Does crossing the line during reverse parking in Subject 2 result in penalty points?

1 Answers
VonAlexander
07/29/25 12:13pm
Crossing the line during reverse parking results in a 100-point deduction, leading to failure in the current test. Other actions that also result in a 100-point deduction include the vehicle body crossing the line, failing to park in the designated area, stopping midway, not following the prescribed route, not adhering to the sequence, or exceeding the allotted time. Both subjects have a maximum score of 100 points, with evaluation criteria set for failure, 20-point deduction, 10-point deduction, and 5-point deduction. The rules for the Subject 2 driving test state that any of the following actions will result in failure: stopping or rolling back during the test, not following the voice prompts, or having the wheels or body cross the line. Many students encounter line-crossing issues during Subject 2 training, with "crossing the line" being the most common reason for failure. The primary cause of wheel line-crossing is the student's failure to master the correct timing for steering. Apart from missing the steering timing, another reason could be the steering speed not keeping up with the vehicle's speed. Subject 2 penalty standards: Not wearing a seatbelt: 100-point deduction. Starting the engine without the gear in neutral: 100-point deduction. Not using the turn signal (including when starting, changing lanes, overtaking, turning, or parking by the roadside); turning signal not used for more than three seconds (note that this is easily overlooked!); forgetting to turn off the turn signal or using it incorrectly: 10-point deduction. Stalling once: 10-point deduction. Reverse parking: Not following the prescribed route sequence: 100-point deduction. Vehicle body crossing the line: 100-point deduction. Failing to park in the designated area: 100-point deduction. Before reversing, if both front wheels do not pass the control line: 100-point deduction. Exceeding the 210-second time limit for the task: 100-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Slope parking and starting: After stopping, if the front bumper is not aligned with the pole line and exceeds 50 cm in either direction: 100-point deduction. After stopping, if the front bumper is not aligned with the pole line but does not exceed 50 cm in either direction: 10-point deduction. After stopping, if the starting time exceeds 30 seconds: 100-point deduction. Wheels crossing the road edge line while driving: 100-point deduction. Rolling back more than 30 cm when starting: 100-point deduction. After stopping, if the vehicle body is more than 50 cm from the road edge line: 100-point deduction. After parking, if the parking brake is not fully engaged: 10-point deduction per occurrence. After stopping, if the vehicle body is more than 30 cm but not exceeding 50 cm from the road edge line: 10-point deduction per occurrence. Rolling back more than 10 cm but less than 30 cm when starting: 5-point deduction per occurrence. Parallel parking: After parking, if the vehicle body crosses the line: 100-point deduction. Not using or incorrectly using the turn signal when parking: 10-point deduction. Exceeding the 90-second time limit for the task: 100-point deduction. Touching the parking space edge line with the vehicle body while driving: 10-point deduction per occurrence. Wheels touching the lane edge line while driving: 10-point deduction per occurrence. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. 90-degree turn: Wheels crossing the road edge line: 100-point deduction. Not using or incorrectly using the turn signal during the turn, or not turning off the turn signal after the turn: 10-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Curve driving: Wheels crossing the road edge line: 100-point deduction. Stopping for more than 2 seconds midway: 100-point deduction. Driving without the gear in second or higher: 5-point deduction.
Was this review help?
9
3
Share
More Forum Discussions

How many points will be deducted for not meeting vehicles according to regulations while driving?

Not meeting vehicles according to regulations will result in a 1-point deduction and a fine of 200 yuan. Additional information about meeting vehicles: Right-of-way rules for meeting vehicles: The right-of-way rules for meeting vehicles state that turning vehicles must yield to vehicles going straight, vehicles coming from the right have the right of way, and right-turning vehicles must yield to left-turning vehicles. When facing a meeting vehicle sign, the upward arrow represents yourself. If your arrow is large (black or white), it means you have the right of way (you go first); if your arrow is small (red), it means you must yield (others go first). Regulations regarding meeting vehicles: When there are traffic signs or markings, yield to the party with priority; when there are no traffic signs or markings, stop before entering the intersection to observe and yield to vehicles coming from the right; turning vehicles must yield to vehicles going straight; right-turning vehicles from the opposite direction must yield to left-turning vehicles.
13
5
Share

How long does it take for a speeding violation to appear on 12123?

