Does Canceling the Subject One Exam Reservation Have Any Impact?

What is the Rear Cross Traffic Alert System

The Rear Cross Traffic Alert System, abbreviated as RCTA, primarily assists during reversing by utilizing radar sensors on both sides of the vehicle to detect surrounding objects. In blind spots that cannot be seen through the rearview mirror, the radar effectively serves as an auxiliary tool to help drivers avoid collisions while reversing. The following are the functions of the RCTA system design: 1. When the vehicle is moving backward: It alerts the driver if there are vehicles approaching from behind. 2. When the vehicle is reversing: The RCTA system uses BSM radar to detect other vehicles moving in the blind spot behind the vehicle. 3. When a vehicle is approaching: If the RCTA system determines that an approaching vehicle from behind may collide with the vehicle, it will sound an alarm, and the BSM warning icons on both side mirrors will also flash, reminding the driver to reduce the possibility of a collision.

10

1

Share

What are the three filters in a car?

Automotive three filters refer to the air filter, fuel filter, and oil filter. The "three filters" play a filtration role for air, oil, and gasoline in the car engine, thereby protecting the engine. 1. Air filter: Ensures the air entering the engine is clean. There is a lot of dust suspended in the air, mainly composed of silicon dioxide, which is a substance harder than metal. Installing an air filter can reduce the wear of parts such as cylinders, pistons, and piston rings. If not installed, cylinder wear will increase by 7 times, piston wear by 3 times, and piston ring wear by 8 times. Therefore, modern car engines are equipped with air filters at the carburetor (or the intake control device of fuel injection engines). 2. Fuel filter: Ensures the cleanliness of fuel and prevents vapor lock. During storage, transportation, and refueling, gasoline inevitably mixes with some impurities and water. These impurities, along with the fuel, enter the fuel supply system and engine cylinders, accelerating cylinder wear. Before gasoline enters the fuel pump, it must be filtered to ensure the normal operation of the fuel supply system. 3. Oil filter: Filters the oil to ensure the normal operation of the engine, and is the most important among the three filters. During the use of internal combustion engines, mechanical impurities such as dust, metal shavings, and carbon will continuously mix into the oil. At the same time, the oxidation of oil by air and combustion exhaust gases will gradually produce gum. The mixture of mechanical impurities and gum will form sludge, which not only accelerates the wear of moving parts but also easily causes oil passage blockage. To ensure the cleanliness of the oil, the engine is equipped with an oil filter in the lubrication system.

5

4

Share

Is R the Reverse Gear?

The R gear on a car stands for the reverse gear, which is the abbreviation of the English word 'Reverse'. This function is indispensable in a car, as it allows the vehicle to move in the opposite direction and achieve reversing. In manual transmission models, it also has a hill-hold function. When parking on a downhill slope, the drive shaft can be mechanically locked by engaging the reverse gear, but this should not be overly relied upon. The primary braking of the vehicle is done through the braking system, as using the reverse gear for braking can be dangerous. Methods for using the R gear: 1. For models equipped with an automatic transmission: First, press the brake pedal and then press the safety button on the gear lever or push down the gear selector to engage or disengage the R gear. The R gear can be engaged when the transmission is in P or N, but switching between D and R requires passing through N. That is, the D gear must be shifted to N before shifting to R, which helps reduce the impact of reverse oil flow in the transmission during gear changes. 2. For models equipped with a manual transmission: First, bring the vehicle to a complete stop, then press the clutch and brake, shift into the R gear, and finally perform a semi-clutch operation with slight acceleration.

14

1

Share

Should You Press the Clutch When Turning a Car?

