Does Installing a Secondary Brake Affect a New Car?

1 Answers
DelJordan
07/29/25 11:43pm
Installing a secondary brake in a new car has negative effects, as it can deprive the driver of autonomy and compromise safety. Loss of Autonomy: Novice drivers lack anticipatory judgment. Upon hearing an emergency command, they might panic and mistake the accelerator for the brake. Even with the assistance of a secondary brake, prolonged use can lead to dependency. While this may resolve immediate crises, it fails to foster independent decision-making. The novice driver remains like a puppet, struggling to grow quickly. Safety Risks: A basic secondary brake functions similarly to a bicycle handbrake. If pressed too hard or too frequently, it may fail to return fully or at all. Driving under such conditions is akin to pressing both the brake and accelerator simultaneously—dragging the brakes while driving. Within a short time, a burning smell may emerge, and the brake pads could quickly wear out.
Was this review help?
4
4
Share
More Forum Discussions

How to Check the National Emission Standard of a Vehicle?

Methods to check the national emission standard of a vehicle are: 1. Check the vehicle's environmental protection label; 2. Look at the vehicle's factory certificate or vehicle conformity certificate; 3. Log in to the Motor Vehicle Environmental Protection Public Inquiry Platform to check; 4. Differentiate based on the vehicle's manufacturing year. Vehicle emissions refer to harmful gases discharged from exhaust, including carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot. Vehicle emission standards are categorized into: 1. Vehicles with a total mass less than or equal to 3.5 tons equipped with spark-ignition or compression-ignition engines; 2. Vehicles with a total mass greater than 3.5 tons equipped with spark-ignition engines; 3. Vehicles with a total mass greater than 3.5 tons equipped with compression-ignition engines.
17
4
Share

How many liters of engine oil does the Arrizo 5 require?

Arrizo 5 requires approximately 4 liters of engine oil. Engine oil, as a lubricant for the engine, serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing to prevent leaks, rust and corrosion protection, as well as shock absorption. The Arrizo 5 is a compact 4-door, 5-seater sedan with body dimensions of 4572mm in length, 1825mm in width, and 1482mm in height, featuring a wheelbase of 2670mm. It is equipped with a 1.6L naturally aspirated engine paired with a 5-speed manual transmission, delivering a maximum power of 66 kilowatts and a maximum torque of 130 Newton-meters. The vehicle adopts a front-engine, front-wheel-drive layout, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
11
5
Share

What to Do When the Car Sunroof Won't Open?

Methods to address a car sunroof that won't open are: 1. Check the sunroof switch; 2. Inspect whether the sunroof frame is damaged; 3. Verify if the sunroof motor is functioning. Reasons for a car sunroof not opening include: 1. Sunroof wiring malfunction; 2. Damage to the sunroof drive motor; 3. Severe lack of lubrication in the sunroof track; 4. Presence of foreign objects in the sunroof groove. Car sunroofs are categorized into built-in sunroofs, pop-up sunroofs, and panoramic sunroofs. Maintenance methods include: 1. Promptly clean the sunroof drainage channel and regularly wipe the sunroof guide rails with a damp sponge; 2. Apply silicone oil to the sunroof sealing strip after washing the car.
5
1
Share

How to Remove the Santana Radio?

The method to remove the Santana radio is: 1. Remove the frame on the panel; 2. Unscrew the mounting screws located towards the rear on both sides of the radio; 3. Take out the radio and disconnect the rear wiring and antenna. The Santana is a compact 4-door 5-seater sedan with body dimensions of 4475mm in length, 1706mm in width, 1469mm in height, and a wheelbase of 2603mm. It is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 82 kW and a maximum torque of 145 Nm. The drivetrain is front-wheel drive, with a MacPherson strut front suspension and a compound torsion beam rear suspension.
15
4
Share

Which gear should an automatic transmission car be in during traffic jams?

During traffic jams, an automatic transmission car should be in D (Drive) gear. Automatic transmissions do not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The gears of an automatic transmission are as follows: 1. P (Park) is the parking and starting gear; 2. R (Reverse) is the reverse gear; 3. N (Neutral) is the neutral gear; 4. D (Drive) is the forward gear, also known as the driving gear; 5. L (Low) is the low gear; 6. S (Sport) is the sport mode; 7. OD (Overdrive) is the overdrive gear. The starting steps for an automatic transmission are: 1. Press the start button twice in succession, and the car's computer system will enter self-check mode; 2. Press the foot brake and press the start/stop button to ignite; 3. Release the foot brake to begin warming up the car in place; 4. Press the foot brake and release the handbrake, then shift the gear from P to D; 5. Slowly release the foot brake to start moving; 6. Press the accelerator smoothly according to road conditions to drive safely.
8
0
Share

Does Rolls-Royce have an SUV?

Rolls-Royce does have an SUV, which is the Cullinan. The Cullinan is a large 5-door, 5-seat SUV with body dimensions of: length 5341mm, width 2000mm, height 1837mm, and a wheelbase of 3295mm. It features a front-engine, four-wheel-drive layout and is equipped with double-wishbone independent suspension both at the front and rear. The Cullinan is powered by a 6.7T twin-turbocharged engine paired with an 8-speed automatic transmission, delivering a maximum power of 441 kW at 5000 rpm and a peak torque of 900 N·m at 1600 rpm.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.