···
Log in / Register

Does crossing the line during a yellow light count as running a red light?

1 Answers
EthanAnn
07/24/25 7:09pm

According to Article 38 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China, when the yellow light at an intersection is flashing, vehicles that have already crossed the stop line may continue to pass. If the yellow light is already on and you continue to force your way through, being caught by a camera in this situation will also count as running a red light. According to the relevant provisions in Article 10 of the Regulations on the Handling Procedures for Road Traffic Safety Violations, motor vehicle drivers who violate traffic signal lights at intersections will be penalized with 6 points. Additionally, according to the relevant provisions in Article 90 of the Road Traffic Safety Law, a fine may also be imposed. Criteria for determining running a red light: Electronic eyes will take three photos as the basis for determining a red light violation: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered running a red light. According to Article 11 of the Regulations on the Handling Procedures for Road Traffic Safety Violations, if you cross the stop line when the red light is on but manage to stop the vehicle even if you have already crossed the line, it will not be considered running a red light. However, it will be considered stopping beyond the line, and according to traffic laws, this is classified as driving or stopping at an intersection not in accordance with regulations, resulting in a 3-point penalty. How to avoid running a red light while driving: When there are arrow signal lights, follow the arrow lights; otherwise, follow the circular lights; When the red light is on, the front of the vehicle must not cross the stop line; When the yellow light is on, the front of the vehicle must not cross the stop line; When the green light just flashes, if you are close and moving fast, you should pass because you might not be able to stop in time and cross the stop line; if you are far away, moving slowly, or the intersection is congested, you should stop; When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk or stop line, or encounter an intersection.

Was this review help?
12
5
Share
More Forum Discussions

What is the fuel tank capacity of a Xiali in liters?

The fuel tank capacity of a Xiali is 37 liters, as officially announced. Owners who have purchased a Xiali can also check this information on the vehicle's configuration sheet. The recommended fuel grade for Xiali is 92 octane, with a fuel consumption of 6.1L per 100 kilometers. A full tank can cover a distance of approximately 607 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, leaving some space between the safe fill level and the tank opening. This space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
15
1
Share

What Causes the Loud Noise from the Car Fan?

The loud noise from the car fan is mainly caused by three reasons. Below is a detailed explanation of these three causes: 1. Exhaust fan blades: The exhaust fan, driven by an electric motor, rotates the blades to drive airflow, facilitating air exchange between indoor and outdoor environments as part of an air conditioning appliance. When the blades of the exhaust fan inside the air conditioner become deformed, it can result in a louder noise, and it is recommended to replace the exhaust fan. 2. Exhaust fan motor: The purpose of exhaust is to remove stale indoor air and regulate temperature, humidity, and comfort. If the motor of the exhaust fan inside the air conditioner is damaged, it can lead to a louder noise, and it is recommended to replace the exhaust fan. 3. Excessive debris: If there is a significant amount of debris inside the air conditioner, it is advisable to clean the air conditioner.
15
4
Share

Where to Place the ETC Tag?

The ETC installation position is generally in the upper middle part of the front windshield horizontally, while for large vehicles such as trucks and buses, the installation position is in the lower middle part. The suitable installation position should be at a height of no less than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof films, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave skylight strip. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply, the vehicle owner must provide original and photocopies of their valid ID card and vehicle registration certificate. If the application is made by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls is required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Documents required for company vehicles: An introduction letter from the vehicle owner (with official seal); photocopy of the organization code certificate or business license (with official seal); original ID card of the proxy; original vehicle registration certificate; the vehicle for which ETC is to be applied. Below are the precautions for ETC installation: Do not obstruct the driver's view; it is best to install it behind the rearview mirror: Many car models have a large tilt angle of the windshield, resulting in a smaller driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spot. Install it behind the rearview mirror on the right side to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it randomly once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. Once the electronic tag is installed on the windshield, the anti-removal lever will be pressed in. If removed randomly, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Points to note when using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic toll deduction for the wrong vehicle; the recognition speed for ETC lanes is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information and toll deduction failure; when using a debit card linked to ETC, insufficient balance may also cause toll deduction failure.
1
0
Share

How much is the fine and how many points are deducted for speeding 80% over the limit?

Speeding 80% over the limit: According to the "Scoring Standards for Road Traffic Violations," driving 50% or more over the speed limit results in 12 penalty points and a fine. Below is extended information about vehicle speed: 1. Concept of Vehicle Speed: Vehicle speed generally refers to the speed of a moving car. It indicates the distance a car travels per unit of time, commonly measured in kilometers per hour or meters per second. 2. Spot Speed: Spot speed is the instantaneous speed of a car passing a specific point on the road. The arithmetic mean of a set of spot speed observations is the average spot speed. Spot speed is widely used in traffic engineering as a basis for setting road design speeds, installing traffic control facilities, determining traffic management methods, implementing traffic improvement measures and their economic analysis, exploring speed trends of various vehicle types, and evaluating the effectiveness of road traffic facilities, traffic management, and improvement measures.
10
2
Share

How to Use the Handbrake, Lift or Lower?

When starting, the handbrake needs to be lowered, and when parking, the handbrake needs to be pulled up. Additional Information: 1. Remember to Engage the Handbrake When Parking: Some drivers forget to engage the handbrake after parking, resulting in the car moving without a driver and causing accidents. Especially on slopes, ensure the car is in gear and the handbrake is engaged, waiting for the vehicle to stabilize before exiting. 2. Handbrake is Often Used in Conjunction with Neutral Gear: Even during brief stops like at red lights, engaging the handbrake can prevent the car from rolling on uneven roads and give your right foot a short break. Use nearby stationary objects as a reference to check for any movement. 3. Lower the Handbrake When Starting: When starting the car, make sure to lower the handbrake. Remember to press the button and ensure it is fully lowered. Many beginners forget to release the handbrake, which can cause damage to it.
1
3
Share

What is the difference between polo-sport and polo?

polo-sport and polo have the following differences: polo-sport is a clothing brand under the U.S. Polo Association; polo is a compact car under Volkswagen. Additional information about the Volkswagen polo is as follows: 1. Body dimensions: length 3970mm, width 1682mm, height 1462mm, wheelbase 2470mm. 2. Fuel consumption: 6.5L-8.8L. 3. Engine type: turbocharged (TSI), naturally aspirated. 4. Braking system: disc brakes (front wheels), drum brakes (rear wheels).
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.