Does Desay SV 280b Support CarPlay?

Why can't the battery be fully charged?

The reasons why the battery cannot be fully charged: Battery lifespan expired: If the electric vehicle cannot be charged, the first consideration is the battery lifespan issue. Generally, the battery lifespan cycle is 2-3 years, and the main factors determining lifespan are related to the user's usage habits. Perform daily proper battery maintenance. Fuse blown: If the internal fuse of the battery is blown, the battery will have no power. Professional repair is required at a maintenance shop. Poor contact: When there is poor contact between the fuse tube and fuse holder, the electric vehicle battery may also fail to charge or not charge fully.

8

5

Share

What is the Difference Between Forging and Casting?

The distinction between forged and cast wheels mainly lies in the manufacturing process, cost, and weight. Different Processes: In terms of mold selection, cast wheels use sand molds, while forged wheels use steel molds. Cast wheels undergo natural cooling followed by machining processes such as deburring, surface finishing, and polishing. Forged wheels, on the other hand, are shaped through stamping before undergoing machining. The casting technology determines performance. From a performance perspective, forged wheels are stronger and lighter, while cast wheels offer better filling properties, fewer shrinkage cavities, and higher density. Different Costs: The casting process is simpler and relatively lower in cost, whereas forging involves more complex procedures, resulting in higher manufacturing costs. In terms of pricing, forged wheels of the same model are typically much more expensive than low-pressure cast wheels. Different Weights: Forged wheels require continuous stamping to take shape, which results in a very tightly packed molecular structure after forming. This allows them to withstand higher pressure, making forged wheels lighter in weight compared to cast wheels of the same size and strength. In summary, forged wheels have a more precise manufacturing process, making them superior to cast wheels. As a result, high-end vehicles often opt for forged wheels.

14

2

Share

What are the procedures and precautions for new car inspection at the testing site?

The procedures and precautions for new car inspection at the testing site are as follows: 1. First, visually inspect the body paint surface to check for scratches, spots, dents, and wear. Observe the paint under sufficient sunlight to see if there is any color difference. Open the doors and adjust them to different angles to allow light to shine from various directions, checking if the sheet metal is smooth and if there are any signs of repair. 2. Check the vehicle identification plate, which is located on the side of the driver's door or in the engine compartment. Pay attention to whether the manufacturing date is too far in the past. If it exceeds six months, the car is likely a stock vehicle or a test drive car. Also, ensure that the information on the identification plate matches that on the vehicle certification. 3. Inspect the windshield. The numbers represent the most recent production year, and the dots indicate the production month. If the dots are on the left side of the number, it means the windshield was produced in the first half of the year. Subtract the number of black dots from 7 to get the specific year. If the dots are on the right side, it means the windshield was produced in the second half of the year. Subtract the number of black dots from 13 to get the specific year. If the windshield's production date is far from the car's production date—by a year or more—it is likely that the windshield has been replaced. 4. Open the engine hood and check if the engine compartment is clean. If the car has been stored for a long time or used, some areas may have noticeable dust or stains. Also, check if the engine oil level is sufficient and if other fluid levels are within the acceptable range. 5. Open the doors and check if they open and close smoothly and flexibly, with no noise from the hinges. Ensure the gaps between the doors and the front and rear bumpers are consistent and that the doors can be closed in one motion. 6. Check the production date of the tires. Since tires are purchased separately, their production date will naturally differ from the car's production date, which is not a major concern. However, if the tire production date is significantly older than the car's delivery date, it is worth noting. 7. Test the basic functions of the car, such as whether the windows roll up and down properly, the air conditioning cools, the air vents emit any unusual odors, the dashboard functions operate normally, the windshield wipers work, the lights turn on correctly, and the sunroof opens and closes smoothly. 8. Test drive the car if allowed. Observe whether the engine idles smoothly, the steering wheel vibrates noticeably, the front and rear seats shake significantly, or if there is any unusual noise inside the car.

7

2

Share

BYD F3 Disabling the One-Minute Auto-Lock Feature

Disconnect the power for 15 minutes, then reconnect to see if it resolves the issue. Alternatively, after unlocking the door, insert the spare key within 15 seconds, turn it to the ON position to illuminate the dashboard (note: only illuminate the dashboard without starting the engine), and then turn it off for 10 consecutive cycles to force disable the feature. You can refer to the key markings: OFF-ACC-ON-START, where OFF-ON and ON-OFF count as one cycle. The working principle is as follows: 1. Integrated chip; most electronic car anti-theft devices contain an integrated chip with internal switches that output a positive voltage to the drive circuit when an external trigger voltage is applied, activating the actuator and alarm circuit. 2. External voltage; the external voltage is applied via sensors or switches, ensuring concealment and tamper resistance. 3. Interconnected circuits; factory-installed anti-theft systems in electric vehicles operate similarly to electronic anti-theft devices but with interconnected circuits primarily designed to lock the system. 4. Network-based anti-theft; these systems offer enhanced functionality compared to electronic anti-theft devices, including sending alerts to the owner's phone and the ability to lock the system. Phone-based GPS can locate the vehicle within a specific range.

12

4

Share

How long does the subject three review take?

Subject three review generally takes 3-7 days. Here is the relevant information: Pre-drive check: This involves walking around the vehicle for inspection. The exam vehicle will have buttons installed on all four corners. During the walk-around check, you must press all four buttons to complete the process. Light test: This is to familiarize drivers with the use of vehicle lights in various nighttime situations. Simply follow the system prompts to perform the corresponding light switching operations. Straight-line driving: This is a routine operation. Ensure you hold the steering wheel steady to prevent the vehicle from deviating. Lane changing and overtaking: When changing lanes or overtaking the vehicle ahead, use the turn signal. During gear shifting, coordinate the clutch and throttle properly to avoid gear jamming.

6

1

Share

Can I retake Subject 4 on the same day?

Subject 4 allows one retake on the same day if failed. Regulations: Each subject can be taken once, with one retake opportunity if failed. If the retake is not attended or still results in failure, the current test session ends, and the applicant must reschedule. However, Subject 2 and Subject 3 tests must be rescheduled at least 10 days later. If the Subject 3 safety and civilized driving knowledge test is failed, the passed road driving skill test scores remain valid. Test attempts: Within the validity period of the driving study certificate, the number of rescheduling attempts for Subject 2 and Subject 3 road driving skill tests cannot exceed five. If the fifth attempt still results in failure, all previously passed subjects will be invalidated.

15

5

Share

Does Desay SV 280b Support CarPlay?

Why can't the battery be fully charged?

What is the Difference Between Forging and Casting?

What are the procedures and precautions for new car inspection at the testing site?

BYD F3 Disabling the One-Minute Auto-Lock Feature

How long does the subject three review take?

Can I retake Subject 4 on the same day?

How many meters does a car travel per second?

Do I Need to Press the Electronic Handbrake on the 8th Generation Camry?

What Tools Are Needed to Change a Tire?

How Long Does It Take for a New Car to Have No Formaldehyde?