Does Lexus Offer Lifetime Free Maintenance?

Should You Press the Brake or the Clutch First When Braking?

Whether to press the brake or the clutch first when braking depends on two scenarios: 1. If the vehicle is moving at a higher speed and encounters an emergency situation requiring an immediate stop, you should first press the brake to slow down the vehicle before pressing the clutch to avoid engine stalling; 2. If you intend to stop or the vehicle is moving at a very slow speed, you should press the clutch first and then the brake. The car clutch serves to disconnect the engine from the transmission gears. Pressing the clutch means losing power, effectively putting the transmission in neutral, causing the car to coast forward without braking. The brake works by pressing the brake pads against the brake disc to slow down, operating on the same principle as bicycle brakes.

20

5

Share

Where is the Roewe i5 engine model located?

The Roewe i5 engine model is located above the left and right shock absorbers in the engine compartment. Taking the 2020 Roewe i5 as an example, it is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 169PS, a maximum power of 124kW, a maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission. The 2020 Roewe i5 is a compact car with body dimensions of: length 4601mm, width 1818mm, height 1489mm, a wheelbase of 2680mm, a fuel tank capacity of 45L, a trunk capacity of 512L, and a curb weight of 1270kg.

9

1

Share

What are the functions of the Delong M3000S?

Below are the functions of the Delong M3000S: High-beam technology: The smoked LED headlights feature a separate high/low beam design, with a semi-surrounding LED light strip integrating daytime running lights and turn signals. The LED headlights have a color temperature of 6000K and a lifespan exceeding 50,000 hours, which is 60 times longer than halogen lamps. Radar technology: The millimeter-wave radar in the center of the front bumper enables intelligent warning functions such as front collision and pedestrian collision, meeting the latest regulatory requirements. Three-step pedal: The M3000S adopts a three-step boarding pedal. The serrated and hollow design of the smoked pedal helps remove mud from the driver's shoes, perfectly matching the gravel transport conditions frequently encountered by this model.

11

0

Share

At what age can one sit in the front seat of a car?

14 years old or above is the required age to sit in the front seat of a car. The state has clearly stipulated that minors under the age of 12 are not allowed to sit in the front passenger seat. Although the front passenger seat offers a broad view and less vibration, it also poses significant hazards. Even parents holding children are not permitted to sit in the front passenger seat, and child seats cannot be installed there. If a passenger in the front seat is not wearing a seatbelt while driving on highways or urban expressways, they may be fined and required to correct the behavior if caught by electronic surveillance or on-site enforcement. On roads with speed limits below 50 km/h outside highways and urban expressways, failure to wear a seatbelt will result in a verbal warning and a request for correction, without penalty points or fines.

11

0

Share

What Causes Abnormal Noise in the Scooter Transmission Box?

Here are the specific reasons for abnormal noise in the scooter transmission box: 1. The noise only occurs at idle or low speed: Possible causes include excessive clearance between the piston and cylinder wall; overly tight piston pin or connecting rod bearing assembly; excessive clearance between the tappet and its guide hole; wear on the cam profile of the valve train; or a loose starter clutch causing pulley noise, which becomes noticeable when the speed changes. 2. The noise becomes chaotic at a certain speed, with brief sounds occurring during rapid deceleration: Possible causes include a cracked camshaft timing gear or loose fixing nut; broken crankshaft; loose piston pin bushing; excessive axial clearance of the camshaft or loose bushing. 3. The noise appears during rapid acceleration and persists at high speed: Possible causes include loose connecting rod bearings, melted or mismatched bearing shells causing rotation; loose crankshaft bearings or melted bearing shells; broken piston pin; or broken crankshaft.

20

2

Share

Can a National III Motorcycle Be Licensed Through Unauthorized Agents?

Motorcycles meeting National III emission standards cannot be licensed through unauthorized agents. Meaning: The higher the subsequent number, the more environmentally friendly the vehicle's emissions, indicating a later release date and stricter energy-saving and emission-reduction requirements for the vehicle. Pollution: National I has the highest pollution levels, while National VI has the lowest, generally categorized by year. Engine: The main difference between National V and National VI vehicles lies in the use of more efficient three-way catalytic converters in National VI vehicles, enabling the engine's emissions to meet National VI standards. Upgraded Version: The National VI emission standard is an upgraded version of the current National V standard, imposing more stringent and scientifically based requirements on vehicle tailpipe emissions.

4

5

Share

Does Lexus Offer Lifetime Free Maintenance?

Should You Press the Brake or the Clutch First When Braking?

Where is the Roewe i5 engine model located?

What are the functions of the Delong M3000S?

At what age can one sit in the front seat of a car?

What Causes Abnormal Noise in the Scooter Transmission Box?

Can a National III Motorcycle Be Licensed Through Unauthorized Agents?

What is the treatment method for minor scratches on black cars?

How to adjust the height of the Emgrand GL seat?

When is the maintenance time for the Golf?

Are Carbon Fiber Cars Impact-Resistant?