Does modifying the front grille affect annual inspection?

Where is the fuel tank release button on the Tiguan?

The fuel tank release button on the Tiguan is located at the rear of the vehicle. The specific opening methods are: 1. There is a circular button at the rear of the car - press it firmly downward with your thumb; 2. There is a fuel pump symbol button on the driver's side door panel - flipping this will also pop open the fuel filler cap. The Tiguan is a vehicle produced by Shanghai Volkswagen, with body dimensions of 4506mm (length) × 1809mm (width) × 1685mm (height). In terms of power, the Tiguan is equipped with a 1.8T inline 4-cylinder turbocharged engine, paired with a 6-speed automatic transmission, delivering maximum power of 118KW and maximum torque of 250NM.

3

Share

What engine does the BMW 5 Series GT have?

BMW 5 Series GT has four engine options: 2.0L turbocharged, 3.0L turbocharged, 4.0L turbocharged, and 4.4L turbocharged. The 2.0L engine delivers a maximum power of 245 horsepower and 350 Nm of torque. The 3.0L engine produces 306 horsepower and 400 Nm of torque. The 4.0L engine generates 408 horsepower and 600 Nm of torque, while the 4.4L engine offers 407 horsepower and 600 Nm of torque. The BMW 5 Series GT measures 4,998 mm in length, 1,901 mm in width, and 1,559 mm in height, with a wheelbase of 3,070 mm. The car features a bold, one-piece large-sized double-kidney grille. The adaptive LED headlights with BMW Dynamic Beam technology replace the hexagonal design with a sleek and slender horizontal L-shaped light strip, complemented by the new BMW Intelligent Laser Headlights with blue laser.

20

1

Share

Where is the engine of the Roewe RX3 produced?

Roewe RX3's engine is produced in Shanghai. The Roewe RX3 is a new compact SUV launched by SAIC Roewe, equipped with two engine options: 1.6L and 1.3T, offering a total of 7 models. The dimensions of the Roewe RX3 are 4408mm in length, 1804mm in width, and 1651mm in height, with a wheelbase of 2625mm. The RX3 continues the family-style design elements of Roewe, with an overall style very similar to the Roewe RX5 model, featuring an inverted trapezoidal chrome grille paired with eagle-eye-style headlights. The new car's taillights use LED light sources and come with a three-spoke multifunction steering wheel, the design of which closely resembles that of the Roewe RX5. The air vents adopt a circular design with adjustable knobs.

17

3

Share

Where is the ambient light switch for the Volkswagen Teramont?

The ambient light switch for the Volkswagen Teramont is located in the settings menu of the central control screen. Enter the 'car' section on the central control, click on 'settings' in the lower right corner, and select 'ambient lighting'. The ambient lights will automatically turn on under the following conditions: 1. When unlocking the car or opening a door; 2. After turning on the ignition or starting the engine, the ambient lights will automatically adjust their brightness and ensure indirect illumination. The Volkswagen Teramont is a mid-to-large-sized SUV under the Volkswagen brand, with body dimensions of 5039mm in length, 1989mm in width, and 1773mm in height, and a wheelbase of 2980mm. In terms of power, the Volkswagen Teramont is equipped with three types of engines: a low-power version 2.0L turbocharged engine, a high-power version 2.0L turbocharged engine, and a 2.5L V6 turbocharged engine.

15

5

Share

What is the penalty for not driving in the designated lane on the highway?

Driving a motor vehicle on the highway without following the designated lane has the violation code: 43120, with a penalty standard: 3-point deduction plus a fine. Driving a motor vehicle without following the designated lane usually refers to violations such as not staying in the correct lane, crossing or straddling lane lines. Below are precautions for driving on the highway: 1. Drive in the designated lane: Highways have clearly marked lanes, including dedicated lanes for large vehicles, small vehicles, etc. When overtaking, once you occupy a lane, return to your own lane promptly after completing the overtaking maneuver, and avoid occupying other lanes for extended periods. Additionally, the emergency lane should not be occupied for non-emergency reasons. 2. Maintain a safe speed and avoid speeding: The dangers of speeding are well-known, as it can lead to irreversible consequences both on local roads and highways. 3. Maintain a safe following distance: Under normal conditions, when the road is dry and the brakes are functioning well, the following distance (in meters) should not be less than the speed (in km/h). For example, at 80 km/h, the distance should be no less than 80 meters, and at 100 km/h, no less than 100 meters. Always pay attention to roadside signs indicating following distances. In rainy, foggy, snowy, or wet road conditions, the following distance should be doubled or more. 4. Observe traffic signs: Always be aware of roadside and overhead signs and markings while driving, and stay slightly to the right to avoid running over the right lane divider, providing sufficient lateral space for overtaking vehicles. 5. Do not arbitrarily occupy the emergency lane in case of accidents: Traffic accidents are inevitable on highways. If other vehicles cause a blockage in the driving lane, do not occupy the emergency lane without reason, as this may hinder rescue vehicles from performing their duties. 6. Avoid fatigued driving and take timely breaks: Fatigued driving is extremely dangerous on highways. When fatigued, the body's reaction time slows, making it difficult to respond correctly to sudden situations.

10

5

Share

Can a Cracked Plastic Bumper Be Repaired?

Can a Cracked Plastic Bumper Be Repaired? The answer is yes. Here is relevant information: Automobile Bumper: An automobile bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear parts of the vehicle body. It acts as a buffer when the car or driver is subjected to collision forces. Composition: A plastic bumper consists of three main parts: the outer panel, cushioning material, and crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping 1.5mm-thick cold-rolled sheet metal into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then connected to the vehicle frame's longitudinal beams with screws, allowing for easy removal. The plastic used in such bumpers is primarily polyester-based or polypropylene-based, manufactured through injection molding.

14

3

Share

Does modifying the front grille affect annual inspection?

Where is the fuel tank release button on the Tiguan?

What engine does the BMW 5 Series GT have?

Where is the engine of the Roewe RX3 produced?

Where is the ambient light switch for the Volkswagen Teramont?

What is the penalty for not driving in the designated lane on the highway?

Can a Cracked Plastic Bumper Be Repaired?

What engine does the Changan Yuexiang V5 have?

Does Slight Water Intake Affect the Engine?

How to Turn on the Headlights of Borgward Cars?

Why does the sunroof open automatically?