Does changing from dark blue to light blue require registration?

2 Answers
MarleyAnn
07/24/25 9:16am
Vehicle color changes require registration at the vehicle management office. Here is the relevant information: 1. Applying a color-changing film to a car requires registration at the vehicle management office: According to current motor vehicle registration regulations, if the area of the color change does not exceed 30% of the vehicle's surface, no vehicle modification registration is required. If the color change area exceeds 30%, registration at the vehicle management office is mandatory, and the new color must be one that was originally registered when the vehicle left the factory. 2. There are two main methods for changing a car's color: (1) Full-body repainting. (2) Applying a film. Between these two methods, applying a film is more recommended because full-body repainting involves a larger workload and makes future color changes more complicated. Applying a film allows for color changes without damaging the original paint, has lower replacement costs, and also provides some protective benefits.
Was this review help?
20
5
Share
AlainaDella
08/11/25 4:42am
I've been handling car color changes for over a decade. Changing from dark blue to light blue may seem like staying within the blue spectrum, but the tonal shift is significant. According to traffic regulations, you must register this modification—otherwise, you risk a fine of 100-200 yuan and penalty points if caught on the road. I recall one customer who skipped the registration and got stuck during annual inspection, costing several days of rework. The registration process is simple: visit the DMV with your ID and vehicle license, fill out a form, take a photo, and it's done in about ten minutes for just a few dozen yuan. If the color change exceeds 30% difference, it should be registered to avoid hassle and potential safety issues—light blue, for instance, is less visible than dark blue in fog, increasing accident risks. Daily advice to fellow car enthusiasts: always check official regulations before repainting for peace of mind. Post-registration, driving your 'new' car is both safe and legal, preventing unexpected costs that could add up.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

How to Determine Whether to Change Transmission Fluid?

Methods to determine if transmission fluid needs replacement are: 1. Manual transmission fluid should be changed every 40,000 kilometers or 2 years, while automatic transmission fluid should be changed every 60,000 kilometers or 3 years; 2. Judge whether the transmission fluid needs replacement by daily shifting experience. When you feel the gear shifting becomes stiff or unsmooth, accompanied by transmission noise, vehicle shaking, or slow acceleration, it indicates the transmission fluid needs changing. More details are as follows: 1. Transmission fluid is an oil product that keeps the shifting system clean, ensuring normal operation of the transmission and extending the lifespan of the transmission components. 2. Depending on the transmission structure, transmission fluid is divided into automatic transmission fluid and manual transmission fluid. 3. Automatic transmission fluid is specifically designed for automatic transmissions, serving as both the hydraulic fluid for the torque converter and the lubricant for the planetary gear structure and shifting mechanism. 4. Manual transmission fluid is generally referred to as gear oil, used for lubricating spur and bevel gears, as well as gears in transmissions and steering mechanisms under normal load conditions.
5
1
Share

How many points are deducted for the vehicle body crossing the line during parallel parking?

After the vehicle stops in the parking space, if the vehicle body crosses the line, 100 points will be deducted. The difficulty of the new regulation is that there are no poles to identify, and no pauses are allowed. The purpose of the test is to assess the driver's ability to correctly park the vehicle in the right-side parking space on the road. Here are the key points about parking: 1. Slowly move parallel along the parking space, and stop when pole No. 1 appears in the rear window; 2. Shift into reverse gear, honk once, turn on the right turn signal, and prepare to reverse into the space; 3. When reversing, when the center of the small triangle in the right rear window is parallel to pole No. 1, turn the steering wheel one and a half turns to the right, and immediately look at the left rearview mirror; 4. When both sides of the front of the vehicle are between poles No. 1 and No. 2, stop (there is no need to straighten the steering wheel, maintain the position when parking).
16
4
Share

Where is the tire pressure reset button located on the GS4?