Speeding violations on highways typically appear on 12123 within 3 to 13 days. Local violations are usually processed within 7 days, while out-of-area violations may take up to 15 days. Functions of 12123: Binding personal vehicles and driver's licenses; Processing traffic violations recorded by electronic monitoring devices; Appointment scheduling for driver's license tests; Pre-selection of license plates for new vehicles; Replacement and renewal of vehicle registration certificates, license plates, and driver's licenses, as well as replacement of vehicle safety inspection stickers; Extension of driver's license renewal, inspection, and submission of physical condition certificates; Inquiry and notification of vehicle and driver's license-related information; Navigation to traffic management service locations; Online self-service for traffic violation processing. Penalty points for speeding on highways: Generally, speeding less than 10% on highways or national roads results in a warning without penalty points or fines, and no need for further processing; Speeding between 10% and 20% incurs 3 penalty points and a fine; Speeding between 20% and 50% results in 6 penalty points and a fine; Speeding over 50% leads to an immediate 12-point deduction and a fine, with the fine amount doubling as the speeding percentage increases, up to 100% or more.
20
2
Share

How many kilometers per hour is 1 mile?

"Mile" refers to the English word "mile," which means a unit of distance. According to unit conversion, 1 mile = 1609 meters, which is 1.609 kilometers. Representation of mile: Many Mercedes-Benz and BMW car owners often prefer to use "mile" to indicate speed. However, in reality, "mile" is a unit of distance, similar to "kilometer." Therefore, the correct expression should be "miles per hour" (mail/h; MPH). Conversion of mile: 120 kilometers per hour = 75 miles per hour; 100 kilometers per hour = 62.5 miles per hour; 80 kilometers per hour = 50 miles per hour; 70 kilometers per hour = 43.75 miles per hour.
1
1
Share

Do 4S shops provide maintenance services during National Day?

Maintenance services are available during the National Day holiday, as most car maintenance shops remain open. Professional technicians will be on duty. It is advisable to choose an official 4S shop for maintenance services. Although the prices may be slightly higher, the quality is guaranteed. Introduction to car maintenance: Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Maintenance content: Modern car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.
9
5
Share

What are the evaluation criteria for the October new regulation Subject 3 driving test?

The evaluation criteria for the October new regulation Subject 3 driving test are as follows: Standards for failing the test: Failure to use seat belts as required; obstructing or turning off in-vehicle audio/video monitoring equipment; not following the examiner's instructions; inability to correctly use vehicle controls such as lights and windshield wipers; not placing the gear in neutral (parking gear) when starting the engine; failing to start within 10 seconds when the traffic light turns green and there are no vehicles or pedestrians ahead affecting passage; the vehicle rolling backward more than 30cm during startup; both hands leaving the steering wheel while driving; inability to effectively control the direction of travel with one hand on the steering wheel; inaccurate control of the vehicle's direction, with the vehicle swaying or deviating from the correct path; inability to reasonably choose driving lanes or adjust speed according to traffic conditions. Standards for deducting 10 points: Incorrect driving posture; the vehicle rolling backward during startup, but less than 30cm; improper steering wheel handling; selecting the wrong gear during startup or driving and failing to correct it promptly; turning or returning the steering wheel too early or too late during a turn, or with excessive or insufficient steering angle; gear grinding during gear shifting; inability to reasonably use the clutch to control speed when necessary; causing the engine to stall once due to improper operation; inability to use the horn reasonably according to traffic conditions; uneven braking; failure to yield as required when the following vehicle signals to overtake, etc.
18
2
Share

When to Turn on the Car's Recirculation Mode?

Car's recirculation mode is generally turned on when you need to quickly cool down or heat up the interior, preventing external cold air or hot wind from entering the cabin. It is also used when the external air quality is poor, such as in traffic jams where there is a lot of exhaust fumes, or during dusty and hazy weather, to prevent pollutants from entering the car. Definition of Car's Recirculation Mode: Recirculation mode means the air blown by the blower circulates only inside the car. Since no external air is involved, it has the advantages of saving fuel and faster cooling or heating, but the disadvantage is that it does not facilitate the renewal of the cabin air. Difference Between Recirculation Mode and Fresh Air Mode: Different principles: recirculation mode circulates the air inside the car in a closed environment, while fresh air mode brings external air into the cabin. Different locations: the air intake for recirculation mode is inside the car, preventing outside air from entering, while the air intake for fresh air mode is located below the front windshield wiper, drawing in external air. Different effects: prolonged use of recirculation mode can lead to stale air, decreased oxygen levels, causing discomfort, fatigue, anxiety, and affecting driving safety; fresh air mode ensures air circulation between the inside and outside of the car, preventing excessive carbon dioxide concentration.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.