Does FAW-Volkswagen not have the Lavida?

1 Answers
DelErin
07/29/25 8:15pm
Lavida belongs to SAIC Volkswagen. SAIC Volkswagen is a joint venture brand between SAIC Group and Volkswagen Germany, while FAW-Volkswagen is a joint venture brand between FAW Group and Volkswagen Germany. Related introductions are as follows: 1. SAIC Volkswagen has models such as Polo, Lavida, Santana, Lamando, Passat, Phideon, Tiguan, Tiguan L, Teramont, and Touran L, while FAW-Volkswagen has models such as Jetta, Sagitar, Magotan, Golf, Bora, and CC. 2. The naming of LAVIDA Lavida is profoundly meaningful. Its English name LAVIDA is a typical Spanish word, representing life, living, and hope, symbolizing the unrestrained and dynamic power of life and a lifestyle full of fun, advocating an innate potential of life that bursts from within.
Was this review help?
9
3
Share
More Forum Discussions

Does the Excelle have a rear anti-collision beam?

The Excelle is equipped with a rear anti-collision beam that covers almost the entire rear section. It is made of DP1000 ultra-high-strength steel with a material yield strength of 645MPa and a thickness of 1.2mm, featuring a hat-shaped structure and designed with crush guide grooves. An anti-collision beam is a device used to absorb collision energy and mitigate damage when a vehicle is impacted. It consists of a main beam, energy-absorbing boxes, and mounting plates that connect to the vehicle. Both the main beam and energy-absorbing boxes effectively absorb collision energy during low-speed impacts, minimizing damage to the vehicle's longitudinal beams and thereby providing protection. The role of the Excelle's rear anti-collision beam is to offer protection and reduce body deformation in medium-to-low-speed collisions, provided that the connecting brackets of the beam have sufficient buffering and energy-absorbing capabilities. The rear anti-collision beam absorbs impact forces, ensuring that in minor rear-end collisions, the beam is sacrificed to preserve the integrity of the vehicle's chassis. Without a rear anti-collision beam, when the rear of the vehicle is struck, after the energy-absorbing materials absorb part of the impact energy, the remaining energy would inevitably transfer to the entire rear panel, ultimately causing deformation.
1
5
Share

How to adjust the time on the Tiida radio?

Here is the method to adjust the time on the Tiida radio: 1. Press and hold the TIME button until the hour flashes, then rotate the tuning knob to adjust. 2. Briefly press the TIME button again to make the minutes flash, then rotate the tuning knob to adjust. 3. Finally, briefly press the TIME button to confirm. Here is more information about the Tiida: 1. The Tiida comes standard with a TPMS intelligent tire pressure monitoring system and a smart eye driving recorder. The Zhixing and Zhixiang versions also feature a multifunction steering wheel upgraded to genuine leather. 2. The Tiida is equipped with a 1.6L naturally aspirated engine, delivering a maximum output of 93kW and a peak torque of 168N·m, paired with either a manual or CVT transmission.
5
1
Share

What kind of vehicle is the Raptor?

Raptor is a pickup truck under the Ford brand. Here are some introductions about the Raptor: 1. This vehicle is equipped with a 3.5-liter twin-turbocharged engine, which has a maximum power of 280kW, a maximum torque of 672 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed of 3000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. The front suspension uses a double-wishbone independent suspension, while the rear suspension uses a leaf spring non-independent suspension. This vehicle is equipped with a part-time four-wheel drive system.
18
1
Share

What to Do When a Vehicle Won't Start?

If your vehicle won't start, here are some solutions: 1. First, check the spark plugs: If there's excessive carbon buildup, replace them with new ones. 2. Dead battery: The symptom is the starter motor turning but not fast enough (lacking power). If this happens, call the service station for assistance, jump-start the vehicle, or temporarily start it, then be sure to recharge the battery at the service station. 3. Fuel flow obstruction: The symptom is no fuel pressure in the engine's fuel line. Move the vehicle to a warm environment or thoroughly clean the fuel system. 4. Poor ignition system performance: Remove the spark plugs, clean the oil stains between the electrodes, and reinstall them to start the engine. 5. Valve sticking: Take the vehicle to a service station for a no-disassembly cleaning. In severe cases, disassemble and clean the cylinder head.
1
3
Share

How to Switch to Four-Wheel Drive in the Highlander?

The Highlander is equipped with an on-demand four-wheel-drive system. The central differential uses a multi-plate clutch-type limited-slip differential, along with electronic brake assistance based on the ESC system. Power is transmitted to the rear axle via an electronically controlled multi-plate clutch. The computer adjusts the power distribution between the front and rear axles based on driving conditions. Typically, the vehicle operates in front-wheel-drive mode, with automatic switching between 100:0 and 50:50 power distribution. Below is an introduction to the Highlander's four-wheel-drive system: The four-wheel-drive system is a standout feature of the Highlander. Proper use of four-wheel drive maximizes the powerful performance of this large vehicle. Additionally, the Highlander boasts HAC (Hill-start Assist Control) and DAC (Downhill Assist Control). HAC automatically maintains brake pressure on all four wheels for two seconds, effectively preventing rollback. DAC ensures the vehicle maintains a constant speed when descending steep slopes, enhancing downhill safety.
10
3
Share

How to Charge a BMW Car Battery?

BMW car battery charging method: Open the hood, lift up the positive terminal clamp, and there is a grounding cylinder inside the hood. Connect the charger to start charging. Below is relevant information about BMW car batteries: 1. New batteries often do not reach full capacity after the first charge and should undergo a discharge cycle. 2. Discharge at a 20-hour rate (i.e., discharge with a current equal to 1/20 of the rated capacity until the cell voltage drops to 1.75V), then recharge with the appropriate current. 3. As long as the engine is running and the alternator is functioning properly, it will generate electricity, and the alternator will charge the battery. 4. When the battery is fully charged, charging will stop. As long as the battery's energy is not depleted, there is no need to charge it. The alternator charges without interruption and has no fixed time; it adjusts the charging current based on the battery's charge level.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.