Does flooding a car have any impact on the vehicle?

1 Answers
McAurora
07/28/25 6:49pm
Flooding a car does have an impact on the vehicle. The most concerning issues when a car is submerged in water are the potential damage to the engine and electrical system. Water entering the engine's air intake can directly affect the engine, and the electrical system is also highly vulnerable to water damage. Below is some relevant information about flood-damaged cars: 1. Flood-damaged cars pose significant safety hazards, as the electrical circuits are prone to short circuits or even catching fire. While they can be repaired to some extent, even after repairs, these vehicles still carry substantial safety risks. Most auto repair shops, including authorized service centers, are reluctant to work on flood-damaged cars due to the lingering issues, primarily contamination-related and electrical system complications. 2. The number of years a flood-damaged car can continue to operate depends on the extent of the damage and subsequent maintenance. However, the longer a vehicle remains submerged, the higher the likelihood of malfunctions, including issues with the engine and electrical system.
Was this review help?
12
1
Share
More Forum Discussions

What are the symptoms of a faulty thrust bearing?

Thrust bearings, also correctly known as pressure bearings, consist of two pressure top rubbers and a pressure bearing component. They are installed at the top of the front suspension and connect to the vehicle body. A faulty thrust bearing may exhibit the following symptoms: 1. A "squeaking" sound when turning the steering wheel while stationary or at low speeds, with severe cases causing noticeable steering wheel vibration. 2. A "thudding" sound when driving on bumpy roads or over speed bumps. 3. Noticeably increased tire noise during driving, with severe cases producing a "humming" sound. 4. Vehicle pulling to one side could also be caused by a damaged pressure bearing.
6
3
Share

How many liters of transmission oil are needed for a BMW X5?

BMW X5 requires 7L of transmission oil. Here are some relevant details about the BMW X5 transmission oil: 1. The BMW X5 requires 7L of transmission oil, but a complete replacement needs 9 to 10L. 2. The main function of transmission oil is to keep the shifting system clean and to lubricate the transmission components, extending their lifespan. Transmission oils are categorized into manual and automatic based on the transmission design. 3. The BMW X5 is the first four-wheel-drive SUV model under the BMW brand, with dimensions of 4930mm in length, 2004mm in width, 1776mm in height, and a wheelbase of 2975mm. 4. The vehicle features a family-style design concept, with the front face showcasing the classic double-kidney grille. The large grille enhances the sporty attributes, while the double-kidney design also improves recognition.
7
5
Share

How to Fold Down the Rear Seats of the Geely GS?

Here is the method to fold down the rear seats of the Geely Emgrand GS: 1. There is a buckle-type fixed switch at the top of the rear seats, with a pivot connection between the backrest and the seat cushion, allowing the backrest to be easily folded down with a one-touch operation. 2. In terms of configuration, the vehicle is equipped with features such as electrically adjustable mirrors, mirror heating, daytime running lights, and automatic headlights. 3. The interior of the Emgrand GS includes a multifunction steering wheel, automatic air conditioning, rear parking sensors, and other configurations, with a stylish red tail decoration design added to the rear bumper area. 4. The dimensions of the Geely Emgrand GS are 4440mm in length, 1833mm in width, and 1573mm in height, with a wheelbase of 2700mm. 5. The engine of this vehicle delivers a maximum horsepower of 141Ps, a maximum power of 104kW, and a maximum torque of 235Nm.
3
4
Share

What does drum brake refer to in cars?

Drum brake is a braking device that uses stationary brake shoes inside the brake drum to rub against the rotating brake drum attached to the wheel, thereby generating friction to reduce the wheel's rotation speed. Here is more information about drum brakes: 1. When the brake pedal is pressed, the force from the foot causes the piston in the master cylinder to push the brake fluid forward, creating pressure in the hydraulic lines. This pressure is transmitted through the brake fluid to the wheel cylinder pistons at each wheel. The wheel cylinder pistons then push the brake shoes outward, causing them to rub against the inner surface of the brake drum and generate sufficient friction to reduce the wheel's rotation speed, achieving the braking effect. 2. Drum braking works by using the wheel cylinder pistons to push the brake shoes outward, pressing them against the friction surface to generate braking force. One advantage is that the brake shoes can automatically lock tighter as the wheel rotates. It doesn't require a large braking force to achieve smooth braking, as it utilizes the rotational energy of the wheel itself.
20
4
Share

How to reset the warning light on a car?

Generally, when a car's warning light comes on, it cannot be manually reset. Typically, you need to visit a 4S shop to use a diagnostic tool for troubleshooting before the light can be reset. Generally speaking, there are two scenarios when the engine warning light comes on: 1. A yellow symbol light indicates that there is a fault in the engine, but it does not affect the engine's normal operation. However, inspection and repair are necessary. 2. A red symbol light indicates a serious engine fault, and under normal circumstances, immediate repair is required. In special road conditions, you may drive the car temporarily, but you must constantly monitor the engine's working condition. If the coolant temperature is too high or the oil pressure warning light comes on, and you clearly feel that the vehicle has a fault, you should immediately pull over and call a repair shop for assistance to avoid affecting the engine's performance. Most vehicle warning lights are caused by the fuel emission system. When the warning light is on, start and turn off the vehicle three times, then start it again to observe whether the warning light remains on. If it is still on, you need to promptly visit a shop to check the fault code and determine whether the issue lies with the engine or a sensor fault.
14
0
Share

Is Independent Suspension Better or Non-independent Suspension?

From the perspective of driving handling and comfort, independent suspension has a slight advantage. Here is more information about independent suspension and non-independent suspension: 1. Independent suspension system means that the wheels on each side are individually suspended under the frame or body through an elastic suspension system; non-independent suspension means that the wheels on both sides are connected by an integrated frame, and the wheels together with the axle are suspended under the frame or body through an elastic suspension system. 2. The advantages of independent suspension are light weight, reduced impact on the overall body, and improved wheel adhesion. Compared to non-independent suspension, its most outstanding feature is comfort; the advantages of non-independent suspension are simple design structure, light weight, and small space occupation. Compared to independent suspension, its most outstanding feature is high strength. 3. Independent suspension can mainly be divided into MacPherson strut, double wishbone, multi-link, etc. Most modern cars use independent suspension systems. In terms of application, independent suspension is obviously more widely used than non-independent suspension; the most commonly used non-independent suspensions are torsion beam non-independent suspension, trailing arm non-independent suspension, and leaf spring non-independent suspension. In modern cars, only models with strict cost control use non-independent suspension, and it is more commonly used in trucks and buses.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.