Does not paying the fee for Subject 1 count as a successful appointment?

1 Answers
LaJude
07/30/25 10:31am
The first appointment for Subject 1 does not require payment to be successful, but if you fail, a second appointment will require payment of a retake fee to be successful. The total time for the Subject 1 exam is 45 minutes, and the test paper consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 and a passing score of 90. The test paper is randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Specifications." Exam process: Follow the instructions of the staff and receive your driving school file in order in the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off when entering the exam area; No loud noise is allowed in the exam area; Regulation textbooks are not allowed in the exam area (or should be placed in a bag); After the exam, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the exam room; Candidates who pass the exam will sign under the guidance of the staff at the exit and leave the exam room; Candidates who fail the exam can leave the exam room and wait for notification from their driving school regarding the retake time.
Was this review help?
6
4
Share
More Forum Discussions

What is the function of the small square on the dashboard of the Baojun RS3?

The function of the small square on the dashboard of the Baojun RS3 is to alert the owner of an engine malfunction, indicating that the vehicle's engine requires maintenance or servicing. The specific reasons are as follows: Carbon buildup inside the engine cylinders: After a certain period of use, the engine will inevitably accumulate carbon deposits. These deposits can alter the engine's design parameters and are inherently unstable, trapping heat. This trapped heat can cause uncontrolled ignition, leading to engine knocking. In such cases, the engine fault light will illuminate. Poor combustion state: A poor combustion state is the primary reason for the engine fault light to come on. In automotive design, to ensure the engine operates in good condition and maintains a normal working lifespan, an oxygen sensor is installed to monitor the combustion state. If the combustion state is poor, it not only pollutes the environment but also leads to fuel wastage and excessive engine wear.
9
1
Share

How many meters should the warning triangle be placed from the accident vehicle?

On highways, during the day, it should be placed at least 150 meters behind the vehicle, and at night, at least 250 meters behind. On regular roads, during the day, it should be placed at least 50 meters behind the vehicle, and at night, at least 150 meters behind. The purpose and precautions for placing the warning triangle are as follows: Purpose: The warning triangle, also known as a caution sign, is used when a vehicle breaks down on the road. Placing it at the appropriate distance behind the vehicle alerts approaching drivers that there is a stopped vehicle ahead, prompting them to slow down and pass safely. Alternatively, placing debris or branches between the vehicle and the warning triangle can prevent drivers from bypassing the sign and causing a rear-end collision. Precautions: The warning triangle should not be placed to the side or rear of the vehicle. In the event of an accident, no other items should be used as a substitute for the warning triangle. It should not be held by hand. Even if the warning triangle is placed, the vehicle's hazard lights must be turned on. After use, the warning triangle should be promptly retrieved and stored in its original place for quick access next time. According to Article 60 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," if a motor vehicle breaks down or is involved in an accident on the road, obstructing traffic and making it difficult to move, the hazard warning lights must be turned on, and a warning sign should be placed 50 to 100 meters behind the vehicle. At night, the position lights and rear lights should also be turned on.
18
1
Share

What Does Flashing Headlights Three Times Mean?

It is usually to remind the owner of a neighboring vehicle to conduct an inspection. When noticing issues such as an unclosed door, unlit headlights, or insufficient tire pressure on a nearby car, flashing the headlights three times in succession can alert the driver to stop and check, thereby avoiding potential accidents. The meanings of flashing headlights are as follows: Flash once: This most commonly occurs at traffic lights. When the light turns green and the car ahead does not start promptly, the following car may flash its headlights once as a reminder. Additionally, flashing while turning serves to alert oncoming vehicles and pedestrians. When driving in residential areas with mixed traffic, flashing at night can also signal vehicles and pedestrians. It is essential to maintain low speed to ensure the safety of pedestrians and non-motorized vehicles. Flash twice: While driving at night, if the strong beams from an oncoming vehicle dazzle you, flashing your headlights twice consecutively can remind the other driver to switch off their high beams. Of course, such flashing carries a hint of dissatisfaction, so upon noticing this, it is important to correct the behavior promptly and develop a habit of using high beams appropriately. Flash three times: Flashing headlights three times during road travel is indeed rare, but if a vehicle behind you does so, it should be taken very seriously. Generally, this indicates that the following vehicle has spotted a safety hazard, such as an unclosed trunk, an open fuel cap, or even a flat tire, often due to the driver's carelessness.
1
1
Share

What engine is used in the new Santana 1.5 manual transmission?

The new Santana 1.5 manual transmission is equipped with a 1.5L naturally aspirated engine model EA211. EA211 series engine: The EA211 series engine is the successor to the EA111 series engine, currently available in multiple displacement models including 1.0L, 1.6L, 1.2T, and 1.4T. The most notable features of the EA211 series engine are its lightweight design, platform compatibility, and modularity. Engine block: In terms of engine block material, the original EA111 engine used a gray cast iron block, while the new EA211 engine adopts an all-aluminum block, which not only reduces weight but also improves heat dissipation capability.
8
4
Share

What does the triangle symbol with an exclamation mark mean?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's regular performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, exterior light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common warning symbol in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning light, signaling a transmission malfunction or low transmission fluid. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically indicating brake system failure or low brake fluid. Immediate inspection of the brake system is necessary to avoid accidents. Tire Pressure Anomaly: A bracket with a horizontal line and an exclamation mark in the middle indicates a tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is a lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
9
4
Share

What is the tire specification for the Toyota Corolla?

Toyota Corolla's tire specification is 195/60r15. The tires support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. Tires determine driving safety, handling stability, comfort, and fuel economy. The Corolla is a compact car under Toyota, with a length, width, and height of 4530mm, 1705mm, and 1490mm respectively, and a wheelbase of 2600mm. The Toyota Corolla uses two engines in total, one is a 1.6-liter naturally aspirated engine, and the other is a 1.8-liter naturally aspirated engine. The Corolla is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of trailing arm.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.