Does idling with the AC on in summer affect the car?

1 Answers
LeRachel
07/30/25 12:00am
First, idling with the AC on increases fuel consumption, and idling in place with the AC on may harm the occupants while also increasing carbon buildup. Because exhaust contains many harmful substances, the most dangerous to humans is carbon monoxide, a product of incomplete combustion, which is unavoidable. Carbon monoxide is produced the most when the vehicle is idling, and at this time, turning on the AC in place can easily draw it into the car, causing harm to the occupants. Additionally, for the car, idling with the AC on for too long places a heavy load on the engine, leading to a sharp increase in carbon buildup. Over time, excessive carbon buildup can affect various aspects of the car. Correct AC usage in summer: First, after getting in the car, open the windows. After the car has been exposed to the sun, it is essential to ventilate, as many materials inside the car can produce pungent and sometimes toxic gases under high temperatures. Then, turn on the fan to blow away the contaminated air in the AC system and also to expel the hot air from the system. Turn on the AC, use natural air for a few minutes first, then switch to cooling. After cooling for one or two minutes, close the windows.
Was this review help?
5
1
Share
More Forum Discussions

What are the reasons for a car's steering wheel not being straight when driving in a straight line?

Car straight driving steering wheel is not straight reasons are: 1, the steering wheel is crooked, when driving and letting go of the steering wheel, there will be no deviation phenomenon, this is simply a crooked steering wheel, it may be that the steering wheel and steering column have undergone relative rotational displacement; 2, letting go of the steering wheel the vehicle will deviate, this belongs to the car deviation, not the steering wheel's problem, four-wheel alignment and car dynamic balance need to be done; 3, steering gear failure; 4, the vehicle's lower stabilizer bar deformation. Steering wheel not being straight means that the car wants to maintain straight driving, the steering wheel must be turned a certain angle, if placed in a horizontal position it cannot drive straight. The car steering wheel is tilted and does not automatically return to position after turning.
19
5
Share

Is the BMW 6 Series GT equipped with a four-wheel drive system?

BMW 6 Series GT is not equipped with a four-wheel drive system; it is a rear-wheel-drive vehicle. In terms of power, this car is equipped with a 2.0-liter turbocharged engine across the entire lineup, delivering a maximum horsepower of 258 and a peak torque of 400 Nm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission from Germany's ZF. Regarding the exterior, the car comes standard with LED lighting across all configurations. The side profile features very smooth and flowing lines, complementing the fastback design, maintaining elegance while also emphasizing sportiness. The front bumper design adds a more aggressive touch.
19
1
Share

How to Enable Tire Pressure Monitoring on Focus?

The method to enable tire pressure monitoring on Focus: Use a computer to activate the tire pressure monitoring system by connecting the ELM327 device to the car's OBD port. Change the 101st bit of the tire pressure monitoring to 44. In version 0.5, select TPMSWITHWBL in Focccus, while in the 0.8 Chinese version, choose the Deflation Detection System (DDS). Both settings should have a value of 44. The Focus is a compact car under Ford, available in both sedan and hatchback versions. It is equipped with two types of engines: a 1.5L naturally aspirated engine with 122 horsepower and 153 Nm of maximum torque, and a 1.5L turbocharged engine with 174 horsepower and 243 Nm of maximum torque.
19
2
Share

What is the difference between Passat 280 and 330?

Here are the differences between Passat 280 and 330: 1. Model: Passat 280 represents the 1.4T model, while 330 is a higher level, representing the 2.0T low-power version with a maximum horsepower of 186. 2. Engine: 280 has a 1.4T engine, and 330 has a 1.8T engine. Here is an extended introduction to the Passat: 1. Exterior: The new Passat's exterior design is more domineering and grand, adopting the latest family design elements. The body lines are strong and powerful, highlighting a grand style. 2. Interior: The new Passat's interior style is similar to other new Volkswagen models, but as the flagship sedan of SAIC Volkswagen, both the selection of interior materials and the configuration of technological features are very high-end.
2
4
Share

How to Turn Off BMW Intelligent Start-Stop?

To turn off BMW's intelligent start-stop function: On the engine start button, manually press the Aoff button. Normally, the automatic start-stop system is enabled by default when the key is powered on. To turn it off, simply press the button once. The intelligent start-stop engine automatically shuts off when the vehicle comes to a temporary stop during driving. Taking the BMW 5 Series as an example, its body dimensions are 5087mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3108mm. In terms of power, the BMW 5 Series is equipped with 2.0T and 3.0T engines, paired with an upgraded 8-speed automatic manual transmission.
19
5
Share

How to Start the Starter?

The starting method of the starter: Press the accelerator slightly, turn the key to the right to the end, and release it immediately after starting. The function of the car motor starter is to start the engine. The gear on the starter engages with the flywheel connected to the engine crankshaft during operation, driving the flywheel and thus the engine. The working principle of the starter: The control device of the car starter includes components such as the electromagnetic switch, starting relay, and ignition starting switch, with the electromagnetic switch integrated into the starter. The starter, also known as the motor, converts the electrical energy from the battery into mechanical energy to drive the engine flywheel rotation, achieving engine startup. Starters are categorized by working principle into DC starters, gasoline starters, compressed air starters, etc.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.