestic National V standard's emission control level is equivalent to the Euro 5 emission standard currently implemented in Europe.
18
4
Share

How long should you drive after jump-starting a dead car battery?

After a car battery dies, using the vehicle's alternator to fully recharge the battery requires maintaining an engine speed above 2,000 RPM, and the car needs to be driven for at least 4 hours. Additional information about a dead car battery is as follows: 1. If the engine speed cannot reach 2,000 RPM, the charging time will be even longer. 2. The vehicle's alternator needs to operate above 2,000 RPM to reach full load capacity, at which point its power generation matches the nominal value on the nameplate. 3. To jump-start a dead car battery, connect the positive terminal of the battery to the positive terminal of the power source and the negative terminal to the negative terminal to start the car. Inexperienced beginners are not advised to attempt this themselves to avoid accidentally reversing the polarity and damaging the vehicle.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.