Does Iron Rust Remover Affect Car Paint?

What should be noted for safe driving in summer?

Here are the precautions for safe driving in summer: Check tire pressure before traveling: When driving long distances, it is best to inflate the tires according to the recommended tire pressure. Never set the tire pressure too high, as the road temperature is already high, and prolonged friction between the tires and the ground will cause the tire pressure to rise continuously. Excessive tire pressure can easily lead to a blowout. If the car does not have a tire pressure monitoring system, you can purchase one at an auto parts store to monitor the tire pressure at all times and ensure it remains normal. Ventilate the car by opening windows before entering: Due to the low boiling point of formaldehyde, its release rate in high temperatures can be 20-30% higher than usual. Therefore, a car that has been exposed to intense sunlight will have significantly increased formaldehyde levels. Opening the windows for ventilation first can help avoid inhaling carcinogenic gases like formaldehyde and benzene. Avoid driving for too long in high temperatures: Generally, in the high temperatures of summer, it is best not to drive on highways for more than 3 hours at a time. This is because daytime driving in summer often involves ambient temperatures above 35°C, with road surface temperatures reaching at least 60°C. The heat radiating from the ground creates a heat wave around the engine, affecting its cooling performance. Never drive in sandals: Some people prefer the coolness and breathability of sandals, but driving in them is dangerous and constitutes a traffic violation. Sunglasses should not be too dark: While sunglasses can block sunlight and protect the eyes, they can also impair vision. For example, when entering a tunnel, the sudden dimming of light can make it harder to see the road with dark sunglasses, delaying the driver's reaction time to emergencies and potentially leading to incorrect judgments. Beware of drowsy driving: The summer heat and poor air circulation can easily cause driver fatigue, leading to drowsiness, blurred vision, and slowed thinking, all of which can result in traffic accidents. When driving in hot summer weather, try to maintain a well-ventilated cabin with suitable temperature and humidity. If you feel tired, pull over and rest immediately instead of forcing yourself to continue driving.

8

4

Share

Is the Geely Icon part of the Emgrand series?

Geely Icon belongs to the Emgrand series, but its design philosophy, including aspects such as exterior and interior, differs significantly from the Emgrand series. Icon's design philosophy: The Geely ICON adopts a futuristic design style, achieving a 90% restoration of the concept car CONCEPT-ICON. It uses technology to define design syntax, integrating three core design elements—"time symbols," "rounded rectangles," and "star cluster patterns"—throughout the vehicle's styling. The side profile of the Geely ICON features an inward concave waistline design, which echoes the shoulder lines running across the front face and the lines extending to the rear, collectively shaping a full and robust side profile, making the ICON's overall appearance more minimalist and cohesive. Emgrand's design philosophy: Emgrand advocates for "excellence, stability, and prestige" as its brand proposition, representing Geely's development direction in safety, energy efficiency, and environmental protection. The front face adopts the family-style water ripple grille, paired with a black-and-blue logo, creating a very harmonious look. On either side are sharp LED headlight clusters, and the body lines are smooth and powerful, delivering a dynamic and elegant driving experience.

2

5

Share

Is there a subsidy for vehicle scrapping?

There are subsidies for car scrapping, and the subsidy standards are as follows: 1. Scrapping heavy-duty trucks: a subsidy of 18,000 yuan per vehicle. 2. Scrapping medium-duty trucks: a subsidy of 13,000 yuan per vehicle. 3. Scrapping light-duty trucks: a subsidy of 9,000 yuan per vehicle. 4. Scrapping mini trucks: a subsidy of 6,000 yuan per vehicle. 5. Scrapping large buses: a subsidy of 18,000 yuan per vehicle. 6. Scrapping medium buses: a subsidy of 11,000 yuan per vehicle. 7. Scrapping small buses (excluding sedans): a subsidy of 7,000 yuan per vehicle. 8. Scrapping mini buses (excluding sedans): a subsidy of 5,000 yuan per vehicle. 9. Scrapping sedans with a displacement of 1.35 liters and above: a subsidy of 18,000 yuan per vehicle. 10. Scrapping sedans with a displacement between 1 liter (excluding) and 1.35 liters (excluding): a subsidy of 10,000 yuan per vehicle. 11. Scrapping sedans with a displacement below 1 liter and special-purpose vehicles: a subsidy of 6,000 yuan per vehicle.

