···
Log in / Register

Does exceeding 5000 kilometers for the first maintenance have any impact?

4 Answers
KennedyMarie
07/29/25 4:40am
The first maintenance exceeding 5000 kilometers has no impact. The first maintenance includes: 1. Changing the engine oil, oil filter, cleaning the air filter, and checking whether the generator belt and wiper blades are damaged; 2. Checking whether the levels of various fluids are normal; 3. Checking whether the tire pressure is normal and whether the tires have uneven wear, bulges, or damage; 4. Inspecting the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches. The precautions for the first maintenance are: 1. Make an appointment in advance; 2. Record any faults or questions encountered while driving and inform the staff during the maintenance registration.
Was this review help?
15
5
Share
DiAlivia
08/12/25 5:21pm
Hi, as an ordinary person who drives frequently, I've found that exceeding the first service by over 5,000 kilometers does have some impact. Last time my car went over by more than 200 kilometers, the mechanic mentioned that new car engines need timely oil changes during the break-in period to protect internal components. Exceeding the limit might lead to aged oil accumulating metal shavings, causing noise or increased fuel consumption. If you're only slightly over, say within 100 kilometers, the dealership might still accept it. But exceeding by too much could void the manufacturer's warranty, meaning you'd have to pay out of pocket if engine issues arise. I suggest getting the service done promptly, developing the habit of checking mileage, and reviewing the vehicle manual for specific requirements. Safe driving is the priority—don’t delay too long to avoid unnecessary expenses.
Was this review help?
6
0
Share
Expand All
VanElena
10/03/25 3:50am
As a new car owner, I'm particularly concerned about exceeding the 5,000 km mark for the first maintenance. After consulting several friends, they said slightly exceeding is acceptable, but not by too much, because the initial oil in a new car is specially formulated to lubricate the engine internals. Exceeding the mileage can lead to sludge buildup and faster component wear. Warranty considerations are also crucial, as manufacturers typically require the first maintenance within 5,000 km; exceeding this may result in denied claims for engine issues. I've installed an app to remind myself to schedule service on time. Overall, a slight overage is manageable, but prompt action is necessary to protect my car's performance.
Was this review help?
13
2
Share
Expand All
AbigailAnn
11/16/25 5:29am
Having worked in the auto repair industry for many years, exceeding 5,000 km for the first oil change definitely has drawbacks. New engines produce fine metal particles during break-in, and delaying factory oil changes accelerates engine wear. A slight overage is tolerable, but exceeding by 500 km increases risks like louder engine noise and higher fuel consumption. Warranty terms clearly require maintenance within recommended intervals; exceeding may void coverage. I advise owners to service early rather than save small money to spend big later.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

How to Set Up Keyless Entry for the New Audi A6?

Here are the detailed steps to set up keyless entry for the new Audi A6: 1. First, press the vehicle's one-touch start button to start the engine; otherwise, the setup cannot be completed. 2. Place the key in the key induction area located in the center console armrest. 3. Press the custom button on the right side of the multifunction steering wheel. 4. Press the OK button on the left side of the multifunction steering wheel to complete the setup. Below is a detailed introduction to the keyless entry function: 1. When the key approaches the Audi A6, the doors automatically unlock, and the anti-theft alarm is deactivated, accompanied by the turn signals flashing twice. 2. When the key moves away from the Audi A6, the doors automatically lock, and the anti-theft alarm is activated, with the turn signals flashing once and the horn emitting a short beep. 3. The effective detection distance for the main door is no less than 1.5m, while other doors are effective when the key is near the door.
6
0
Share

Which is faster, a rear axle ratio of 4.11 or 4.33?

