Does Parking with Wheels Not Straightened Have Any Impact?

How Many Days Does It Normally Take to Learn Reverse Parking?

Reverse parking normally takes about three days to learn, with faster learners becoming proficient in just one or two days. Here are the operating techniques for reverse parking: 1. Idle Speed: Maintain a consistent speed using 1st gear or reverse gear idle speed. Start at the same speed you intend to drive. 2. Careful Observation: Control the timing of steering. During the reversing process, observe carefully to grasp the key points of steering and turn at the right moment. 3. Driving Path: Control the driving path. During the test, the car's path mainly depends on the speed of turning the steering wheel and the driving speed. When reversing, accurately align with the boundary lines and promptly adjust the direction to ensure the car enters the parking space straight.

3

1

Share

Must the theoretical test be taken on the same day after passing Subject 3?

It is not mandatory to take the theoretical test on the same day after passing Subject 3. Normally, you take Subject 3 first, followed by the theoretical test, and there can be a gap of several days in between. Below is relevant information about the Subject 3 test: 1. Failing the test: Each subject can be taken once, and if failed, a retake is allowed. If you do not attend the retake or fail it again, the current test session ends, and the applicant must reschedule the test. However, for Subject 2 and Subject 3, rescheduling must be done at least 10 days later. 2. Failing the theoretical test: If the Subject 3 safe driving theory test is failed, the passed road driving skills test results remain valid. The driving skills test permit is valid for three years, and the applicant must complete Subject 2 and Subject 3 within this period. If not completed within the validity period, any passed subject results will be voided.

2

3

Share

How Fast Can You Complete Subjects 2, 3, and 4?

Theoretically, the fastest time to obtain a driver's license is 35 days. There are two factors that affect the speed of obtaining a driver's license: one is the required training hours, and the other is the scheduling time for exams. 1. Each subject has a minimum hour requirement: Each subject has a minimum number of training hours that must be completed before being eligible to take the exam. The Ministry of Transport and the Ministry of Public Security issued the "Motor Vehicle Driver Training and Examination Syllabus," which specifies the requirements for a C1 driver's license: Subject 1 requires 12 hours, Subject 2 requires 16 hours, Subject 3 requires 24 hours, and Subject 4 requires 10 hours. Daily theoretical or practical training cannot exceed 4 hours. 2. Fixed time requirements for exam scheduling: Taking the exam requires scheduling, and there are fixed time requirements for scheduling exams. Articles 40 and 41 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" issued by the Ministry of Public Security state that applicants scheduling Subject 2 must wait at least 10 days after obtaining the learning permit before scheduling the exam; for Subject 3, they must wait at least 30 days after obtaining the learning permit before scheduling the exam.

16

2

Share

Is it necessary to repair scratched underbody paint?

It is necessary to repair scratched underbody paint, as severe scratches can puncture the oil pan, causing all the engine oil to leak out. Moreover, components such as the front suspension, front bumper, and exhaust pipe are particularly vulnerable to damage. The specific reasons are as follows: 1. The exhaust pipe, located at the bottom of the vehicle, is quite fragile: hitting hard objects like sharp rocks can even cause it to tear. Speed bumps are common and vary in height and shape. Some are higher or wider, and if drivers don’t slow down when going over them, the front bumper and exhaust pipe are likely to get damaged. 2. Bottoming out can cause scratches on the underbody: it can also lead to deformation of the underbody, and in severe cases, damage to the engine oil pan, though this is less likely. Scratched areas are prone to rust. 3. Brake fluid line leakage: most modern cars use hydraulic brake systems, and factory-installed brake lines are often made of rubber rather than metal or nylon. If bottoming out occurs, the first thing to check is whether the brake fluid line has ruptured. 4. Oil pan rupture: the oil pans of the engine and transmission are highly susceptible to cracking when bottoming out occurs, leading to oil leakage. This is the most easily noticeable damage, but it must be repaired promptly to avoid permanent damage to the engine.

