Does having multiple children in the car count as overloading?

1 Answers
LilaLee
07/29/25 2:41pm
Multiple children count as overloading. Here is expanded information regarding penalties for various types of motor vehicle overloading: 1. The following violations by motor vehicle drivers will result in 6 penalty points: Operating a commercial passenger vehicle (excluding buses) or school bus with passengers exceeding the approved capacity by less than 20%, or operating a passenger vehicle with passengers exceeding the approved capacity by 20% or more. 2. The following violations by motor vehicle drivers will result in 3 penalty points: Operating a passenger vehicle other than commercial passenger vehicles (excluding buses) or school buses with passengers exceeding the approved capacity by less than 20%.
Was this review help?
12
0
Share
More Forum Discussions

What is the normal tire pressure for cars in kPa?

Car tire pressure is normal at 240 kPa to 250 kPa, while reinforced tires have a normal pressure of 280 kPa to 290 kPa. The tire pressure differs between cold and hot tires, with hot tires having about 20 kPa higher pressure than cold tires. Here are specific details about tire pressure: 1. Tire pressure refers to the air pressure inside the tire, which is a crucial factor affecting the tire's lifespan and fuel economy. The level of tire pressure plays a vital role in the performance and power of the car. 2. Choosing an inappropriate tire pressure can lead to power cycling, increasing tire wear and affecting its lifespan. Considering the impact on vehicle performance, it is essential to select the right tire pressure to extend tire life and improve fuel economy.
14
5
Share

Why was the Changan Oushang CX70 discontinued?

The following are the specific reasons for the discontinuation of the Changan Oushang CX70: 1. Poor sales performance. In terms of brand recognition, it has always been relatively low. In 2020, the monthly sales of the CX70 ranged between 400-600 units, with the peak being only 1,400 units, which is the primary reason for its discontinuation. 2. The Oushang X7 is currently the flagship model of the Oushang brand. However, there is some overlap in the positioning of the CX70 and the Oushang X7, leading to the discontinuation of the CX70. Additionally, the design of the CX70 could no longer keep up with the development pace of Oushang. 3. The implementation of the China 6 emission standards accelerated the discontinuation of the CX70. In fact, as early as 2019, the China 6 standards had already been implemented in some cities. Given the poor sales, Oushang deemed it unnecessary to update the CX70. Taking advantage of the introduction of the China 6 standards, Oushang decided to discontinue the CX70.
4
5
Share

What are the techniques for depressing the clutch?

The methods for depressing the clutch are as follows: 1. Depress the clutch quickly to ensure complete separation and avoid clutch slippage; 2. Release the clutch slowly to ensure smooth vehicle operation; 3. Do not depress the clutch arbitrarily. Precautions for clutch usage are: 1. The clutch must be thoroughly cleaned before installation to remove anti-rust grease and debris; 2. The clutch can be installed coaxially or separately, but the axial direction must be fixed; 3. For wet electromagnetic clutches, lubricating oil must be added between the friction plates during operation; 4. The power supply and control circuits should be noted, with the clutch power supply being 24V DC; 5. When installing a jaw-type electromagnetic clutch, ensure there is a certain gap between the end face teeth to prevent grinding during idle operation.
7
2
Share

What is the normal tire pressure in kPa?

Generally, a tire pressure value between 2.3 and 2.5 is considered normal. If the car is fully loaded (5 people), it is more appropriate to adjust the tire pressure to around 2.5. In general, there are two situations where a tire pressure value of 2.3 is also normal. Content Extension: 1. The standard tire pressure value is inherently a conservative figure, allowing for minor fluctuations. Therefore, whether in winter or summer, tires should be inflated according to the standard tire pressure. As long as the standard tire pressure is maintained, there is no need to worry about the impact of external temperature on tire pressure, and there is no necessity to adjust the inflation pressure standard based on temperature variations. 2. Tires require the correct pressure value to function effectively; neither too low nor too high tire pressure is good. 3. Low tire pressure can lead to: tire overload and overheating, which may even cause tire explosions, premature or irregular wear, poor handling, and reduced fuel economy. 4. High tire pressure can result in: abnormal wear, poor handling, reduced ride comfort, and unnecessary damage due to road hazards.
8
3
Share

What is the vehicle and vessel tax for a 2.4L displacement car?

For passenger vehicles with a 2.4L displacement and seating capacity of 9 or fewer, the annual vehicle and vessel tax ranges from 720 to 900. The vehicle and vessel tax not only varies based on the car's displacement but also differs across regions, meaning the same displacement vehicles may have different tax standards in different areas. Extended Content: 1. For motor vehicles (excluding trucks) and non-motor vehicles, the tax payable = number of taxable vehicles × unit tax amount. 2. For trucks, motorized boats, and non-motorized boats, the tax payable = tonnage or net tonnage of the vehicle or boat × unit tax amount.
19
3
Share

What Causes an Automatic Transmission Car to Not Move When Shifted to D Gear?

Here are the specific reasons why an automatic transmission car does not move after shifting to D gear: 1. Check if the transmission fluid level is too low, whether the main oil pressure and gear oil pressure are normal, and then verify if the gear switch signal is normal, if the wiring from the transmission computer to the shift solenoid valve is intact, and if the gear solenoid valve is functioning properly. 2. If none of the above issues are found, it indicates a problem with the internal control system of the transmission, requiring disassembly of the transmission to inspect the internal components. Below is additional information about automatic transmission gears: (1) The R gear is the reverse gear. When engaged, it connects the hydraulic system to the reverse gear circuit, causing the drive wheels to turn in reverse for backing up. Do not forcibly shift to "R" gear when the vehicle is not completely stopped, as this can damage the transmission. (2) The N gear is the neutral gear. When in neutral, the planetary gear system idles without transmitting power. (3) The D gear is the drive gear. When the shift lever is in this position, the hydraulic control system automatically engages the appropriate forward gear circuit based on throttle opening and vehicle speed signals, shifting gears automatically as speed changes to achieve automatic transmission functionality. (4) The P gear is the parking gear. It uses a mechanical device to lock the rotating parts of the car's tires, preventing the vehicle from moving.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.