Does Motorcycle Demerit Points Affect B2 License?

1 Answers
MacJake
07/30/25 7:47am
B2 demerit points do not have a significant impact as long as the violations are promptly addressed. However, if 6 points are deducted during the probationary period, the probation period will be extended. Additionally, a B2 driver's license with demerit records requires participation in a review. Below are detailed explanations: Demerit Point Handling: If a motor vehicle driver's demerit points within a scoring cycle do not reach 12, and the imposed fines have been paid, the demerit points will be cleared; if the demerit points do not reach 12 but there are unpaid fines, the demerit points will carry over to the next scoring cycle. 6 Points During Probation: For drivers holding licenses for large buses, tractors, city buses, medium buses, or large trucks, if 6 or more points (but less than 12) are deducted within the one-year probation period, the probation period will be extended by one year. Review: Drivers holding licenses for large buses, tractors, city buses, medium buses, or large trucks must report to the traffic management department of the public security authority for a review within thirty days after the end of each scoring cycle. However, if there are no demerit records within a scoring cycle, the review for that cycle is exempted.
Was this review help?
13
2
Share
More Forum Discussions

Can Motorcycles Use Bus Lanes?

Motorcycles should drive in the rightmost lane. If there are traffic signs indicating the speed limit, they should drive according to the indicated speed. Below is relevant information: "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": Article 44: On roads with two or more motor vehicle lanes in the same direction, the left lane is the fast lane, and the right lane is the slow lane. Motor vehicles driving in the fast lane should drive at the speed specified for the fast lane; if they cannot reach the specified speed, they should drive in the slow lane. Article 57: Non-motor vehicles driving on the road should comply with relevant traffic safety regulations. Non-motor vehicles should drive in the non-motor vehicle lane; on roads without a non-motor vehicle lane, they should drive on the right side of the motor vehicle lane.
3
3
Share

What does it mean to receive a vehicle relocation text message?

It could be a prank or fraudulent information. Be very cautious when encountering such calls and never disclose any personal privacy information - safety first. Below is relevant information: On-site penalty tickets: If an on-site penalty ticket is not paid within 15 days, late fees will be incurred. For non-on-site violations, as long as there are no more than five, they can be handled during the vehicle's annual inspection. Traffic violation fines: Traffic violation fines are based on the date of the traffic violation notice issued by the traffic police. After receiving the notice, the fine must be paid at a designated bank within 15 days. Late fees will be charged after 15 days. Non-on-site violations captured by electronic monitoring: For non-on-site violations captured by electronic monitoring, as long as you report to the traffic police before the vehicle's annual inspection and then pay the fine at a designated bank within 15 days of receiving the violation notice issued by the traffic police, it's acceptable. Late fees will also be charged after 15 days.
17
4
Share

How Often Should a Motorcycle Chain Be Tightened?

Motorcycle chains should be tightened approximately every 1-2 weeks if the motorcycle is used frequently. Below are detailed guidelines regarding motorcycle chains: Replacement cycle for motorcycle chains: Motorcycle chains should be replaced every 3 years or 20,000 kilometers. They must be adjusted regularly as required, ensuring proper alignment and tension during the adjustment process. Alignment means ensuring the sprockets and chain are in a straight line, which helps prevent excessive wear and chain disengagement during riding. While over-loosening of the chain is rare, prolonged use without adjustment can cause the chain to stretch due to wear or deformation. Whether the chain and sprockets are new or old, if the chain disengages from the sprocket even once, it generally should not be reused as the chain may bend or deform during the disengagement. Maintenance methods for motorcycle chains: When riding, try to choose smooth road surfaces and avoid muddy or sandy areas. Regularly check the chain for clogging by dirt or sand and clean it periodically. Perform chain maintenance every 300 kilometers. During maintenance, first apply chain oil, then brush on engine oil. Use a fine, soft-bristled brush to apply the oil slowly and carefully.
19
0
Share

How to Engage First Gear and Reverse Gear in a Manual Transmission?

To shift gears, first press the clutch pedal of the car, then move the gear lever to the desired position, and gradually release the clutch while pressing the accelerator pedal. Press the car's brake pedal. Press the car's one-touch start button. The dashboard lights up, indicating the vehicle has started. Press the clutch pedal. Move the gear lever to the first gear position. For reverse gear, place the gear lever in the reverse position. While releasing the clutch, press the accelerator pedal. The vehicle will then begin to move in the desired direction.
15
1
Share

How to Connect Bluetooth in Kia K5?

First, turn on your phone and locate the Settings icon on the home screen. Then find and select the Bluetooth option. Next, navigate to the car's Bluetooth interface, access the menu, and click on Settings. Locate the Bluetooth option and enter it. After entering, click on 'Add Device'. When your phone detects the car's Bluetooth, select it to initiate the connection. Proceed with the pairing process between your phone and the car's Bluetooth, and wait for the pairing to complete. Finally, the connection status between your phone and the car's Bluetooth will be displayed.
13
0
Share

How to Connect Bluetooth in Accord?

First, turn on the Bluetooth function in your phone settings and set it to "Visible to Everyone" mode, keeping it on the Bluetooth settings interface. The Bluetooth settings can be operated on the information display screen. In the vehicle system, click the settings function, select the "Phone" option, and then add a Bluetooth device. Display the searched devices. If the phone device is not found, use the phone to search for HondaHFT. If the pairing is successful, a notification will appear on the screen.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.