Does leaving a car running for a whole day cause damage?

Why does the Honda CR-V engine shake when warm?

Honda CR-V engine shaking when warm is caused by ignition system issues and unstable oil pressure. Below are the reasons and solutions for Honda CR-V engine shaking. Severe engine carbon buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon deposits on the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the engine will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, making the air-fuel mixture too rich. This fluctuation between lean and rich mixtures causes idle shaking after a cold start. Aging engine components: Car shaking can also be related to worn engine mounts. Engine mounts act as the engine's shock absorption system, responsible for absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations will transfer to the steering wheel and the cabin, causing shaking at idle.

10

1

Share

What is the operating method for the flagship 600 horsepower gear?

Flagship 600 has different handling characteristics, engine power, and transmission gears. The rear axle differentiation for the flagship 600 horsepower: the difference between the 3.42 and 3.64 ratios lies in handling characteristics, engine power, and transmission gears. With the same engine, the 3.64 ratio allows for faster speed. In vehicles, the ratio equals engine speed/drive wheel speed, also equals drive wheel torque/engine torque, and further equals the transmission gear ratio multiplied by the final drive ratio. The larger the ratio, the faster the speed. The gear shifting process during driving: during the starting phase, put the gear into neutral, depress the clutch, turn on the ignition switch, engage first gear, slowly release the clutch while coordinating with the throttle to start the car. During the acceleration process after the car starts, as the engine speed increases, engage the corresponding gear according to different speeds. Note: usually, when the speed increases to a certain level, the engine will produce abnormal noise, at which point you must shift up.

14

5

Share

How to Understand Parallel Imports?

Parallel imported vehicles refer to cars imported directly from the product's country of origin by importers other than the domestic general distributor. Parallel imports can be understood as a form of purchasing on behalf, as opposed to regular imported vehicles. In other words, imported cars are divided into two types: parallel imports and regular imported vehicles. Regular imported vehicles, commonly referred to as China-spec cars, are those purchased through 4S dealerships. Below are the differences between parallel imported vehicles and regular imported vehicles: 1. Parallel imported vehicles are cheaper. Since they bypass the general distributor and eliminate middlemen, their prices are naturally much lower, typically by about 10%~20%. 2. Parallel imported vehicles offer more model choices. They include models not available through domestic production or regular imports. Depending on the import region, they are further categorized as "U.S.-spec cars," "Euro-spec cars," etc., all of which are authentic. 3. In terms of subsequent usage and after-sales services, regular imported vehicles are better than parallel imports. Regular imported vehicles come with a three-guarantee policy from 4S dealerships, while parallel imports do not, and owners need to purchase insurance separately.

13

3

Share

What Causes the Rattling Noise in the Front Passenger Seat of a BMW 3 Series?

BMW 3 Series front passenger seat rattling noise is caused by insufficient lubrication of the front passenger door's door check strap. Below are the specific reasons and methods for inspection: Specific causes of the rattling noise: The front passenger door's door check strap lacks lubrication, the sealing strips on the front passenger door and the body have become deformed, there are foreign objects inside the glove compartment in front of the front passenger seat, and friction occurs between the center console in front of the front passenger seat and the windshield. Methods to check the source of the rattling noise: To identify the source of the rattling noise, first determine whether the noise occurs when the vehicle is driven on all road sections. If this is the case, you can inspect the vehicle's wheels, the underbody panels, and the window glass, as these areas are common sources of rattling noises. Then, use a process of elimination to inspect and rule out each potential source one by one. Once the specific fault is identified, address it accordingly to prevent the rattling noise from recurring during future use.

20

3

Share

What to Do When a Car Burns Engine Oil?

Solutions for engine oil burning: repair the engine, clean carbon deposits inside the engine, and replace damaged components. If the situation is severe, an engine overhaul may be required. The reasons for engine oil burning are as follows: 1. Poor valve sealing: Valves prevent oil from leaking into the combustion chamber, but over time, wear and aging can cause poor sealing, allowing oil to enter the combustion chamber more easily. 2. Increased piston clearance: Long-term operation leads to carbon buildup and wear in the piston area. Over time, the piston clearance increases, making it easier for oil to enter the combustion chamber. This is why it's often recommended to use higher-viscosity oil in older vehicles. 3. Low oil viscosity: Using oil with too low viscosity can also cause oil burning. Low-viscosity oil flows more easily and can seep into the cylinder, participating in combustion. 4. Excessive oil volume: High oil pressure can force some oil into the cylinder, resulting in oil burning.

9

0

Share

Is the Panamera a Full-Time Four-Wheel Drive Vehicle?

The Porsche Panamera is a full-time four-wheel drive vehicle. Introduction to Full-Time Four-Wheel Drive: Full-time four-wheel drive refers to a vehicle maintaining four-wheel drive throughout the entire driving process, with the engine's output torque distributed to the front and rear wheels in a fixed proportion. This drive mode ensures excellent off-road and handling performance at all times, but it cannot adjust torque distribution based on road conditions and has higher fuel consumption. In contrast, real-time four-wheel drive is controlled by a computer chip to switch between two-wheel drive and four-wheel drive. On normal road surfaces, the vehicle operates in two-wheel drive mode. When encountering off-road conditions or wheel slippage, the computer detects and automatically distributes power to the other two wheels. Basic components of full-time four-wheel drive include: a planetary gear-type inter-axle differential with fixed torque distribution and an additional viscous clutch, an electromagnetic clutch that automatically locks when speeds differ (electronically controlled), an electronically controlled multi-plate clutch (Haldax clutch), a viscous clutch in the driveshaft power transmission line, and the selection of the initially non-driven axle based on tire slippage.

17

2

Share

Does leaving a car running for a whole day cause damage?

Why does the Honda CR-V engine shake when warm?

What is the operating method for the flagship 600 horsepower gear?

How to Understand Parallel Imports?

What Causes the Rattling Noise in the Front Passenger Seat of a BMW 3 Series?

What to Do When a Car Burns Engine Oil?

Is the Panamera a Full-Time Four-Wheel Drive Vehicle?

Is the Mercedes-Benz steering wheel heavy?

What is the tire size of the Haval H2?

What is the model of the Elantra battery?

What engine does the Changhe Q7 have?