Does Changing Spark Plugs Outside the 4S Store Affect Warranty?

1 Answers
LilaFitz
07/25/25 10:47am
Changing spark plugs outside the 4S store does not affect the warranty. If the spark plugs are within the warranty period, you can replace them at the 4S store or do it yourself. The specific replacement steps are as follows: Open the engine hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any leaves, dust, or debris on the outside and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage distributor wires according to the firing order and secure the cover. Spark Plug Replacement Interval: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the user manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced every 40,000 kilometers, standard nickel alloy spark plugs every 20,000 kilometers, and iridium spark plugs every 60,000 to 80,000 kilometers.
Was this review help?
1
3
Share
More Forum Discussions

Will an A2 driver's license be downgraded if 12 points are deducted at once?

According to previous regulations, a driver's license would be downgraded if 12 points were deducted. However, with the implementation of the new regulations on April 1, 2022, holders of an A2 driver's license who accumulate 12 points in a single scoring cycle will no longer face downgrading. Instead, the license holder must participate in the study and examination of Subject 1 to clear the violation points and retrieve their driver's license. The A2 license allows the holder to drive tractor-trailers, which can tow heavy and medium-sized full trailers or semi-trailers. Here, I would like to explain what a trailer is. Trailers are divided into two types: full trailers and semi-trailers. A full trailer bears its total weight entirely on its own, while a semi-trailer shares part of its total weight with the towing vehicle. Only drivers with an A2 license can operate such tractor-trailers; even those with an A1 license are not permitted to drive them. To downgrade an A2 driver's license, the holder must visit the local vehicle management office with their ID card and driver's license. The A2 license will be downgraded to a B1 or B2 license (i.e., B1 or B2 driver's license). The A2 license corresponds to tractor-trailers, the B1 license to medium-sized passenger vehicles, and the B2 license to large trucks. Other vehicle types that an A2 license holder can drive include: B1 (medium-sized passenger vehicles), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery). Article 68 of the new traffic regulations states: If a driver holding a license for large passenger vehicles, tractor-trailers, city buses, medium-sized passenger vehicles, or large trucks falls under any of the following circumstances, the vehicle management office shall revoke their highest permitted driving qualification and notify the driver to complete the downgrade and license replacement within 30 days: 1. Being involved in a traffic accident resulting in death and bearing equal or greater responsibility, without constituting a crime. 2. Accumulating 12 points in a single scoring cycle. 3. Failing to undergo inspection for three consecutive scoring cycles. The full name of a driver's license is a motor vehicle driver's license, also referred to as a "driver's license." It is a certificate required by law for individuals to operate motor vehicles. Driving a motor vehicle requires certain skills. Without these skills, driving recklessly could lead to traffic accidents. Generally, unlicensed individuals are not allowed to drive on the road. However, for those who have mastered safe driving techniques, the document permitting them to drive on the road is the "driver's license." This indicates that a driver's license is a "permit." The permission to drive a vehicle is granted through the issuance of a driver's license. This shows that obtaining a driver's license is a formal process that must be conducted by a specialized authority. Internationally, a driver's license is defined as: "A document issued by the competent authority permitting the holder to drive a motor vehicle." In China, a driver's license is defined as: A motor vehicle driver's license is a legal document issued by the management authority to individuals who have learned to drive motor vehicles, mastered traffic regulations and driving techniques, and passed the required examinations, permitting them to drive specific types of motor vehicles.
1
5
Share

What is the normal fuel consumption per 100 kilometers for a sedan?

Generally, for micro cars with small displacements around 1L, the fuel consumption per 100 kilometers is about 4-5 liters; for compact cars with displacements of 1.5-1.6L, the fuel consumption is about 6-8 liters; for mid-size cars with displacements of 1.8-2.0L, the fuel consumption is about 8-12 liters; for large cars with displacements of 2.5-4.0L, the fuel consumption is about 12-18 liters. Below is an introduction to car fuel consumption: 1. Introduction: Constant-speed fuel consumption refers to the fuel economy indicator when a car is driving at a constant speed on a good road surface. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. 2. Calculation Method: Mount the engine on a test bench, control the ambient temperature, use an electric fan to blow air from the front, and apply a water load at the back to simulate the driving state of the car. 3. Influencing Factors: Automotive technology is advancing rapidly. If you compare the fuel consumption of current cars with that of past models, you can immediately see the significant impact of technological advancements on reducing fuel consumption.
13
5
Share

What to Do If You Purchase a Stock Vehicle?

Due to the lack of a clear definition for stock vehicles in regulations such as the automotive three-guarantee policy, it can be somewhat challenging for consumers to request a refund or exchange if they purchase a stock vehicle. If a 4S store intentionally conceals information or claims the vehicle is a new car less than a year old, but upon delivery, the consumer discovers it is over a year old or even older, this constitutes fraudulent behavior. In such cases, the consumer is entitled to demand additional compensation for their losses, with the compensation amount being three times the price of the purchased product or service. Stock vehicles have the following disadvantages: 1. Tire deformation: Prolonged parking can cause deformation in the tires in contact with the ground, leading to premature wear and an increased risk of blowouts when driven. 2. Fluid deterioration: Fluids may deteriorate, and using them under unclear conditions could cause irreversible damage to the engine. 3. Battery depletion: Vehicles left unused for extended periods may suffer from prolonged battery depletion, potentially leading to early battery failure. 4. Paint aging: Most stock vehicles are stored outdoors, where exposure to sunlight accelerates the aging of the vehicle's paint and rubber seals, rain may cause moisture damage to electronic components, and dust can clog various cooling systems and drainage holes.
8
5
Share

Does the Dash Cam Record When the Car is Parked?

During the day, the dash cam operates using the car's electrical power. Once the vehicle is turned off and the power is cut, the dash cam will stop working. Its roles and functions are as follows: Roles: After installing a dash cam, it can record video images and audio of the entire driving process, providing evidence in case of traffic accidents. For those who enjoy road trips, it can document the journey through challenging terrains. It continuously records while driving, capturing time, speed, and location in the footage, much like a black box. Functions: Preventing fraud, providing evidence in traffic accidents, recording driving experiences, and navigation.
20
2
Share

What is BCM?

Automotive BCM stands for Body Control Module. Below is relevant information about BCM: Functions of BCM: The functions of Body Control Module (BCM) include electric window control, central door lock control, remote anti-theft, lighting system control, electric mirror heating control, instrument backlight adjustment, power distribution, etc. Other functions: The Body Control Module (BCM) coordinates different functions within the vehicle through signals. It manages numerous vehicle functions including door locks, alarm sound control, interior and exterior lighting, safety features, wipers, turn indicators, and power management. Integrated into the vehicle's electronic architecture, the BCM provides maximized reliability and cost-effectiveness while reducing the number of required plug connections and cable harnesses.
9
1
Share

Should the sunroof be tinted?

Car sunroofs can be tinted or left untinted, as the material used for sunroofs is inherently black. Here are some considerations regarding tinting: Considerations: After tinting your car windows, avoid rolling them up or down for 3 days in summer and 7 days in winter. Freshly tinted windows have tight glass, and the edges of the tint film may peel or lift during window operation, damaging the film. Functions: Car window tinting helps block UV rays, reduce heat, and prevent injuries from sudden glass shattering. Additionally, the one-way visibility feature of solar films serves to protect personal privacy.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.