Does mixing 92 and 95 octane gasoline have any impact on cars?

1 Answers
DelJackson
07/30/25 8:48am
Mixing 92 and 95 octane gasoline occasionally has no impact, but try to avoid long-term mixing as their fundamental difference lies in the octane value, which represents anti-knock performance. The following are the hazards of mixing gasoline: If 92 and 95 octane gasoline are mixed for a long time, the high anti-knock function of 95 octane gasoline will not be fully utilized, and delayed combustion may occur. The ultimate consequence of this phenomenon is incomplete combustion, leading to increased carbon deposits in the engine. This has adverse effects on the normal operation and durability of the car engine, as it may cause the pressure in the engine cylinders to fail to meet the combustion requirements of the air-fuel mixture, leading to knocking. The engine may exhibit symptoms such as weak power output, increased fuel consumption, and other adverse effects. It may also shorten the lifespan of the car's ignition system, fuel injectors, and spark plugs, and increase exhaust pollution. The reason why different fuel grades are recommended for cars is that different vehicle engines have different compression ratios. Higher octane gasoline is not necessarily better; the appropriate gasoline grade should be selected based on the engine's compression ratio.
Was this review help?
19
1
Share
More Forum Discussions

What does it mean to schedule three sessions for Subject 1?

What does it mean to schedule three sessions for Subject 1? It means you can choose three different time slots or locations, but you can only book one of them. Here are the relevant details: 1. Subject 1: Subject 1, also known as the theoretical test for drivers, is part of the motor vehicle driver's license examination. According to the 'Motor Vehicle Driver's License and Application Rules,' the test covers driving theory basics, road safety laws and regulations, local regulations, and related knowledge. 2. Test format: The test is computer-based, consisting of 100 questions, with a passing score of 90 or above.
2
0
Share

Why does the Cruze's fan start running immediately upon ignition?

The reasons why the Cruze's fan starts running immediately upon ignition are as follows: The air conditioning was not turned off: There is no issue with the car's cooling system; it's just that the air conditioning was not turned off during the last shutdown. When the car is started again, the air conditioning operates, causing the fan to run to facilitate the condenser's operation. A malfunctioning water temperature sensor: This leads to the engine's computer failing to detect the water temperature signal, causing the engine to enter a fault mode. Fault mode refers to an emergency state of the engine itself, where when an important sensor or component signal is missing, the engine's computer ensures the engine can continue to operate by working according to a preset mode.
1
3
Share

Does the 2018 Highlander meet China VI emission standards?

The 2018 Highlander does not meet China VI emission standards. China VI refers to the sixth-stage emission standard. The dimensions of the 2018 Highlander are: length 4890mm, width 1925mm, height 1720mm, with a wheelbase of 2790mm, front track of 1635mm, rear track of 1630mm, and a fuel tank capacity of 72.5 liters. The 2018 Highlander features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 220PS, maximum torque of 350Nm, and maximum power of 162kW, paired with a 6-speed automatic transmission.
6
2
Share

How to Clean Engine Sludge?

Engine sludge can be cleaned by adding a sludge cleaner into the engine through the oil filler cap before an oil change. Start the engine and let it idle for 5 to 10 minutes, then turn off the engine and drain the sludge cleaner along with the old oil. The functions of an engine include: 1. Fully burning the fuel injected into the cylinders to generate power; 2. Determining the vehicle's power, fuel efficiency, stability, and environmental performance. Methods for engine maintenance include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning the radiator scale; 4. Regularly removing engine carbon deposits; 5. Regularly replacing the three automotive filters; 6. Maintaining a reasonable engine speed.
5
4
Share

What are the effects of carbon deposits in the fuel tank?

Here are the impacts of carbon deposits in the fuel tank: 1. Reduced power performance: Carbon deposits and sediments can clog the injector needle valve and valve holes, affecting the performance of precision components in the injection system, leading to poor fuel injection, inadequate atomization, and reduced power performance. 2. Increased fuel consumption: Carbon deposits and sediments can cause the intake valve to close improperly, reducing cylinder pressure or even causing backfire, resulting in unstable engine idling, increased fuel consumption, and worsened exhaust emissions. 3. Shortened engine lifespan: Carbon deposits on the piston top and cylinder head can easily cause localized overheating in the combustion chamber and gasoline pre-ignition, leading to engine knocking and other faults, all of which can shorten the engine's lifespan.
9
5
Share

What is the ground clearance of the BMW X1?

BMW X1 has a ground clearance of 170mm. Here is relevant information: Exterior: BMW SUV products feature increasingly unique design styles in both appearance and configuration. The dimensions of the BMW X1 are 4454×1798×1545mm. As an SUV model, its interior space meets standards, with a luggage compartment volume ranging from 420 to 1350 liters. The multi-line styling of the car's exterior showcases the imposing presence of BMW's compact SUV. Powertrain: Equipped with 2.0L and 3.0L L4 or L6 engines, BMW, as a luxury car brand, holds a significant position in the SUV segment.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.