You should press the clutch when turning a car. When taking a sharp turn at high speed, you need to brake to reduce speed, press the clutch, and downshift. Not slowing down can lead to loss of control, and not downshifting may result in insufficient power after the turn, causing the car to shake or even stall. Specific turning scenarios: For wide turns, you may not need to shift gears—just control the speed and apply appropriate braking to slow down, then accelerate after the turn. For tight turns with a small radius, you should reduce speed or downshift in advance. In congested areas, use first or second gear, press the clutch, and rely on the car's idle speed to turn while keeping your foot on the brake to handle unexpected situations. Key points to remember when turning: First, adjust your speed according to the turn's sharpness, slowing down sufficiently to avoid skidding or losing control. If the car skids, immediately release the accelerator, steer the wheel toward the skidding side, and straighten the wheel once the car regains stability. Second, coordinate steering with the turn's curvature and the car's speed—apply appropriate steering angle, timing, and quick correction. Never let go of the steering wheel to prevent dangerous deviations.

5

3

Share

How Much to Turn the Steering Wheel When Making a Car Turn?

Generally, turn the steering wheel one full rotation for a normal turn; if it's a tight turn at a small intersection, turn the wheel one full rotation and then adjust with a little more angle if needed. For easier turns at larger intersections, you can start with half a rotation of the steering wheel and add a bit more angle if necessary. Precautions when turning the steering wheel: Avoid turning too early or too late. Turning too early may make it difficult for the inner wheels to pass, while turning too late risks the outer front wheels running off the road or hitting obstacles. The correct turning method is to drive along the outer line when moving forward, slightly adjusting the steering wheel when approaching the line to correct the path, then straightening the wheel to continue driving straight. If you judge that you cannot pass in one attempt, when the front wheels are about to reach the outer line, immediately turn the wheel back, depress the clutch pedal, and stop to prepare for reversing. Do not turn at high speeds; if the speed is too high during a turn, there will be no room to adjust the steering, which could lead to a minor tailspin or drift, or in severe cases, an accident. Generally, for gentle turns, turn the wheel early and slowly, and return it early and slowly; for sharp turns, turn the wheel late and quickly, and return it early and quickly. The angle of the steering wheel is larger for sharp turns and much smaller for gentle turns. Turning is mainly controlled by the left hand using a single-handed wrist rotation method, with the right hand providing auxiliary support.

9

1

Share

What does a flashing red dot in a car mean?

A flashing red dot in a car indicates that the vehicle's anti-theft function is activated. This indicator light flashes after locking the car, which is a normal phenomenon. If the light does not flash, it means the car is not properly locked or there is a malfunction in the anti-theft system. The car anti-theft system is a mechanical device and electronic product installed in the vehicle to increase the difficulty of theft and prolong the time required for theft. The car anti-theft system consists of an electronically controlled remote or key, electronic control circuit, alarm device, and actuators. The earliest car door locks were mechanical, only used to prevent doors from opening automatically while driving to avoid accidents, serving only for driving safety and not for theft prevention. Anti-theft door locks control only one door, while other doors are opened or locked using the door lock button inside the vehicle. Car anti-theft tips: Manual check after locking: Drivers are advised to develop the habit of manually checking whether the doors and trunk are properly locked after using the remote lock; Park in a safe place: It is best to park the car in a parking lot with fixed staff. In unattended environments, the safety factor is higher. Do not leave valuables in the car: No matter where the car is parked, do not leave personal belongings and valuables in the car, such as handbags, wallets, mobile phones, etc.; Install an anti-theft alarm: A car anti-theft alarm is also a useful tool. When a thief illegally enters the vehicle, a screaming anti-theft alarm can effectively increase the psychological burden on the thief.

10

4

Share

Does Canceling the Subject One Exam Reservation Have Any Impact?

What is the Rear Cross Traffic Alert System

What are the three filters in a car?

Is R the Reverse Gear?

Should You Press the Clutch When Turning a Car?

How Much to Turn the Steering Wheel When Making a Car Turn?

What does a flashing red dot in a car mean?

What are the consequences of mixing different antifreeze?

Is the brake on the left or right in an automatic transmission car?

What Causes the ABS Light to Illuminate in a Truck?

Buzzing Noise During Car Acceleration