···
Log in / Register

Does Quickly Driving onto a Curb Affect the Car?

4 Answers
KendraDella
07/24/25 7:01pm
Quickly driving onto a curb does affect the car, with specific impacts as follows: Tire Impact: First, the tires, as they directly contact the curb, improper operation can cause sidewall ply breakage or bulging. The damage is minimized when the tire is perpendicular to the curb. Wheel Rim Impact: Next, the wheel rims. If the curb is too high, it can scratch or dent the rims, affecting their appearance and even causing deformation. Suspension and Linkage Impact: Then, the suspension and various linkages are prone to deformation. If the curb is excessively high, it may lead to undercarriage scraping, potentially damaging the oil pan, front bumper, and other components.
Was this review help?
2
3
Share
AdelynAnn
08/10/25 8:50am
I often deal with this issue in the repair shop. Many people quickly drive onto the curb thinking they're saving time, but it actually causes significant damage to the car. The most common problems are tires bursting under sudden pressure or rims getting deeply scratched. The suspension system can be impacted and deformed, such as bent shock absorbers or loose control arms, causing the car to pull to one side and requiring a wheel alignment. I've seen many cars needing major repairs because of this, costing thousands to replace parts. Tires and rims directly contact the curb and wear out severely at high speeds. It's recommended to slowly drive onto the curb when parking, not rushing for a moment. If the curb is high, find a lower and flatter spot to reduce the impact. Regularly check the suspension and tire pressure to prevent problems—safe travel is always worth it.
Was this review help?
2
2
Share
Expand All
CooperFitz
09/26/25 3:41am
Thinking back to my first time driving, I was in a hurry to park by the roadside and rushed onto the sidewalk, only to have the tire burst instantly and the rim scratched all around. The repair shop charged me over 800 yuan for a new tire and rim repair! Since then, I've learned my lesson: curb edges are sharp, and hitting them at high speed causes significant impact, potentially deforming suspension components and making the car shake violently. Many of my friends have had similar experiences—repairing scratched rims is troublesome and time-consuming. It's really not worth losing money to save a few seconds. Now, I slow down in advance when parking and look for a gentle spot to mount the curb. Developing good driving habits, avoiding sudden acceleration or operating under high tire pressure, protects not just the car but also your wallet.
Was this review help?
17
0
Share
Expand All
StJace
11/09/25 5:42am
Driving to and from work every day, I've noticed many drivers do this: rushing quickly towards the curb, which has a significant impact on the car. Tires are prone to wear and cracks, and the rims may also deform; the suspension system suffers shocks, which over time can lead to looseness and affect balance. Safety is reduced, and in case of loss of control causing scratches or dents to the car body, the repair costs can be high. Operating slowly is more prudent—don't sacrifice long-term consequences for convenience. Cultivate a calm driving mindset; when approaching a curb, slow down and ensure the position is suitable before parking.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

How to Determine if the Steering Knuckle is Deformed?

Here are the methods to determine if the steering knuckle is deformed: 1. Bearings are prone to damage; 2. Poor steering return; 3. Unusual noises from the vehicle body. Below is additional information about the automobile steering knuckle arm: 1. The automobile steering knuckle arm, commonly known as the "sheep horn," is one of the key components in the vehicle's steering system, ensuring stable driving and sensitive transmission of the driving direction. 2. The function of the automobile steering knuckle arm is to bear the front load of the vehicle, support and drive the front wheels to rotate around the kingpin, enabling the vehicle to steer. Additional information: The steering knuckle is the hinge for wheel steering, shaped like a fork, with two coaxial holes on the upper and lower forks for installing the kingpin. The steering knuckle spindle is used to mount the wheels, and the ears on the steering knuckle's pin holes are connected to the fist-shaped parts at both ends of the front axle via the kingpin, allowing the front wheels to pivot around the kingpin at a certain angle for vehicle steering.
15
4
Share

What does the D in automatic transmission mean?

Automatic transmission D gear refers to the normal driving gear, which is the most commonly used gear. The following are precautions for use: 1. Automatic transmission vehicles can only be started in P or N gear. To remove the P gear, you must step on the brake. You can first step on the brake, shift the gear to N, then start the engine, push the gear to D, and the car can move forward. 2. Do not shift into N gear while driving to coast. If the car is shifted into N gear to coast, the oil pump will not be able to supply oil normally, and lubrication will be impossible, causing the temperature of the internal components of the transmission to rise, which will cause serious damage to the transmission. 3. After the car is parked and the engine is turned off, you must shift into P gear before pulling out the key. The correct parking steps for an automatic transmission are: step on the brake - shift to N gear - pull the handbrake - turn off the engine - shift to P gear, but many people directly push the gear to P. 4. While moving, do not push the gear into P gear. This is a very dangerous action that can cause serious traffic accidents.
7
5
Share

Which button can remove the fog from the front windshield?