19

2

Share

What to Do When an Electric Vehicle Stops Running After Passing Through Water?

If an electric vehicle suddenly stops running after passing through water, do not attempt to restart it immediately. Instead, park the vehicle in a safe area and let it dry for one to two hours to restore its performance. Additional Information: 1. Expert Reminder: Electric vehicle owners must assess the water conditions before driving through. For pure electric vehicles, the water depth should not exceed 30cm (15cm for battery-swapping vehicles), and the speed should be controlled below 10km/h. Always monitor the dashboard for any warning signals and drive cautiously. If the vehicle reports an insulation fault, stop immediately for inspection. 2. Reference: Electric vehicles are not suitable for passing through water deeper than half the tire height. In the absence of preceding vehicles or pedestrians as references, use the roadbed or other fixed objects to estimate water depth. If necessary, exit the vehicle and use an umbrella or branch to check the water depth. 3. Immediate Shutdown: Regardless of the electric vehicle's performance, owners should avoid driving through flooded areas whenever possible. Park the vehicle in an open, elevated area. If the vehicle stalls, do not restart it immediately. Instead, park in a safe area and let it dry for one to two hours to restore performance. If an electric vehicle suddenly stops running after passing through water, do not attempt to restart it immediately. Instead, park the vehicle in a safe area and let it dry for one to two hours to restore its performance. Additional Information: 1. Expert Reminder: Electric vehicle owners must assess the water conditions before driving through. For pure electric vehicles, the water depth should not exceed 30cm (15cm for battery-swapping vehicles), and the speed should be controlled below 10km/h. Always monitor the dashboard for any warning signals and drive cautiously. If the vehicle reports an insulation fault, stop immediately for inspection. 2. Reference: Electric vehicles are not suitable for passing through water deeper than half the tire height. In the absence of preceding vehicles or pedestrians as references, use the roadbed or other fixed objects to estimate water depth. If necessary, exit the vehicle and use an umbrella or branch to check the water depth. 3. Immediate Shutdown: Regardless of the electric vehicle's performance, owners should avoid driving through flooded areas whenever possible. Park the vehicle in an open, elevated area. If the vehicle stalls, do not restart it immediately. Instead, park in a safe area and let it dry for one to two hours to restore performance.

2

Share

Is the driving test a total of five attempts or five attempts per subject?

Both Subject 2 and Subject 3 have five attempts. Below are the specific details of the test subjects: 1. Subject content: The test subjects include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). The order of the test subjects is as follows: traffic regulations and related knowledge (referred to as Subject 1 [theory]), field driving (referred to as Subject 2 [nine items]), and road driving (referred to as Subject 3 [road test and safe and civilized driving]). 2. Number of attempts: During the test process, if a previous subject is failed, the following subjects will not be conducted. Each subject test has two attempts. If both attempts are failed, the current test is terminated. During the validity period of the learning driver's license, you can pay the retake fee and retake the test after learning. As for the retake fee, due to varying local conditions, the fees for retakes differ. 3. Test time: After completing the Subject 1 test, you must pass Subject 2 and Subject 3 within three years. If you cannot pass, the test content will be invalidated, and you must re-register for the Subject 1 test. Under the new regulations, both Subject 2 and Subject 3 have five attempts. If you cannot pass the test within the five attempts, you must retake the Subject 1 test.

20

5

Share

Does Parking with Wheels Not Straightened Have Any Impact?

How Many Days Does It Normally Take to Learn Reverse Parking?

Must the theoretical test be taken on the same day after passing Subject 3?

How Fast Can You Complete Subjects 2, 3, and 4?

Is it necessary to repair scratched underbody paint?

What to Do When an Electric Vehicle Stops Running After Passing Through Water?

Is the driving test a total of five attempts or five attempts per subject?

Tips for Poor Wiper Performance in the Middle of Frameless Wipers?

Reasons for Electric Vehicle Brake Failure?

Why is there a strange noise when braking at low speed?

What are the four driving modes of the seventh-generation Elantra?