Does having one side wider than the other in the reverse parking test of Subject 2 result in penalty points?

How Many Years Until a Company-Owned Vehicle is Scrapped?

Company-owned vehicles have the same scrapping age limit as privately-owned vehicles. The latest 2021 regulations on vehicle scrapping age: the mileage limit for scrapping private cars has been set at 600,000 kilometers, while the previous restriction on the operational years for non-commercial cars has been lifted. Vehicles are exempt from inspection for the first 6 years, require annual inspections from 6 to 15 years, and need semi-annual inspections after 15 years. As long as the vehicle passes the annual inspection, it can continue to be driven. Taxis and ride-hailing vehicles are mandatorily scrapped after 8 years. Below are the considerations for vehicles that fail the annual inspection: 1. Accident Liability: For any traffic accidents caused by vehicles that have not undergone the annual inspection on time, the involved party will bear full or primary responsibility, and the insurance company will not be liable. This is because the insurance policy specifies that vehicles with expired inspection are among the categories for which claims are denied. 2. Mandatory Scrapping: According to the 'Mandatory Scrapping Standards for Motor Vehicles', any motor vehicle that fails to obtain the inspection qualification mark for three consecutive inspection periods after the expiration of its inspection validity period will be mandatorily scrapped.

17

5

Share

What Does It Mean When the Engine Exclamation Warning Light Comes On?

An exclamation mark inside the engine symbol indicates the engine warning light. There are primarily seven reasons why this light may illuminate: Sensor Malfunction: Sensors such as those for coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors may become damaged, have poor connections, or lose signal transmission. When the vehicle's ECU cannot accurately obtain engine data, the engine warning light will turn on. Fuel or Oil Quality Issues: Failure to use the fuel or oil specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor Combustion of Air-Fuel Mixture: Incomplete combustion can result in engine carbon buildup or knocking. The oxygen sensor detects this and reports it to the ECU, triggering the warning light. Issues like faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion. Turbocharger Problems: Issues with the intake boost system or turbocharger can also trigger the engine warning light. The most common problem is turbocharger damage, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake System Issues: Blockages in the engine intake system can lead to the warning light turning on. A dirty or uncleaned air filter can cause intake problems. Exhaust System Issues: Faults in the exhaust system, such as problems with the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings, can trigger the warning light. The catalytic converter is the most common culprit, often damaged by leaded gasoline, improper additives, physical impact, or fuel system issues. Anti-Theft System Malfunction: If the car's electronic anti-theft system fails or the anti-theft controller does not match the engine ECU, the engine may not operate correctly, and the warning light will illuminate. If the engine warning light comes on, follow these steps: First, check if the engine is running normally. Look for signs like shaking or black smoke. If present, avoid restarting the engine—especially if the light is red. If the engine can be started, turn it off for 5-10 minutes. Then, without pressing the brake, press the start button once or turn the key halfway to the 'ON' position (without pressing the clutch). The car will enter self-diagnosis mode. After 5-10 seconds, check if the warning light turns off. If the light remains on, visit a service center as soon as possible. Technicians can use a diagnostic tool to read trouble codes and perform targeted repairs.

16

5

Share

What Causes the Heavy Steering Wheel in the Classic Sylphy's Electric Power Steering System?

The reasons for the heavy steering wheel in the Classic Sylphy's electric power steering system are as follows: Excessive tightness between the rolling bearings and sliding bearings connected in the steering system, the pump pressure of the power steering pump failing to meet the standard value, low hydraulic pressure in the steering gear, and the presence of air in the steering system. Excessive tightness between the rolling bearings and sliding bearings connected in the steering system can reduce the lubrication effect of the bearings, causing sticking phenomena, which manifests as a heavy steering wheel. Lubricating oil can be added. When the pump pressure of the power steering pump fails to meet the standard value, the steering wheel will feel heavy during use. Check the flow control valve; if there is leakage in the flow control valve or safety valve during driving, it can be repaired by grinding. Then, check if the spring of the safety valve is failing. The pump pressure can be adjusted at a 4S shop. When the hydraulic pressure in the steering gear is low, the steering wheel will also feel heavy. If the heavy steering wheel is caused by low hydraulic pressure in the steering gear, it is necessary to promptly visit a repair shop for maintenance. When there is air in the car's steering system, not only will the steering feel heavy, but there will also be noise during steering. It needs to be addressed promptly to avoid unnecessary losses later.