The button with a front window-shaped icon represents the front windshield defogging and defrosting function, while the rectangular icon represents the rear windshield defogging and defrosting. Here are the methods to remove fog from the front windshield: 1. First, turn on the car's air conditioning and set it to the hot air position. Then activate the external circulation mode and direct the air vents toward the front windshield to blow hot air directly. This allows outside air to enter the vehicle. Under normal circumstances, the fog on the front windshield will dissipate within about 5 minutes. This defogging method utilizes the heat generated by the engine after it starts operating. As mentioned in window defogging techniques, this approach does not increase the vehicle's fuel consumption and is an economical and effective defogging method. Although the defogging speed is not very fast, combining it with wiping the windshield with a towel makes it both economical and practical. 2. If the fog is not heavy, you can slightly open the side windows to create a gap. This allows air convection inside the car, gradually equalizing the interior temperature with the outside temperature, which will help dissipate the fog. This achieves the same effect as using the air conditioning without increasing fuel consumption. However, this method is not suitable for rainy days.
15
3
Share

How to Deal with Foggy Side Windows in a Car?

Press the defog button, turn on the air conditioning (A/C) switch, set the temperature to the lowest, and switch to external circulation to defog. Both cold and warm air can be used to defog car windows, but warm air is slower than cold air. The most effective method is to use cold air, which blows dry cold air directly onto the glass, preventing water vapor from condensing on the glass and achieving the purpose of defogging. The method of using warm air to defog is the same as using cold air, but it should be noted that warm air should not be used for defogging on rainy days as it may initially increase fogging. When car windows fog up, external circulation should be turned on. The reason for car window fogging: There is a certain temperature difference between the inside and outside of the car. If the temperatures inside and outside the car are different, the surface with the lower temperature will have a lower saturated vapor pressure than the surrounding environment, causing water vapor to gather on the glass surface and form tiny droplets, resulting in fogging. Methods to defog car windows: Air Conditioning Cooling: Use the air conditioning's dehumidification function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car and the air conditioning is not turned on promptly, the high humidity of exhaled air can quickly cause the windshield to fog up. At this time, turn on the air conditioning and blow cold air onto the windshield to use the dehumidification function, which can remove fog from the windshield quickly. However, if the humidity is too high and the air conditioning is not effective, slightly opening a window can quickly reduce the humidity inside the car. Of course, combining this with the air conditioning will yield faster results. Air Conditioning Warm Air: Use the method of reducing the temperature difference to remove fog. In winter, blowing warm air onto the glass can quickly raise the temperature of the windshield, reducing the temperature difference between the inside and outside surfaces of the window, thereby preventing heavy fogging on the windshield. However, it should be noted that the rear and side windows heat up more slowly, so it takes longer to remove all the fog. Whether the air conditioning is automatic or manual, turning it on helps with dehumidification. The temperature control should not be set to the coldest position, as this can cause the outer surface of the windshield to fog up over time. Spraying Anti-Fog Agents for Prevention: Spray a small amount of defogging agent onto the car windows and wipe it clean to remove dirt and stains from the glass. While polishing the glass, a thin transparent protective film is formed, which effectively prevents water vapor from condensing on the glass and forming fog, especially suitable for cold winters. Alternatives to defogging agents include dishwashing liquid, soapy water, glycerin, alcohol, or saline solution. After applying and letting it dry, use a chamois or soft dry cloth to wipe off excess fibers, which can keep the car windows fog-free for several days. Opening Windows for Airflow: If the fog inside the car is not heavy, you can open the side windows to allow air to flow between the inside and outside of the car, reducing the temperature difference and gradually eliminating the fog. The principle of this method is the same as using cold air from the air conditioning. The downside of opening windows for airflow is very obvious—it cannot be used during rain or snow, on highways, or when the fog is heavy.
6
2
Share

What tools are needed for changing the oil of a Jog i?

To change the oil of a Jog i, you will need a wrench, motorcycle screwdriver, etc. Motorcycle oil change process: Check, unscrew the oil dipstick, wipe it clean, put it back in place, then pull it out again to check. If it needs to be replaced, drain the old oil and add new oil. Driving precautions: Drive on the right side and avoid sidewalks. Do not follow too closely; maintain an appropriate distance behind the right rear corner of the vehicle in front. When overtaking, pass from the left side of the vehicle ahead; avoid overtaking from the right or between two parallel vehicles.
5
5
Share

Are Fresher Tires Always Better?

Tires are not necessarily better when they are newer. Automobile Tires: Automobile tires are one of the key components of a vehicle, directly in contact with the road surface. Together with the vehicle's suspension system, they help absorb shocks encountered during driving, ensuring good ride comfort and smooth operation. Precautions for Tire Usage: Enhance awareness of tire safety. Regularly inspect tires, especially before highway driving, conducting thorough checks. In addition to tire pressure, examine the sidewalls for cracks and assess tread wear conditions. Address any potential hazards promptly. Periodically correct wheel balance if it exceeds standard limits.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.