Does changing motorcycle engine oil save fuel?

1 Answers
MacMason
07/30/25 12:34am
Changing motorcycle engine oil does not save fuel. Regular maintenance can reduce fuel consumption: Performing regular maintenance can decrease vehicle failure rates and also reduce fuel consumption. Scheduled replacement of components such as spark plugs, oil filters, brake fluid, radiator coolant, air filters, power steering fluid, and transmission fluid helps keep the vehicle in optimal condition, thereby reducing fuel consumption. Avoid aggressive throttle inputs: Aggressive throttle usage only shortens driving time by about 4%, but increases fuel consumption by 37-40%. On typical urban roads, speeds are usually maintained around 50 km/h with engine RPM between 2000-2500. On highways, speeds generally range between 90-110 km/h - every 10 km/h increase in speed raises fuel consumption by 10%. Avoid aggressive throttle inputs because engine RPM is the most significant factor affecting fuel consumption.
Was this review help?
19
4
Share
More Forum Discussions

What to Do When a Vehicle Stalls Due to Road Flooding from Heavy Rain?

You should immediately exit the vehicle and move to higher ground or push the car out of the water. Below is relevant information about stalling: 1. Causes of stalling: Automatic transmission models: Vehicles with automatic transmission do not stall easily, while manual transmission models may stall frequently due to poor driving skills. However, it is not impossible for automatic transmission vehicles to stall, which is usually caused by using low-quality fuel leading to engine carbon buildup and stalling. 2. Precautions: For automatic transmission vehicles stalling, the main cause is the use of low-quality fuel. One solution is to fill up with higher-grade fuel at reputable, larger gas stations, such as using 97-octane gasoline. Although it is more expensive, it can ensure a longer lifespan for your vehicle and better performance while driving.
14
2
Share

What is the difference between car maintenance at a 4S shop and outside?

The differences between car maintenance at a 4S shop and outside are as follows: 1. Different reliability: Maintenance at a 4S shop is more reliable because 4S shops communicate with car manufacturers and have a better understanding of the vehicle model. They are equipped with corresponding tools for the specific model, and the replacement parts used in 4S shops are generally genuine, ensuring reliability. The overall skill level of technicians is also relatively professional. In contrast, maintenance at repair shops has the most prominent advantage of lower prices, and the speed of maintenance or repairs is relatively faster. You can choose the engine oil yourself or even purchase it online and pay a service fee for the repair shop to perform the maintenance. During the process, you can also "supervise" the work. However, the drawbacks are also obvious: the technical level of repair shops varies compared to 4S shops, and there is a lack of a comprehensive supervision system. 2. Different prices: Maintenance at a 4S shop is more secure but more expensive, while maintenance at auto repair shops is cheaper but carries higher risks.
1
3
Share

What does the yellow exclamation mark warning light indicate?

Yellow triangle exclamation mark represents the traction control system malfunction indicator. Here are the details: 1. Description: When the information center warning light illuminates, it indicates the system has detected a malfunction or abnormality. The multifunction display on the right side of the instrument cluster shows different warning symbols - a yellow exclamation mark in brackets indicates tire pressure warning, while a yellow exclamation mark inside a gear-shaped circle indicates automatic transmission fault. The traction control system light, when illuminated, means the system is deactivated. If this light stays on when the system is engaged, it signifies a TCS issue. Immediate inspection is required when warning lights appear. 2. Potential faults: May include heavy steering, overloaded steering system operation, internal steering gear wear, or steering system oil leakage.
18
4
Share

Press the Accelerator First or Shift Gears First?

Press the accelerator first before shifting gears. Gear shifting is the abbreviation for "gear lever operation method," referring to the driver's psychological and physiological movements to continuously adjust the gear lever position based on road conditions and vehicle speed changes. Below is relevant knowledge about gear shifting: 1. Manual transmission gear shifting: For manual transmission vehicles, the clutch's importance cannot be overlooked for smooth driving. Except when starting, shifting gears, or braking at low speeds, avoid unnecessarily pressing the clutch pedal or resting your foot on it. 2. Automatic transmission gear shifting: Automatic transmission gear shifting is controlled by a computer, making operation simple.
8
1
Share

What is the difference between B2 and B1 driver's licenses?

B2 and B1 driver's licenses differ in the types of vehicles they permit to drive and the application requirements. The specific details are as follows: 1. Difference: Both B1 and B2 driver's licenses must be applied for at the local vehicle management office in the applicant's registered residence. However, B2 can be applied for directly, while B1 requires the applicant to first hold another driver's license and then apply for an additional license to obtain it. 2. The types of vehicles permitted by a B1 license are: medium-sized buses and C1, M (M stands for wheeled self-propelled machinery). This includes urban buses with 10 to 19 passengers. 3. The types of vehicles permitted by a B2 license are: large trucks and C1, M. A B2 license allows the holder to drive heavy and medium-sized trucks, large, heavy, and medium-sized special operation vehicles, as well as small vehicles under the C1 and M categories.
3
5
Share

What is the reason why one of the two fans in the Magotan is not working?

Introduction to the reasons why one of the two fans in the Magotan is not working: 1. Whether the water temperature meets the requirements: Most of today's car radiator fans operate electronically with temperature control. Therefore, the fan will only start rotating normally when the water temperature inside the car reaches the required temperature. If the temperature is too low, the radiator fan will not rotate. Therefore, when the car radiator fan fails to rotate, the first thing to check is whether the water temperature meets the requirements. 2. Relay failure: It may be an issue with the fan's relay. If the relay fails, the car's radiator fan will not work. 3. Problems with the temperature control switch: If there are no issues with the above two aspects, then the temperature control switch should be checked. Sometimes, faults can occur in this area, which can also affect the operation of the car radiator fan. Therefore, it should also be checked carefully.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.