Does Jetta belong to SAIC Volkswagen or FAW-Volkswagen?

What Does Exeed Mean?

Exeed is a premium brand under Chery Automobile Co., Ltd. The name Exeed originates from 'EXCEED', where 'Ex' represents the starry sky, an unknown realm always yearning to be explored, and 'eed' symbolizes the journey, a continuous process of surpassing. Introduction to Exeed: 1. Design: Guided by Kevin Rice, Deputy Design Director and Global Chief Designer, it adopts a simple and pure design style to express the intelligent and premium brand essence of Exeed. 2. Driving and Control: Equipped with a new-generation 1.6TGDI engine delivering 145KW of power and 290Nm of torque, a highly efficient 7-speed dual-clutch transmission, a reliable and safe chassis system meticulously crafted by Benteler, and BorgWarner's intelligent all-wheel-drive system. 3. Safety: Features 11 advanced ADAS driver assistance systems leading in its class and the new-generation BOSCH 9.3 electronic stability control system.

5

0

Share

What is the general speed limit on national highways?

The speed limit on national highways is 60 to 80 kilometers per hour. Moreover, there are no traffic lights, the roads are wide, and they can save almost half the time. For a 400-kilometer journey, it may take just over four hours to reach the destination, whereas on national highways, it might take 6 to 7 hours. Domestic expressways generally have a speed limit of 120 kilometers per hour. National highways refer to main trunk roads with national political and economic significance, including important international highways, defense roads, roads connecting the capital with provincial, autonomous region, and municipal capitals, and roads linking major economic centers, port hubs, commodity production bases, and strategic locations. Rural roads generally belong to Class 3 highways. If there are no speed limit signs, the speed is usually not allowed to exceed 70 kilometers per hour. If there are speed limit signs, drivers should follow the indicated speed. Village sections, also known as rural roads, typically lack a central dividing line and are very narrow, with a general speed limit of 40 km/h. Some rural roads may not even accommodate two oncoming vehicles passing smoothly.

9

0

Share

What does repairing brake pads mean?

Repairing brake pads refers to the need for maintenance when a vehicle's brake pads are worn out, to ensure the proper operation of the vehicle. Below is relevant information about automotive brake pads: 1. Performance: Automotive brake pads, also known as brake linings, are friction materials fixed to the brake drum or brake disc that rotates with the wheel. The friction linings and blocks bear external pressure to generate friction, thereby achieving the purpose of decelerating the vehicle. 2. Structure: Automotive brake pads are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure the temperature distribution during coating meets quality standards. 3. Braking Principle: The working principle of automotive brake pads mainly relies on friction. By utilizing the friction between the brake pads and the brake disc (or drum), as well as between the tires and the ground, the kinetic energy of the moving vehicle is converted into heat energy through friction, bringing the vehicle to a stop.

5

0

Share

Should the accelerator and brake be operated with one foot or two feet?

The accelerator and brake should be operated with one foot. Here are the specific reasons for using one foot to control both the accelerator and brake: 1. Functional reasons: The main function of the accelerator is to speed up and maintain speed, while the brake is primarily used to slow down. These two functions are contradictory. If you want to accelerate, you must not press the brake, and if you want to decelerate, you must not press the accelerator. Therefore, the control of the accelerator and brake should be done sequentially rather than simultaneously. Using one foot to control both the accelerator and brake better meets this requirement and reduces the likelihood of incorrect operation. 2. Safety reasons: Using one foot to control both the accelerator and brake not only prevents incorrect operations but also makes driving more relaxed and natural. The right foot controls the accelerator and brake, while the left foot remains in a resting state, making the driver less prone to fatigue. If one foot operates the accelerator and the other operates the brake, it can easily lead to driver fatigue.

19

1

Share

Can a Three-Cylinder Engine Be Replaced with a Four-Cylinder Engine?

Theoretically, a three-cylinder engine can be modified into a four-cylinder engine. The differences between a three-cylinder engine and a four-cylinder engine are as follows: Different in Size and Weight: A three-cylinder engine is relatively small and light, saving space in the car and facilitating vehicle layout. A four-cylinder engine is heavier and larger in size. Different in Fuel Consumption: A three-cylinder engine has a smaller displacement and is more fuel-efficient. A four-cylinder engine has one more cylinder than a three-cylinder engine, making it relatively more fuel-consuming. Different in Power: The torque platform of a turbocharged three-cylinder engine is relatively narrow, making it prone to insufficient power. A four-cylinder engine has relatively more sufficient power. Different in Cost: The structural design of a three-cylinder engine is simpler, with relatively lower production costs, and maintenance and repairs are also cheaper. The production cost of a four-cylinder engine is higher.

20

2

Share

How to Remove Odors in a New Car?

Place activated charcoal in the car. Activated charcoal has a strong ability to adsorb toxic gases. When harmful gases in the air come into contact with activated charcoal, they are adsorbed onto it, thereby purifying the air inside the car. Whether it's a new or old car, it is recommended to keep activated charcoal in the vehicle long-term. Regularly use photocatalyst. Photocatalyst is a new odor-removal technology that involves spraying nano-sized photocatalytic semiconductor materials onto the surfaces of interior materials. Under light, it produces a strong catalytic degradation effect, effectively breaking down harmful gases in the car, removing formaldehyde, and providing antibacterial and disinfecting benefits. Use a car air purifier. Car air purifiers are compact and lightweight, allowing them to be placed in corners of the car. They effectively purify the air inside the vehicle and eliminate formaldehyde odors, making them one of the most effective methods for removing odors in cars today. Avoid exposing the interior to direct sunlight. Why does the odor become stronger when exposed to the sun? It turns out that direct sunlight causes the car's interior materials to release more toxic gases, and higher temperatures also cause toxic substances sealed in unseen areas to volatilize. Therefore, it's best to avoid parking the car under direct sunlight whenever possible. Try to park in underground parking lots or shaded areas and apply reflective window film to the car.

16

4

Share

Does Jetta belong to SAIC Volkswagen or FAW-Volkswagen?

What Does Exeed Mean?

What is the general speed limit on national highways?

What does repairing brake pads mean?

Should the accelerator and brake be operated with one foot or two feet?

Can a Three-Cylinder Engine Be Replaced with a Four-Cylinder Engine?

How to Remove Odors in a New Car?

Will the Passenger Seat Be Captured for Not Wearing a Seat Belt?

What Causes the Front Hood of a Car to Get Hot?

What is the maximum speed limit when driving downhill?

What is the displacement of 2.5g?