Does modifying a car with one-button start have any impact?

What does the circle with an exclamation mark in a car mean?

Red exclamation mark (specifically a circle with an exclamation mark inside), this represents a warning for the braking system, mainly indicating a malfunction in the braking system or low brake fluid level. Solution: Immediate inspection and repair of the braking system are required to avoid accidents. Apart from the red exclamation mark representing braking system faults, all other exclamation marks in a car are yellow, indicating general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor faults, fuel cut-off system intervention or malfunction, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant below the normal range. Transmission fluid should be replaced promptly. Abnormal Tire Pressure: A horizontal line under a bracket with an exclamation mark in the middle. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, signaling a fault in one of the car's lights. Solution: Visit a 4S shop for inspection and repair as soon as possible. Alternatively, you can check yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the problem.

14

3

Share

Where is the fuel pump relay located in a Citroen Elysee?

In the Dongfeng Citroen Elysee, the fuel pump relay is situated beneath the hood, at the upper left corner of the engine. Upon opening the engine compartment cover, it can be found in the space between the battery and the radiator, housed in a brown bracket box where two relays are combined. Below is relevant information about the fuel pump relay: Symptoms of a faulty fuel pump relay: Starter fails to rotate: This can occur during vehicle startup due to power supply issues, starter malfunctions, faulty start relays, ignition switch problems, or short circuits in the system wiring. Starter operates weakly: When starting the car, the starter's rotation speed is noticeably low or may even stop. Starter spins freely: After engaging the start switch, only the starter rotates quickly without the engine crankshaft turning. This symptom indicates that the starter circuit is functional, with the fault lying in the starter's transmission device or the flywheel ring gear. Causes of fuel pump relay failure: Severe battery discharge or short circuit; Poor contact between the starter commutator and brushes. Open circuit, short circuit, grounding in the start relay coil, or poor contact at its terminals. Loose wiring or internal contact issues in the ignition switch. Open circuits, poor contact, or disconnection in the starting system wiring. The fuel pump relay operates by using a minimal current to control high-power circuits, expanding control range. When a signal reaches a certain threshold, it can switch, disconnect, or connect multiple circuits simultaneously based on the contact group configuration, achieving automatic switching purposes.

10

5

Share

What are the pros and cons of the PDK transmission?

PDK transmission has the advantages of fast shifting, high transmission efficiency, and low fuel consumption level; the disadvantage is the presence of low-speed jerking. Fast shifting: The characteristic of power shifting is that there are two sets of transmissions, one for controlling 1st, 3rd, and 5th gears, and the other for controlling 2nd, 4th, and 6th gears. When using first gear, second gear is already prepared, so the shifting time is greatly reduced with no delay. High transmission efficiency: The friction plates of the PDK transmission's dual clutch are rigidly connected, and the efficiency of the dual clutch is higher than that of a manual transmission because the transmission power is not interrupted during shifting, so the efficiency of torque transmission is also high. Low fuel consumption level: Because the transmission efficiency is improved, fuel consumption is also reduced. Low-speed jerking: In pursuit of the ultimate performance, the PDK transmission does not use a torque converter for buffering, and the rigid connection between the engine and the transmission also means that the PDK transmission has the defect of low-speed jerking.

2

0

Share

What is the Normal Range for Oil Pressure Gauge?

When the engine is running, the normal oil pressure gauge reading generally stays within the range of 150-350kPa. If the indicated pressure value is below 98kPa, it can be considered as low oil pressure, and the vehicle should be stopped immediately for inspection. Otherwise, it may lead to excessive wear of parts or even serious mechanical failures such as "bearing seizure." The causes of low oil pressure include the following: Insufficient Oil Level: If the oil level is insufficient, the oil pump's output will decrease, or it may fail to pump oil due to air intake, resulting in a drop in oil pressure. This can accelerate wear on components like the crankshaft, bearings, cylinder liners, and pistons due to poor lubrication. Engine Overheating: Excessive scale in the engine cooling system, poor heat dissipation, prolonged overloading, or delayed fuel injection timing can cause the engine to overheat. This accelerates oil degradation, thinning, and leakage through gaps, leading to reduced pressure. Oil Bypass Valve Malfunction: The oil bypass valve maintains normal oil pressure in the main oil gallery. If its pressure-regulating spring weakens, is improperly adjusted, or the valve seat and ball wear out or get stuck, preventing proper sealing, oil pressure will drop. Clogged Oil Filter: When the oil filter is clogged and cannot circulate oil, the bypass valve on its base opens, allowing unfiltered oil to enter the main oil gallery. If the bypass valve's opening pressure is set too high, it may not open promptly when the filter is clogged, causing increased oil pump pressure, internal leakage, and a subsequent drop in oil pressure.

18

4

Share

How Many Liters of Transmission Fluid Are Needed for a Single Replacement?

Transmission fluid replacement requires four to six liters for manual replacement (gravity method); approximately nine to twelve liters are needed when using a fluid exchange machine. Different vehicle models have varying replacement intervals. Below are the recommended replacement cycles for transmission fluid: Manual Transmission: Manual transmission fluid is generally recommended to be replaced every three years or approximately 100,000 kilometers. Automatic Transmission: Automatic transmission fluid is typically recommended for replacement every two years or around 40,000 kilometers. Continuously Variable Transmission (CVT): CVT fluid is usually advised to be replaced every two years or roughly 60,000 kilometers. The methods for replacing transmission fluid are as follows: Unscrew the drain plug at the bottom of the transmission to drain the old fluid before refilling. Remove the transmission oil pan directly to drain and refill the fluid: This method is more thorough than the previous one, as it allows for the removal of debris from the bottom of the oil pan. Using a circulation machine for automatic transmission fluid replacement: A smart circulation machine enables dynamic fluid exchange, filtering and cleaning sludge and impurities within the automatic transmission.

7

5

Share

How to reset BMW after power failure?

First, check the battery in the trunk to see if the root cause of the problem lies with the battery. If there is an issue, replace the battery. Check if there are any problems with the fuse box socket and wiring harness connector in the glove compartment on the passenger side. It may be due to incorrect contact between the pins on the fuse box socket and the internal circuit of the fuse box.

19

4

Share

Does modifying a car with one-button start have any impact?

What does the circle with an exclamation mark in a car mean?

Where is the fuel pump relay located in a Citroen Elysee?

What are the pros and cons of the PDK transmission?

What is the Normal Range for Oil Pressure Gauge?

How Many Liters of Transmission Fluid Are Needed for a Single Replacement?

How to reset BMW after power failure?

How to Check Tire Wear Condition?

Where is the engine speed sensor located?

Do You Need to Wait for the Traffic Light When Making a U-Turn?

What Are the Main Classifications of Car Sunroofs?