The rear axle ratio of 4.33 is faster. Here are the detailed explanations: 1. Alternative name: The rear axle ratio is an important parameter of the engine, commonly known as the rear axle ratio, and its academic name is the final drive ratio. 2. Introduction: The rear axle ratio refers to the gear transmission ratio of the main reducer in the vehicle's drive axle. 3. Calculation method: It is equal to the ratio of the rotational angular velocity of the drive shaft to the rotational angular velocity of the axle's half-shaft, and also equal to the ratio of their rotational speeds. Here are some additional explanations: The vehicle's transmission serves the purpose of changing speed and torque, and the differential inside the vehicle also includes the main reduction gear, which further reduces speed and increases torque. When the engine operates, it runs at very high speeds, requiring the transmission to reduce the speed and increase the torque so that the vehicle can operate normally.
19
0
Share

What Causes the Engine to Feel Sluggish and Fail to Accelerate When the Throttle is Pressed Hard?

Here are the common reasons why a car feels sluggish and fails to accelerate when the throttle is pressed: 1. Poor-quality gasoline that does not meet standards. This usually occurs when low-quality gasoline is filled at an unregulated gas station, leading to incomplete combustion of the air-fuel mixture during engine operation and triggering the engine warning light. While this does not affect driving safety, it can cause varying degrees of damage to the engine. 2. Oxygen sensor malfunction. Modern cars are equipped with two oxygen sensors, one before and one after the three-way catalytic converter. If the oxygen sensor is damaged or the sensor connector is faulty or loose, it can result in an overly lean or rich air-fuel mixture. 3. Another possible cause is a malfunction in the drivetrain. In a car, the engine provides power, while the drivetrain is responsible for transmitting this power to the wheels. If there is an issue with the drivetrain, pressing the throttle may result in poor acceleration.
16
0
Share

Secret Tips for Rapid Memorization of Subject 1?

Memory tips include: 'Two revocations, three suspensions, five drunk driving escapes lead to lifetime ban'; '30 km/h when turning, crossing bridges, on narrow roads, or muddy paths'; 'Observe left and right, overtake from the left'; 'No parking within 50 meters of intersections, turns, narrow roads, tunnels, bridges, slopes, or railway crossings.' Definition of Subject 1: Subject 1, also known as the theoretical test for drivers, is part of the motor vehicle driver's license examination. According to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' the test covers fundamental driving theory, road safety laws and regulations, local regulations, and related knowledge. The test is computer-based, consisting of 100 questions, with a passing score of 90 or above. Test content for Subject 1: The test includes fundamental driving theory, road safety laws and regulations, traffic signals, rules of the road, and other basic knowledge, along with local regulations. The scheduling of the theoretical test for drivers is arranged by local vehicle management offices.
12
2
Share

What Causes Exhaust Pipe Abnormal Noise?

The causes of exhaust pipe abnormal noise are as follows: Failure to change engine oil regularly: Conventional engine oil needs to be replaced every 5,000 kilometers, while higher-quality full synthetic oil must also be replaced after 7,000 to 8,000 kilometers. It is essential to change the oil on time and develop the habit of frequently checking the oil dipstick. Incorrect engine oil grade: It is best to use the same oil grade as the original factory oil. Avoid adding different oil grades arbitrarily, as different oil grades represent different oil viscosities. Oil that is too thin or too thick can cause increased engine noise. Shock absorber malfunction: Everyone knows the role of shock absorbers. Generally, you can feel the quality of the vehicle's shock absorbers when going over speed bumps. When there is a problem with the vehicle's shock absorbers, it can lead to increased engine noise.
16
2
Share

Will points be deducted for crossing the line in the left-turn waiting area?

Crossing the line in the left-turn waiting area does not result in point deductions because the lines in the waiting area are dashed. Making a U-turn in the waiting area: Even in areas with a waiting zone, you must wait for the red light to make a U-turn. For U-turns, as long as it is not under a red U-turn signal and does not obstruct traffic from other directions, it is permissible to make a U-turn. Purpose of the waiting area signs: These signs are designed to alleviate intersection pressure and improve vehicle traffic capacity. Left-turn waiting area: When the traffic light at the intersection turns green, vehicles intending to make a left turn should enter the left-turn waiting area and wait, while also observing the left-turn traffic signal ahead. Once the left-turn signal turns green, proceed through the intersection as quickly as possible. Small left turns and large left turns are merely designated lanes based on existing intersection conditions, but the appropriate lane should be chosen according to the size and height of the vehicle.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.