···
Log in / Register

Does hitting the BMW chassis affect the car?

1 Answers
DeGabriela
08/28/25 4:45am
If the car's chassis is hit but the vehicle shows no issues, there is no need to worry. The details are as follows: During the design phase, the chassis is built to withstand certain impacts. If the car's chassis is hit, drive it to a repair shop for a thorough inspection. If the pipes are undamaged and only the steel plate has scratches, applying some paint to prevent rust is sufficient. Methods to protect the car chassis: 1. Apply chassis armor: Chassis armor can be sprayed on exposed areas such as the vehicle's chassis, wheels, and fuel tank. It quickly dries to form a durable elastic protective layer, which not only prevents impacts from flying stones and gravel but also protects against moisture, acid rain, and salt erosion, preventing rust and corrosion. 2. Install an engine guard: The engine guard is a custom-designed protective device for different car models, primarily to prevent mud from covering the engine and to shield it from damage caused by uneven road surfaces. Not all car models come with this guard, so owners without one can choose to install it.
Was this review help?
6
1
Share
More Forum Discussions

How to Park 30 cm from the Curb Without Crossing the Line?

Methods for parking 30 cm from the curb without crossing the line: 1. Observe the front of the car: Slightly turn the vehicle to the right, align the driver with the middle of the road, then make minor adjustments to the right. Position the front one-third of the car's hood on the edge line of the right lane, straighten the body, and slowly brake when the vehicle is about 30 cm from the curb to stop. 2. Check the wiper: When the gap in the wiper aligns with the curb line while moving forward, the body is approximately 30 cm from the curb. 3. Look at the car's front reinforcement bar: This refers to the raised line on the right side of the car's front. When the reinforcement bar aligns with the curb line while moving forward, the distance is also roughly 30 cm. 4. Monitor the right rearview mirror: Observe the distance between the right side of the car body and the road edge. When the door handle just covers or touches the curb, the car body is within 30 cm of the curb without crossing the line.
4
5
Share

What is the reason for the constant rotation of the cold car fan in the Besturn B50?

The reason for the constant rotation of the cold car fan in the Besturn B50 is damage to the thermal switch, damage to the fan relay, or damage to the air conditioning pressure switch. Working principle of the cold car fan: The cold car fan generally has a noticeable cooling effect of 4-15 degrees. After the temperature drops, the air is rapidly replaced, and the air quality quickly improves. When the cold fan is turned on, negative pressure is generated inside the cavity, drawing external air through the efficient evaporative water curtain to lower the temperature, transforming it into cool fresh air that blows out from the air conditioning vents. The outlet temperature can reach 5-15 degrees, with power consumption of only 1 kWh per hour. Function of the cold car fan: The car engine must be properly cooled in high-temperature working environments to maintain it at an appropriate operating temperature, ensuring good engine performance, durability, and exhaust emission requirements. The cooling system plays a key role here, mainly including components such as the cooling fan, radiator, and thermostat.
13
0
Share

Why are there few people buying Audi S8?

Because the Audi S8 is a performance car, it leans more towards driving pleasure. Therefore, it targets only a small group of users, and few people buy it. Below is an introduction to the Audi S8: 1. Engine Introduction: The S8 is equipped with a 4.0-liter V8 engine, capable of accelerating from 0 to 100 km/h in just 4.1 seconds. The newer model is powered by a 5.2-liter V10 engine, which is developed from the 5.0-liter V10 engine of the Lamborghini Gallardo, delivering a maximum horsepower of 450 and a torque of 540 Nm. 2. Exterior: The exterior is the 'first signature' of a car, directly determining people's impression of it. To distinguish a car from others, the first step is to change its appearance. The S8 does this quite well; its crisscrossed grid front grille makes it instantly recognizable, and compared to the horizontal grille of the standard A8, the S8's vertical grille is more prominent. This difference not only sets it apart from the A8 but also adds more dominance to the S8's front fascia.
7
5
Share

How to reset the window glass of Mercedes-Benz C200?

Mercedes-Benz C200 has a window glass reset button. To reset, fully raise the glass and hold the window switch without releasing it for more than 10 seconds. Introduction to one-touch window control: One-touch window control refers to a system where the car window glass can be fully opened or closed with a single press of a button. Cars equipped with one-touch window control have a two-stage window switch. The first stage works like a regular power window. The second stage allows the window to automatically open or close completely with a single press and release. Precautions for using one-touch window control: Generally, after raising or lowering the window glass several times in succession, the vehicle will temporarily disable the window control function for a few seconds to prevent overheating and damage to the window motor. Wait for the function to resume before operating again.
4
4
Share

Why are there many small dots on the newly installed front windshield film?

The main reason is that some dust fell during the film installation process, causing these dust particles to be trapped inside. Here are the relevant explanations about the appearance of small dots on the film: 1. Difficulty in shrinking and fitting bubbles at the edges of the front and rear windshields: Cause analysis: The film edges are cut by pressing against ceramic dots, making it difficult to shrink and fit the bubbles inside. Solution: After pre-shaping, cut along the smallest edge of the ceramic dots during fine trimming, which makes it easier to shrink and fit the bubbles inside, especially for dry adhesive films. Avoid cutting by pressing against ceramic dots, as it will make fitting even more difficult and may even render the entire film unusable. 2. Difficulty in shrinking and fitting bubbles at the defogging lines on the rear windshield: Cause analysis: The rear windshield has defogging lines connected to ceramic dots, making it difficult to shrink and fit the bubbles on both sides. Solution: After pre-shaping, cut along the smallest part of the ceramic dots without pressing against them. When installing the film inside, please note that bubbles may appear where the film presses against the defogging lines. Therefore, the bubbles must be transferred to the blank space between the two defogging lines, and a heat gun should be used to shrink them again. For windshields with more prominent defogging lines or metal lines, it is best to use dry heat pre-shaping.
15
4
Share

What Are Some Tips for Removing Oil Film from Car Windows?

Methods for removing oil film from car windows: 1. Dishwashing Liquid: Some car owners use dishwashing liquid for cleaning, as oil film is essentially a type of oil. Dishwashing liquid contains hydrophilic and lipophilic groups, which can dissolve oil and water together, helping to remove grease. However, car window oil film not only contains oil but also substances like dust, tree sap, or car wax. While dishwashing liquid can be somewhat effective, its impact is limited and often insufficient for complete oil film removal. Additionally, if the dishwashing liquid is not rinsed off thoroughly, residue can make the glass slippery, causing the windshield wipers to skid and affecting visibility. 2. Toothpaste: Toothpaste is another method for removing oil film. It can be effective, but the key is choosing the right type—preferably one with abrasive particles, as these provide a scrubbing effect. However, it's important to apply it evenly and with controlled pressure to clean the glass surface and its pores thoroughly. 3. Oil Film Remover: The most professional approach is to purchase and use a dedicated oil film remover. Spray the cleaner evenly on the glass, then wipe it off with a car wash towel or sponge for optimal results. 4. Other Methods: There are also alternative ways to remove oil film, such as using an eraser or newspaper. Newspaper has some oil-absorbing properties, and repeated wiping can clean the glass effectively. This method is economical and efficient but time-consuming and labor-intensive. If the oil film area is small, these methods can be quite useful.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.