Does Car Waxing Damage the Paint?

1 Answers
SanFelix
07/30/25 12:49am
Car waxing does not damage the paint. However, excessive polishing and waxing can harm the paint. This is because there is a protective layer on the paint, approximately only 0.5mm thick. Each polishing session thins this protective layer, and improper operation can easily expose the primer. Therefore, it is not recommended to perform polishing and waxing too frequently. Benefits of waxing: Waterproofing effect, reducing watermarks, dark spots, rust, and damage on the paint surface; Anti-aging effect, reducing UV damage to the paint and extending the paint's lifespan; Gloss enhancement, improving the paint's smoothness to varying degrees and making the car's color more vibrant; Anti-static effect, reducing damage caused by friction with dust, wool fabrics, and synthetic fibers in the air; Anti-corrosion effect, effectively isolating damage from acid rain and acid mist to the paint. Car waxing cycle: For cars frequently parked indoors, waxing once every 4 months is sufficient; for cars frequently parked outdoors, waxing once every 2 months is sufficient. Since car wax generally lasts for a short time, usually around 1-2 months, waxing can be performed when the body feels rough to the touch or shows imperfections.
Was this review help?
12
2
Share
More Forum Discussions

Reasons why the Audi Q3's fan keeps running after starting the car?

Fan keeps running due to high temperature. Possible reasons for the fan continuously running: This is normal. Because the engine temperature remains high after shutdown, the onboard computer continues monitoring and keeps the fan running to reduce temperature. Generally, if the vehicle has been driven for a long time, it's best to let it idle for a while after parking to allow mechanical temperatures to decrease before turning off the engine. Regardless of the vehicle's horsepower, idling consumes minimal fuel. If the fan is still operating, it indicates the mechanical components haven't cooled to the designated safe temperature. Potential fan malfunctions: Blockage in the cooling circuit causing slow heat dissipation, which makes the fan continue working. If this occurs after only short-distance driving and the fan doesn't stop for a long time, the vehicle should be inspected at a 4S shop. However, if you've driven hundreds of kilometers, this is normal behavior. While the radiator temperature may be normal, the coolant temperature sensor on the engine shows high engine temperature, requiring extended fan operation for cooling.
12
4
Share

Why does the engine speed increase when going downhill?

When going downhill, the high engine speed is due to the potential energy gained from gravitational acceleration as the vehicle moves from a higher to a lower elevation. Even without pressing the accelerator, the vehicle will accelerate downhill. However, the engine's reverse traction force will slow the vehicle down. When the slope is steep, the gravitational acceleration acting on the vehicle exceeds the engine's reverse traction force in the current gear, causing the engine speed to rise. Here are some precautions to take when going downhill: Do not rely solely on low gear to control speed: To avoid overheating the brake pads from prolonged braking, engine braking is used, but this does not mean you should avoid using the brakes altogether. Even if the gear is set to a low position, if the downhill slope is steep or long, the engine speed may still be forced to increase. In such cases, you should use the brakes to assist in slowing down. Engine braking in automatic transmission vehicles: For automatic transmissions, engine braking requires shifting to L (Low) or S (Sport) mode in manual mode to effectively utilize the engine's braking force.
9
3
Share

At What Age Can Children Sit in the Front Seat of a Car?

China has explicitly stipulated that minors under the age of 12 are not allowed to sit in the front passenger seat. Although the front passenger seat offers a wide field of vision and relatively less vibration, it poses extremely high risks. Traffic accidents are the leading cause of death for children under 14 in China. Specific regulations: Even parents holding children are not permitted to sit in the front passenger seat, and child safety seats cannot be installed there. If passengers in the front seat fail to fasten their seat belts while driving on highways or urban expressways, they will be fined and required to correct the behavior upon being caught by electronic surveillance or on-site inspection. Correct practices for children in cars: For children, the rear seats of a car are safer than the front seats. The middle seat in the rear is the optimal position for installing a child safety seat. For older children (typically no younger than 7-8 years) who need to use a three-point seat belt, it is advisable to use a booster seat.
16
1
Share

Are there multiple-choice questions added to Subject 1?

There are no multiple-choice questions in the Subject 1 exam. Below is more information about Subject 1: Subject 1 Exam Question Types: The total time for the Subject 1 exam is 45 minutes. The exam consists of 100 questions, which are true/false and single-choice questions. The full score is 100, and a passing score is 90. The exam papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations." Subject 1 Exam Precautions: Follow the instructions of the staff and collect your driving training file in order in the waiting area. Bring and present your ID card for verification by the supervising officer. Mobile phones must be turned off when entering the exam area. Loud noise is prohibited in the exam area. Law textbooks are not allowed in the exam area (or should be placed in your bag). After the exam, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the exam area.
5
1
Share

Why does the Audi A6 show insufficient tire pressure?

Audi A6 displaying insufficient tire pressure may be due to changes in the standard tire pressure, or it could be caused by air leakage or tire punctures. After inspection and repair, adjustments need to be made through the MMI system in the Audi vehicle. Relevant details are as follows: Abnormal tire pressure: Generally, an alarm will be triggered if the pressure is below 1.8 bar or exceeds 3.0 bar. In such cases, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset: If the tire pressure is not reset promptly after inflation, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also cause the tire pressure warning light to illuminate. For sensor damage issues, the only solution is to replace it with a new component.
2
4
Share

What is the emission standard of the Baojun 310W?

The Baojun 310W meets the China VI emission standard. China VI is a standard established to prevent environmental pollution caused by exhaust emissions from compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. The China VI emission standards are as follows: 1. Carbon monoxide emission content is 700mg; 2. Non-methane hydrocarbon emission content is 68mg; 3. Nitrogen oxide emission content is 60mg; 4. Particulate matter emission content is 4.5mg. The Baojun 310W is a compact car launched by SAIC-GM-Wuling. Taking the Baojun 310W 2020 Automatic Enjoyment model as an example, its body dimensions are: length 4620mm, width 1710mm, height 1535mm, wheelbase 2750mm, and fuel tank capacity 40 liters.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.