Does overflowing windshield washer fluid have any impact?

1 Answers
Eddie
07/30/25 8:04am
No harm. Reasons are as follows: 1. Natural drainage: The windshield washer fluid will naturally flow onto the ground. 2. Sealing: Key parts of the engine compartment are sealed, such as the engine box and wiring. Additional information: The functions of windshield washer fluid are as follows: 1. Cleaning performance: Windshield cleaner is composed of various surfactants and additives. Surfactants usually have functions such as wetting, penetrating, and solubilizing, thus playing a role in cleaning and removing dirt. 2. Antifreeze performance: The presence of alcohol and ethylene glycol can significantly lower the freezing point of the liquid, thereby playing an antifreeze role and quickly dissolving frost. 3. Anti-fog performance: A single-molecule protective layer forms on the glass surface. This protective film can prevent the formation of fog droplets, ensuring the windshield is clear and transparent with a clear view. 4. Anti-static performance: After cleaning with windshield cleaner, substances adsorbed on the glass surface can eliminate the charge on the glass surface, providing anti-static performance. 5. Lubrication performance: The windshield cleaner contains ethylene glycol, which has high viscosity and can act as a lubricant, reducing friction between the wiper and the glass to prevent scratches. 6. Anti-corrosion performance: Windshield cleaner contains various corrosion inhibitors, which have no corrosive effect on any metal, and are absolutely safe for car paint and rubber.
Was this review help?
19
3
Share
More Forum Discussions

What is a Fuel Gauge Composed Of?

A fuel gauge is composed of a metal rod and a float, with the float typically made of foam plastic. The end of the metal rod is attached to a variable resistor. A resistor is a device used to impede the flow of electric current. The greater the resistance, the smaller the current that passes through. A fuel gauge is a relatively simple device. The current flowing from the sender passes through a resistor, which may be wrapped around or located near a bimetallic strip. The bimetallic strip is connected to the pointer of the fuel gauge via a linkage. When the resistance increases, the current passing through the heating coil decreases, causing the bimetallic strip to cool. As the strip cools, it straightens, moving the fuel gauge's pointer from 'full' towards 'empty'. The functionality of an automotive fuel gauge is quite advanced, capable of displaying the real-time fuel level in the vehicle's tank, accurately informing the driver about fuel consumption and remaining tank capacity. The fuel gauge indicates whether refueling is needed and how much distance can be traveled after refueling. Essentially, the fuel gauge acts as a warning light for the vehicle's 'life'. It is an indicator on the engine that displays the fuel level, either via a pointer or digital display. Automotive fuel gauges are mainly categorized into two types: digital display fuel gauges and pointer display fuel gauges.
12
1
Share

What are the best tires for GAC Trumpchi GS4?

GAC Trumpchi GS4 uses Michelin PRImACY tires, with the models being 225/60R17 and 225/55R18. Michelin was founded in 1889 in Clermont-Ferrand, France. Over more than 100 years, Michelin has undergone continuous innovation and development. It now operates businesses across five continents and has R&D centers in Europe, North America, and Asia. Michelin tires are marketed in over 170 countries worldwide. For the tires of GAC Trumpchi GS4 in daily use, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves gradually become shallower. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks can be potential hazards for tire blowouts at high speeds. Additionally, promptly remove pebbles from the grooves. Try to park on level ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, the driver should not turn the steering wheel, as this accelerates tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires can overheat, and the pressure may increase. In such cases, stop to let the tires cool down naturally. Avoid releasing air to reduce pressure or splashing water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent and hard braking to prevent accelerated tread wear caused by dragging between the tires and the ground.
7
5
Share

What is the best engine oil for the Superb?

The 1.4T model of the Superb can use fully synthetic 5W30 or 0W30 engine oil, while the 1.8T and 2.0T models require fully synthetic 5W40 or 0W40 engine oil. If you want to change the engine oil during later maintenance, you can choose brands such as Shell or Castrol. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand low temperatures of -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the number, the better it can maintain viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in the Superb is as follows: Wait for the engine temperature to drop, and also allow the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to flow out; Use a special wrench to remove the oil filter; Apply engine oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine valve cover, generally filling about three-quarters of a bottle; Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If there are leaks, they should be repaired; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
6
5
Share

Are 7-Seater Vehicles Exempt from Inspection for 6 Years?

According to the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China': Non-commercial 7-seater vehicles are exempt from inspection for six years, with inspections required every two years from six to ten years, and annually for vehicles over ten years old. Vehicles over 15 years old require inspection every six months. For commercial 7-seater vehicles, inspections are required annually within the first five years and every six months thereafter. Documents required for vehicle annual inspection include the vehicle's driving license, valid compulsory traffic insurance policy, the owner's ID card, and all traffic violation records must be cleared in advance. Additional notes: For cargo vehicles and large or medium-sized non-commercial passenger vehicles, inspections are required annually within the first ten years and every six months thereafter. For motorcycles, inspections are required every two years within the first four years and annually thereafter. According to the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China', the main items included in vehicle annual inspection are: Exterior inspection: Mainly checks vehicle lights, body appearance, suspension, sunroof, and tires. It verifies if the lights are functioning correctly, if there are any non-working lights, if the vehicle's color has been changed, and if the suspension has been modified. Emission test: Checks if the vehicle's tailpipe emissions meet national standards during high-speed operation. On-line inspection: Primarily examines the vehicle's braking system, headlights, horn, and chassis. Violation check: All traffic violation records must be cleared before the annual inspection to pass. Vehicle annual inspection can be conducted up to 90 days in advance but must not be overdue. According to the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China', the consequences of overdue inspection are as follows: Vehicles that fail to undergo inspection on time are not allowed on the road. Driving an uninspected vehicle on the road results in 3 penalty points and a fine of 200 yuan. In case of a traffic accident involving an uninspected vehicle, the party involved bears full or primary responsibility, and the insurance company will not compensate. Driving an uninspected vehicle on the road is considered illegal driving and may lead to vehicle impoundment.
14
3
Share

Is a Vehicle Prohibited from Road Use with 3 Traffic Violations?

3 unprocessed violations prohibit road use, but processed ones allow driving. 1. Unprocessed violations: If a driver has more than 3 outstanding traffic violations, being caught by traffic police will result in license suspension, and in severe cases, vehicle impoundment. 2. Violation handling methods: Violations can be processed all at once or selectively, and objections can be raised with an application for administrative reconsideration. If no objections exist, after completing point deductions, a violation notice and fine ticket will be issued. These can be paid at designated banks (Industrial and Commercial Bank, China Construction Bank, Rural Credit Cooperatives).
13
1
Share

What to Do If Exterior Wall Paint Gets on the Car?

Methods to remove exterior wall paint from the car: 1. Use industrial alcohol for wiping: Pour a small amount of prepared alcohol onto a clean cloth, then wipe the areas with construction paint on the car. 2. Paint thinner: Spray paint thinner on the affected areas, and once the thinner has soaked in, rinse it off with water. 3. Warm water soaking: If the paint hasn't completely dried, you can first wash the exterior wall paint attached to the car body with water or car wash liquid, then soak a clay bar in warm water and gently wipe the affected areas while spraying.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.