Does Motor Vehicle Damage Insurance Cover the Windshield?

Where is the Geely Emgrand engine produced?

Geely Emgrand engine is produced by Geely. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 80kW and a maximum power speed of 6000rpm. It is paired with a 5-speed manual transmission. The front suspension uses MacPherson independent suspension, and the rear suspension uses torsion beam non-independent suspension. Geely Emgrand is a compact car under Geely Auto, with a body structure of a 4-door 5-seater sedan. Its body dimensions are: length 4632mm, width 1789mm, height 1470mm, wheelbase 2650mm, and fuel tank capacity of 50L.

6

0

Share

How to Open the Fuel Tank Cap of Chevrolet Cavalier?

The method to open the fuel tank cap of Chevrolet Cavalier is: locate the fuel tank cap switch below the left side of the driver's seat and pull it upwards to open. The Chevrolet Cavalier is a compact sedan. Taking the 2020 Cavalier as an example, its body dimensions are: length 4474mm, width 1730mm, height 1471mm, with a wheelbase of 2600mm, a fuel tank capacity of 36 liters, and a trunk capacity of 469 liters. The 2020 Cavalier is equipped with a 1.0T turbocharged engine, delivering a maximum power of 92kW and a maximum torque of 180Nm, paired with a 6-speed automatic transmission. It features a MacPherson strut front suspension and a torsion beam rear suspension.

9

2

Share

How to Check for Insufficient Coolant in a Car?

To check for insufficient coolant in a car, follow these steps: 1. Start the vehicle and let the system perform a self-check. Observe the dashboard for fluid level indicators; 2. Pull the hood release handle located near the driver's seat to open the hood, then inspect the coolant reservoir, which is marked with high and low level indicators. Coolant is a liquid containing special additives, primarily used in liquid-cooled engine cooling systems. Important precautions include: 1. Do not mix different types of antifreeze; 2. Never open the radiator cap or drain valve immediately after driving; 3. When replacing coolant, ensure all old antifreeze is completely removed and the radiator is thoroughly cleaned.

11

1

Share

Should you use one foot or two feet for the accelerator and brake in an automatic transmission car?

In an automatic transmission car, you should use one foot for both the accelerator and brake pedals, which are positioned on the right side of the footwell. The steps to start an automatic transmission car are: 1. After sitting in the driver's seat, press the start button directly; 2. Depress the brake pedal and press the start button to ignite the engine; 3. Release the foot brake and allow the car to warm up; 4. Depress the brake pedal again and shift to D (Drive) gear; 5. Release the handbrake and slowly lift your foot off the brake to start moving. An automatic transmission car does not require the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on speed and traffic conditions. The gears in an automatic transmission car are: 1. P (Park) for parking; 2. R (Reverse) for reversing; 3. N (Neutral) for neutral; 4. D (Drive) for driving forward; 5. S (Sport) for sport mode; 6. L (Low) for low gear.

1

2

Share

What is the appropriate engine speed for high-speed driving?

When driving at high speeds, it is appropriate to keep the engine speed between 2000 and 3500 RPM. Precautions for high-speed driving include: 1. Quickly accelerate to a certain speed when entering the main lane from the ramp; 2. Do not obstruct vehicles already driving in the main lane when merging; 3. Always pay attention to roadside and road signs and markings, and drive appropriately to the right; 4. Maintain a safe longitudinal distance between vehicles; 5. When overtaking, use the left turn signal and honk the horn, passing the vehicle ahead from the overtaking lane; 6. In case of an emergency requiring a stop, quickly signal to the right, slow down and stop in the emergency lane, turn on the hazard lights, and place a warning sign behind the vehicle; 7. Distinguish lane functions and drive in the appropriate lane.

1

3

Share

How to Avoid Stalling When Starting on a Slope in Daily Driving?

Methods to avoid stalling when starting on a slope in daily driving: 1. Ensure the gear is in neutral and the handbrake is firmly engaged to prevent the vehicle from rolling backward; 2. Press the clutch pedal all the way down with your left foot, shift into first gear, hold the steering wheel with your left hand, and grasp the handbrake with your right hand; 3. Slowly lift the clutch pedal with your left foot to the semi-engagement point, then hold it steady, gently press the accelerator with your right foot, and quickly release the handbrake; 4. After the vehicle starts moving, gradually release the clutch pedal completely and add a bit more throttle with your right foot to accelerate up the slope. During the process of starting on a slope, it's important not to release the clutch too quickly. Once it reaches the semi-engagement point, keep it steady—avoid further releasing or pressing down, as this can easily cause the vehicle to stall. Once the vehicle begins moving forward, fully release the clutch pedal. Avoid prolonged semi-engagement of the clutch while applying throttle, as this can also be harmful to the vehicle.

13

2

Share

Does Motor Vehicle Damage Insurance Cover the Windshield?

Where is the Geely Emgrand engine produced?

How to Open the Fuel Tank Cap of Chevrolet Cavalier?

How to Check for Insufficient Coolant in a Car?

Should you use one foot or two feet for the accelerator and brake in an automatic transmission car?

What is the appropriate engine speed for high-speed driving?

How to Avoid Stalling When Starting on a Slope in Daily Driving?

Where is the handbrake in a BMW?

How to Use the Adaptive High Beam on the Levin?

How to Display the Tachometer on Volvo XC60?

What is the Difference Between Chassis Armor and Engine Guard Plate?