4

3

Share

Is It a Big Deal If a Little Water Gets in the Car from Leaving the Window Open in the Rain?

It is not a big deal if a little water gets in the car from leaving the window open in the rain. However, to be on the safe side, it is best not to turn on any electronic devices in the car, such as the lights or starting the engine, to prevent short circuits caused by water exposure. Additional information: 1. Vehicle submerged while parked: When a vehicle is submerged, external water can enter the car through gaps like door seams and the external air circulation channels of the air conditioning system. This usually results in the carpet below the seats being completely soaked. If the external water level is high, it is likely that the battery and some electrical equipment in the vehicle will also be damaged by water. For vehicles severely submerged while parked, repair shops typically remove all interior components from the cabin. They then check the wiring, computer systems, and other parts for short circuits or burns, replacing any damaged components as necessary. 2. Vehicle submerged while driving: If a vehicle stalls due to water entering while driving, it is important to stay calm and immediately turn off the ignition. Do not attempt to restart the engine, as this can cause significant damage to the engine, and insurance companies may deny the claim. Then, quickly disconnect the negative terminal of the battery to prevent short circuits in the vehicle's electrical systems due to water exposure. Move the vehicle to a safe location, preferably with the front higher than the rear, to allow water in the exhaust pipe to drain out and avoid damaging the catalytic converter and muffler.

11

1

Share

Is water damage to vehicles covered by insurance?

Water damage to vehicles is indeed covered by insurance. Below is relevant information about water damage claims for vehicles: 1. Component compensation: If water enters the engine due to driving through water, the insurance will cover the replacement of engine oil and oil filter. 2. Condition compensation: For water drainage from compartments such as the driver's cabin, engine, or transmission, drainage fees will be covered. 3. Inspection compensation: If specialized computer diagnostics confirm that water immersion caused computer damage, the computer replacement will be covered. When driving through water, if the vehicle stalls, do not attempt to restart it. This could cause water to enter the engine, leading to valve damage and severe engine harm, which insurance does not cover.

2

1

Share

Why does the 14th-generation Sylphy's auto start-stop system malfunction?

14th-generation Sylphy's auto start-stop system may malfunction due to the following reasons: 1. Insufficient battery power: The auto start-stop function typically fails when battery charge drops below 60%. 2. Throttle valve malfunction: The engine auto start-stop system automatically shuts off the engine when temporarily stopping during driving, and restarts it when needing to proceed. Below is how the start-stop system works: When the vehicle stops due to traffic congestion or at intersections, the driver presses the brake pedal and shifts to neutral. At this point, the Start/Stop system automatically checks that the engine is idling without being in gear, the wheel speed sensors of the anti-lock system show zero, and electronic sensors indicate sufficient energy for the next start. When these three conditions are met, the engine automatically stops running.

19

0

Share

Does having one side wider than the other in the reverse parking test of Subject 2 result in penalty points?

How Many Years Until a Company-Owned Vehicle is Scrapped?

What Does It Mean When the Engine Exclamation Warning Light Comes On?

What Causes the Heavy Steering Wheel in the Classic Sylphy's Electric Power Steering System?

Is It a Big Deal If a Little Water Gets in the Car from Leaving the Window Open in the Rain?

Is water damage to vehicles covered by insurance?

Why does the 14th-generation Sylphy's auto start-stop system malfunction?

Is it necessary to install side steps for cars?

What is the minimum speed in second gear without accelerating?

What Causes the Sound of Water Sloshing Behind the Brakes?

How to Deal with Nervousness and Anxiety Before the Subject 3 Driving Test?