12

0

Share

What Causes the Steering Wheel of Volvo S90 to Make Abnormal Noises When Turning?

Abnormal noises when turning the steering wheel may include sounds from the turn signal reset, noises from the steering column dust cover, sounds emanating from within the steering wheel, noises from the shock absorber plane bearing, or sounds from the stabilizer bar. Here are the specific details: 1. Sounds from the turn signal reset: If the turn signal is activated while turning, the noise might be from the rebound clip of the automatic turn signal reset mechanism. This situation requires confirmation. If it is indeed the case, then this is a normal occurrence. 2. Noises from the steering column dust cover: If the noise comes from below the steering wheel, it might be from the steering column dust cover. Due to insufficient lubrication of the dust cover, friction sounds can occur. In this case, applying some grease inside the dust cover will eliminate the noise. 3. Noises emanating from within the steering wheel If the noise comes from inside the steering wheel, the issue is most likely caused by the airbag clock spring inside. Remove the steering wheel airbag clock spring and apply some grease to see if the noise persists. If it still occurs, replace the airbag clock spring as it may be damaged. Be gentle when removing the steering wheel, or disconnect the airbag fuse to prevent the airbag from deploying. 4. Noises from the shock absorber plane bearing: If the noise originates outside the vehicle, it might be due to insufficient lubrication of the shock absorber plane bearing. Open the hood and listen to see if the noise is coming from the shock absorber top mount. This will confirm if the noise is from the plane bearing. Applying grease to the plane bearing may help. If the noise persists after greasing, replacement is necessary. 5. Noises from the stabilizer bar: If the noise is not from the shock absorber, check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noises not only when turning the steering wheel but also when driving over uneven roads. Loose bushings can be fixed by adding shims, but damaged ones must be replaced.

5

2

Share

How long can a truck's annual inspection be overdue?

Truck annual inspections cannot be overdue by more than 30 days. Vehicles must undergo annual inspections once per year. For vehicles over 10 years old, inspections are required every 6 months. Small and micro non-operating passenger vehicles require inspections every 2 years within the first 6 years, then annually after 6 years, and every 6 months after 15 years. If a motor vehicle fails to obtain an inspection compliance mark for 3 consecutive inspection cycles after the expiration of its valid inspection period, it will be mandatorily scrapped. The required documents and procedures for vehicle annual inspection are as follows: 1. Required materials: Original "Motor Vehicle License Plate Application Form": (Signed by the authorized person for company vehicles, or by the owner for private vehicles). Motor vehicle compulsory traffic accident liability insurance certificate; 2. Copy of vehicle and vessel tax payment or tax exemption certificate: If tax payment information is noted on the compulsory traffic accident liability insurance certificate, provide the insurance certificate; 3. Original motor vehicle safety technical inspection compliance certificate: Original "Motor Vehicle Registration Certificate". For entrusted issuance of inspection compliance marks, also provide the original "Notice of Entrusted Issuance of Inspection Compliance Mark"; 4. Proxy registration: Additionally provide the agent's identity proof and the original legally effective written power of attorney issued by the vehicle owner.

15

3

Share

How to Connect a Phone to an Old Car Without Bluetooth?

Use a receiver, select a vent clip and car mount, position it properly, plug the USB interface into the car's AUX and USB ports, then turn on Bluetooth. Alternatively, you can connect using an audio cable to the car's sound system, allowing you to play music via your phone's Bluetooth connection.

4

Share

Does Iron Rust Remover Affect Car Paint?

What should be noted for safe driving in summer?

Is the Geely Icon part of the Emgrand series?

Is there a subsidy for vehicle scrapping?

What Causes the Steering Wheel of Volvo S90 to Make Abnormal Noises When Turning?

How long can a truck's annual inspection be overdue?

How to Connect a Phone to an Old Car Without Bluetooth?

What Causes the Car Air Conditioner Blower to Stop Working?

What is the length of the Sharan?

How to Turn Off a Mercedes-Benz?

Where is the complete engine number located?