Does modifying fog lights affect vehicle inspection?

1 Answers
VonAyla
07/28/25 5:39pm
Installing fog lights does not affect vehicle inspection because the car itself has reserved positions for adding front fog lights, which is not considered illegal modification. Fog lights generally refer to automotive fog lights installed at the front and rear of the vehicle. Since light can increase visibility distance, especially the strong penetration of yellow anti-fog lights, they can improve the visibility of the driver and surrounding traffic participants when visibility is low in foggy conditions and the driver's line of sight is restricted, allowing oncoming vehicles and pedestrians to spot each other from a greater distance. When installing fog lights, pay attention to the following three points: 1. Install through official channels and avoid DIY. 2. The choice of fog lights should not be too exaggerated. 3. Remember to file the modification after changing the appearance.
Was this review help?
20
5
Share
More Forum Discussions

What Causes Abnormal Noises in Automatic Transmission Cars?

Automatic transmission cars produce abnormal noises primarily due to bearing wear and damage. Below is an introduction to automatic transmissions: 1. Automatic Principle: The engine's power is transmitted through the transmission, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume over 10% more fuel than manual transmissions. Whether manual or automatic, more gears mean better fuel efficiency. 2. Driving Tips: For manual transmission cars, it's advisable to shift gears at higher RPMs. Engines are designed to operate at higher RPMs, with parameters like dynamic balance and rotational inertia optimized for these conditions. Prolonged operation at non-standard RPMs increases internal component load and wear, leading to frequent vibrations and knocking, and reduces engine lifespan. Shifting at 3000 RPM ensures post-shift RPMs around 2300, keeping the engine within a healthy operating range.
6
4
Share

Why is the rear armrest box of the Mercedes-Benz E300L stuck?

It may be because the armrest box is stuck due to being pressed too deep or the inner cover plate of the rear armrest box is damaged. Below is an introduction to the Mercedes-Benz E300L: 1. Exterior: The front face design is identical to the imported version, with sharp lines on the split high and low beams, giving an overall youthful and dynamic effect. The LED light group below the front of the car interprets the word 'fashion' even more thoroughly. 2. Interior: The dark gray interior appears relatively youthful, paired with brown seats, giving a high-end feel. The focal point on the upper part of the center console is the large-sized GPS navigation screen. The middle section consists of audio control buttons. The lower part houses the air conditioning control buttons.
10
5
Share

Why is the Mazda3 display screen not lighting up?

If the Mazda3 screen is not lighting up, it may be due to looseness or poor contact affecting it. The center console screen is just a display, which is connected to the main unit via wires. If the wiring harness plug becomes loose, the screen may not light up. Additional information about the Mazda3 is as follows: 1. Model: The Mazda3 is positioned as a compact car. It is a compact model launched by Mazda. 2. Exterior: The newly redesigned model features a fresh design, with an appearance that better aligns with the aesthetic preferences of modern young consumers. The car adopts Mazda's signature KODO design language, featuring a large front grille adorned with horizontal chrome trim for a more refined look. Additionally, the headlights on both sides of the front fascia have been adjusted, with an upward-slanting design that connects to the grille, giving the front a more aggressive appearance. From the side profile, the rising waistline visually elongates the car's body. 3. Configuration: The car offers two powertrain options, equipped with 1.5L and 2.0L naturally aspirated engines. The 1.5L engine delivers a maximum power of 86kW and a peak torque of 148Nm, while the 2.0L engine produces a maximum power of 116kW and a peak torque of 202Nm. The transmission system is paired with a 6-speed automatic transmission.
13
5
Share

Is Drilling Holes for Car Dent Repair a Concern?

There is no need to worry excessively as the drilled holes will be refilled with metal plastic steel putty, which will not have any impact on the vehicle. Car dent repair technology, also known as micro bodywork or non-destructive bodywork, differs from traditional bodywork techniques primarily in its non-destructive nature. 1. Purpose: This technology was developed to address small dents and dings caused by hail on vehicles. Cars hit by hail often have bodies covered in dents, and without this technology, owners would have no choice but to opt for full bodywork and repainting. 2. Types of dents that cannot be repaired: The first type: Stretched metal dents. Metal has ductility, and if the deformation is too severe causing the metal to stretch, the dent cannot be repaired. The second type: Dents that tools cannot reach. The tools referred to here are specialized lifting tools for car dent repair. 3. Drawbacks of car dent repair: Car dent repair technology has no significant drawbacks; it simply restores the deformed area through physical means. Dents in the fender wheel arch area may require drilling holes, but not all vehicles need this procedure.
6
3
Share

What Do the 2 and L Gears Mean on an Automatic Transmission?

L stands for LOW, meaning low gear, which is the same as the numerical gear 1. Both are used to limit the gear to the lowest position to obtain high torque without shifting up. The number 2 represents limiting the gear between 1st and 2nd gears, which is useful for starting on slippery roads or moving slowly to restrict gear shifting. When driving on icy or snowy roads or in traffic jams, where the vehicle moves slowly, using D gear can cause the gear to fluctuate, increasing fuel consumption. Switching to L gear ensures the vehicle remains in 1st or 2nd gear, avoiding extra fuel consumption and wear on the vehicle. It is also suitable for uphill and downhill driving. In addition, automatic transmissions have other gears like P, R, N, D, S, and M. Here’s a detailed introduction: P (Parking) Gear: Used for long-term parking. It locks the vehicle's rotating parts mechanically by engaging the parking brake inside the transmission, securing the output shaft and applying the handbrake to prevent movement. R (Reverse) Gear: Used for reversing. Many models have a safety mechanism requiring the driver to press a button on the gear lever before shifting to R. N (Neutral) Gear: Similar to manual transmission neutral but not identical. N gear can be used when starting the engine, towing, or during temporary stops (e.g., at traffic lights). D (Drive) Gear: The most commonly used gear for normal driving conditions. S (Sport) Mode: In this mode, gears can shift freely, but the shift timing is delayed to keep the engine at higher RPMs for increased power. However, this mode increases fuel consumption. M (Manual) Gear: This is the manual mode for automatic transmission vehicles. In M gear, drivers can manually shift gears using the + and - symbols near the gear lever. The + symbol upshifts, while the - symbol downshifts.
9
4
Share

What are the functions of the center console buttons in the 2020 Mercedes-Benz GLA200?

The center console buttons of the Mercedes-Benz GLA200 are very comprehensive. Here is a detailed introduction: 1. Overview: The 2020 Mercedes-Benz GLA200 features a 10.25-inch center multimedia screen equipped with the MBUX system. The functions are clearly divided and can be operated via touch or handwriting pad, making it easy to use. The interior design might be the most attractive feature of the new GLA for young people, even though it has already appeared in the A-Class and GLB, it still sparks curiosity. 2. Functions: The full LCD instrument panel measures 10.25 inches, with very fine display effects and no noticeable glare under strong light, providing a great experience. The 64-color ambient lighting is highly playful, supporting dynamic multi-color modes. Different zones of the light strips can display different colors and continuously change.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.