The tire pressure reset button for the Trumpchi GS4 is located on the steering wheel, at the far left position of the combination switch. The tire pressure monitoring for the Trumpchi GS4 can be viewed on the dashboard. The vehicle comes equipped with a tire pressure monitoring system that automatically alerts the driver, requiring no manual operation. Lower trim models do not come with this feature as standard and require aftermarket installation. More details are as follows: 1. Many accidents on highways are caused by tire blowouts, making it essential to have a tire pressure monitoring system to check if the tire pressure is normal in advance. Adding a tire pressure monitoring configuration to your car is highly recommended to prevent serious consequences from unnoticed tire leaks. 2. External sensors measure the internal tire pressure through the valve stem. However, since tires are in high-speed motion, the convection speed of the gas is rapid. Therefore, the temperature parameters measured by external tire pressure monitors are indeed less accurate than those of built-in monitors. 3. In terms of measurement accuracy, since both external and internal types use the same tire pressure monitoring solutions, there is no difference in the accuracy of tire pressure measurements between the two.
16
0
Share

Is it advisable to park in waterlogged sections?

It is best not to park in waterlogged sections to avoid severe consequences such as engine stalling due to water ingress. Below are some tips for driving through waterlogged areas during rainy weather: 1. Encountering water accumulation: Slow down or stop to observe. If the water level reaches two-thirds of the bumper or tire height, proceeding poses certain risks. Higher speeds increase the actual water depth the vehicle traverses, potentially allowing water to enter the cabin through the engine compartment or chassis. 2. Key precautions: Avoid stopping, shifting gears, or releasing the throttle. Do not accelerate; instead, maintain a steady speed in low gear with moderate to high throttle. Avoid driving too fast, which can create large waves or splashes. 3. If the engine stalls, do not attempt to restart it immediately: Quickly move the vehicle to a safer location with less water accumulation. Severe water ingress can allow water to enter the engine through the air filter and intake valve, proceeding into the cylinders via the intake manifold. Attempting to restart the engine may cause deformation of critical components like the crankshaft and connecting rods, leading to engine vibration or even component breakage.
7
2
Share

What is the difference between Pirelli P1 and P6?

The differences between Pirelli P1 and P6 are as follows: 1. The rolling resistance of P6 is lower than that of P1, and lower rolling resistance means better fuel efficiency. 2. Pirelli P1 is a high-performance tire that offers safety and wear resistance. It uses high-performance hybrid materials and an asymmetric tread pattern design, which not only improves the tire's wear resistance and grip but also enhances its drainage capability to some extent. Additionally, the new Pirelli P1 features a five-layer crown structure, consisting of two layers of steel wire, two layers of polyester fiber, and one layer of IKEA polyamide (nylon), while the sidewall has two layers of polyester fiber, effectively preventing severe wear caused by tire bulging. 3. Pirelli P6 is a high-performance tire that prioritizes comfort and fuel efficiency. It employs a unique tread compound combined with a new vulcanization process to reduce rolling resistance, significantly improving the vehicle's fuel economy. Furthermore, its specially designed audio tuning pattern effectively reduces tire noise during driving, providing a more comfortable driving experience.
16
5
Share

What are the considerations for applying a gecko sticker to the rear of a car?

There are no specific methods for applying a gecko sticker to the rear of a car. You just need to align the position first and then stick it directly. You can hold the gecko sticker to check the position. The reasons for applying a gecko sticker to the rear of a car are as follows: 1. Auspicious homophony. The homophonic meaning of 'gecko' in Chinese is 'protection' or 'avoiding misfortune,' hoping to gain protection or avoid misfortune. This is why people stick a 'gecko' on the rear of their cars, believing that traffic violations and accidents will stay away, which also benefits driving safety. 2. Mascot. The gecko is also known as 'Shou Gong' in Chinese, and in traditional Chinese culture, it is called 'Tian Long' (Heavenly Dragon). It is considered a mascot by the folk to ward off evil spirits and bring prosperity to the family. 3. Strong ground adhesion. Geckos walk on dangerous walls relying on the strong adhesion of their limbs. At the same time, the gecko emblem originally represented Audi's quattro all-wheel-drive logo on Audi cars, symbolizing the vehicle's strong ground adhesion similar to that of a gecko. 4. Reminder for the following car. Geckos are reptiles, and their crawling speed is slow. Using the crawling speed of a gecko to represent the vehicle's own driving speed is intended to remind the driver behind to pay attention to the speed and drive carefully.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.